Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹82.2 LAccepted-AOC 00 JAI BHAWANI COMPLEX MAIN ROAD SADAR WARD JAGDALPUR BASTAR CHHATTISGARH 494001 UDYAM CG 01 0003803 | BASTAR | CHHATTISGARH | 494001 | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹98.8 L+₹12.7 L (14.8%)Rejected-Finance D 1 KHOTTA TOLA KUNGRAGHAT GORAKHPUR | GORAKHPUR | GORAKHPUR | UTTAR PRADESH | 273008 | L2 | Rejected-Finance Higher than L1 | |
| 3 | L3₹1.0 Cr+₹17.2 L (20.0%)Rejected-Finance | L3 | Rejected-Finance Higher than L1 | |
| 4 | L4₹1.1 Cr+₹20.7 L (24.0%)Rejected-Finance 245A 7A 1 JAYANTIPUR GOKUL AVAS YOJANA SULEM SARAI ALLAHABAD PRAYAGRAJ | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211011 | L4 | Rejected-Finance Higher than L1 | |
| 5 | L5₹1.2 Cr+₹38.4 L (44.6%)Rejected-Finance 11 GURU NANAK MARKET AMBALA ROAD SAHARANPUR 247001 | SAHARANPUR | UTTAR PRADESH | 247001 | L5 | Rejected-Finance Higher than L1 |
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
11 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(AF) Bamrauli
HQ CWE(AF) Bamrauli, Prayagraj, PIN - 211012
Addition and Alteration to Hander
2023_MES_584074_1
87257/E8
Open Tender
Civil Works
Item Rate
182 days
Gorakhpur
As per NIT
8 documents required · 8 mandatory
₹1,000
GE(AF) GORAKHPUR
₹2.1 L
Yes
23 May 2023
3 Mar 2023
18 Apr 2023
3 Mar 2023
11 Apr 2023
28 Mar 2023
3 Mar 2023 - 11 Mar 2023
Amount
M & L for 75mm thick PCC 1:3:6 type C-2 using40mm graded stone agg as in plinth protection, complete all as specified and directed.
M & L brick work with sub class `B' bricks, in CM 1:6 straight or curved on plan exc 6 m mean radius, complete all as specified and directed.
M&L for Brick work with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls, built CM in 1:4 complete all as specified and directed.
M & L powder coated anodised aluminium (sliding/hanging type) windows/ventilator with three track bottom track size 92 X 29.5 X 2mm thick, side & top track frame size 92 X 29.5 X 2mm thick and shutter aluminium anodised 39 X 20 X 2 mm thick incl necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass in panels incl all fittings & fixture complete all as specified and directed.
M & L powder coated anodised aluminium doors (sliding/hanging type) with frame size 101.6 X 44.75 X 2.4mm thick and powder coated anodised aluminium shutter having Lock Rail 44.45X 47.62 X 2.02mm, style 44.45X 47.62 X 1.95 mm, Top Rail 101.60X 44.45 X 1.93mm, and bottom rail 101.60X 44.50 X 2.5 mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos, aluminum handles 150 mm 02 nos, Aluminium tower bolts 200mm 01 Nos, brass mortice lock 4 lever, hydraulic door closer of suitable capacity 01 No.,Aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with panelling in two parts with 12 mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings & fixture complete all as specified and directed.
M&L powder coated anodised aluminium partition with frame size 101.6X44.45X 2 mm thick and intermideate frame size 101.6X44.45X 2 mm thick incl necessary aluminium fittings jointing cleats,glazing cleats,rubber packing anodised aluminium shape beading, screws etc with panelling in two parts with 5 mm thick plain glass in upper panel and 5 mm thick aluminum composit panel sheet in lower panel incl aluminum angles and all fittings & fixture complete all as specified and as direceted.
M & L powder coated anodised aluminium grill wt n exc 5.60 Kg per sqm with all fittings & fixture, complete all as specified & directed.
M & L for soundproof acoustic window with aluminium frame of suitable size for fixing of two layers of glasses, each of thickness of 12 mm, having 8 mm the gap in between two glass panel to be filled with sound froof insulation materials which reduced the sound upto 40dB. Acoustic preformance of the window shall be 43 STC, window included acoustic seals, fastners, handles, tower boldts etc.complete all as specified & directed.
M & L for Armstromg Knof channled woodworks perforated panels of width 192mm, thickness 15mm and length 2400 mm, made of a moisture resistant fibre board substrate with a laminated facing as per the apporoved shade (Portland Maple, Sea Beach, Saim Wood & Mystique Walnut, interior white , Alumina Pearl) and a melamine balancing layer on the reverse side. The board shall have a special perforation pattern where the reverse surface has a "Helmholtz" fluted perforation with consecutive 3 mm wide groove followed by 13/21 mm visible pane . The edges of the panel shall be "tongue-and-grooved" to fix special clips for installation and seamless visual. The back of the perforted panels shall have sound absorbing non-woven acoustical fleece hot pressed to achive NRC upto 0.6. (Averag valuee of absorption Co-effecient readings taken at 250 Hz,500 Hz, 1000 Hz and 2000 Hz) as per ASTM-C423 and humidity resistance (RH) of 70% of camber limit less tha 1mm/1000mm and bow less than 1mm/300mm. The panels shalll be mounted on special aluminium splines (keel) using inside clips provided by Knauf, complete all as specified and directed.
M & L for sound proof acoustic wooden door of frame size 110mmx100mm and shutter thickness 60mm of sound proof insulation materilas of acoustic perormance of 37 STC, door includes EPDM Gasket, Door handle - 02 Nos, Mortise deadlock set with cylinder-01 No, Hinges-03 Nos, drop down seal and door closer, the finish of door shall be veneered face, complete all as specified and directed.
M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe- 410-W (Gde E-250) quality 'B', complete all as specified and directed.
M&L for Pre-painted(camouflage pattern) galvalume aluminum zinc coating(minimum 275 gram per sqm) GI based corrugated steel sheet 0.50mm thick, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, as specified and directed. (Note - Camouflage pattern shall be approved by GE)
M&L for Pre-painted(camouflage pattern) galvalume aluminum zinc coating(minimum 275 gram per sqm) GI based plain steel sheet 0.50mm thick, having tensile strength of 550 Mpa as in ridges/hips/valley gutters, fixed with self tapping screws, as specified and directed. (Note - Camouflage pattern shall be approved by GE)
M&L for 2.00 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall, as specified and directed.
S&F PVC/Nylon bird proofing, mesh size 25 mm X 25 mm , made of minimum 0.8 mm thick yarn, , having minimum braking strength of 20 Kg, all as specified and directed
S&F Anodised aluminium snap grid frame work of size 605x605mm for false ceiling including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.
M&L for 4.0 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed.
Roughening surfaces of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0 Kg of cement per Sqm, all as specified and directed.
M&L for preparing the roof surfaces and applying a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm and laying APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) over roof surfaces by force application, all as apecified and directed.
M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate finished even and fair without using extra cement as in roof, all as apecified and directed.
M&L for PCC machine pressed tile 250X250X22 mm, jointed & pointed in neat cement slurry laid in floor over 12 mm thick screed bed in cement mortar 1:3 , all as apecified and directed.
M&L for providing PCC 1:2:4 type B0 using 12.5mm graded stone aggregate finished even and smooth without using extra cement as in roof kerb, coping including mixing of integral liquid water proofing compound Dr. Fixit Pidiproof LW + as per manufacturer instructions complete all as specified (Note - WPC shall be measured and paid for separately)
M&L Rough cast wired glass, 6.4mm thick and glazing with oil putty in square area of each pane exc 0.5 sqm but n.exc .75 sqm, complete all as specified and directed.
M&L for Double charged vitrified coloured ceramic tiles (light shade) 10 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles complete all as specified and as directed.
M&L for vitrified coloured ceramic tiles (light shade) 10 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles complete all as specified and as directed.
M&L for glazed ceramic tiles in vertical surface 300x450mm x 7mm, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles complete all as specified and as directed.
M&L for screed bed (or) bedding layer 15mm thick in CM (1:6) for laying floor finish as complete all as specified.
M&L for rendering 10mm thick in cm (1:4) for fixing of tiles on vertical surfaces of wall complete all as specified & directed.
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement , using water proofing compound @ 2% by weight of cement , complete all as specified as directed.
M&L for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified as directed.
M&L for 15mm thick screed bed or bedding layer of mortar in CM 1:4, using Liquid Water Proofing Compound as per manufacturer's instruction, laid in roof finisshed even and smoooth without using extra cement, complete all as specified as directed. (Note -WPC shall be paid separately)
Supply only liquid water proofing compound
M&L for two coats of exterior emulsion all weather coat in camouflage pattern over a coat of primer on newly plastered surfaces of external wall including preparation, all as specified as directed.
M & L preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by removing the complete existing treatment by scrapping, washing, rubbing down & stopping etc and applying two coats of exterior emulsion all weather coat in camouflage pattern over one coat of alkali resistant primer , complete complete all as specified and as directed.
M & L for preparation of new plastered surfaces and applying two coat of oil bond distemper over a coat of primer and 2 mm thick wall care putty, complete all as specified & directed. (Note - Primer & distemper/Paint will be applied by sparaying with mechanical means)
M & L Complete removal of old treatment and preparation of surfaces and applying two coat of of oild bond distemper over a caot of primer and 2mm thick wall care putty,complete all as specified & directed. (Note - Primer & distemper/Paint will be applied by sparaying with mechanical means)
M&L for preparation of old steel surfaces exceeding 10cm width or girth and applying one coat of aluminiuml paint over one coat of aluminium primer complete all as specified & directed.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
S&F in repair rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 ltrs capacity incl 20 mm brass ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F Galvanised iron water tubing 15 mm bore medium grade galvanised including short lengths fixed to wall / concealed in wall /ceiling or laid in floor complete with all fittings, such as bend, elbow,tees, short pieces,connectors,back nuts diminishing pieces, cap and plugs,unions etc, all as specified and directed.
S&F Galvanised iron water tubing 20 mm bore medium grade galvanised including short lengths fixed to wall / concealed in wall /ceiling or laid in floor complete with all fittings, such as bend, elbow,tees, short pieces,connectors,back nuts diminishing pieces, cap and plugs,unions etc, all as specified and directed.
S&F in repair angle cock, long shank fancy type C.P. cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore, complete all as specified and directed.
S&F 32 mm bottle traps of PTMT having minimum water seal of 25mm, complete all as specified and directed.
S&F in repair Bib tap 15mm dia fancy type chromium plated with lonk shank with flange screwed, complete all as specified and directed ,
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450mm, all as specified and directed ,
S & F, 15 mm dia Brass CP mixer for mixing hot and cold water screwed down fixed in wash basin, complete all as specified and directed.
S & F in repair, stainless steel health faucet for 15 mm fixinf arrangements, complete all as specified and directed.
M & L for 150mm Cast iron rainwater socketed pipes with cement joints, witht ears, complete all as specified and directed.
S&F PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110mm bore fixed to walls, complete all as specified and directed
S&F PVC (SWR) bends, 110 mm, complete all as specified and directed.
S&F PVC(SWR) junction single, (Single Tee) equal or unequal 110mm bore, all as specified and directed.
S&F PVC Slotted vent cowl, 110 mm, all as specified and directed.
S&F in repair Vitreous china wash down Water closet Pedestal pattern, white including fixing of flush, nut bolts, flush pipe etc, complete all as specified and directed
S&F in repair PVC flushing cistern low level white, 10 Ltr capacity, complete all as specified and directed
S&F Plastic water closet seat cover, black/white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices, complete all as specified and directed
S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe 32mm complete all as specified and directed.
S&F in repair Viterous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, bedding urinal against wall in cement mortor (1:2) including urinal spreader, complete all as specified and directed.
S&F Grating doom 100 mm dia of PTMT.(Minimum weight 25 gms), complete all as specified and directed.
S&F in repair Soap dish holder, chromium plated, all as specified and directed.
S&F in repair Toilet paper holder of vitreous china fixed to walls with chromium plated, brass screws complete all as specified and directed.
S & F Towel Rail 600mm long chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.
M & L for stainless steel kitchen plate rack of size 450mm x 750mm, complete all as specified and directed.
S & F in repair stainless steel drapary rod platic coating fency type 25mm dia incl brackets and two Nos globe at end with necessary fixing arrangements, complete all as specified and directed.
M&L Greasing and servicing of Hanger door of height 10.00 mtr and width of each leaf of door is 7.00 Mtr, ervicing include to change of 06 Nos roller of suitable dia in each leaf, complete all as specified and directed.
Dismantling of brick tiles any thickness laid, bedded and pointed in any mortar from roof (Ist floor) (cost of necessary scafolding and removal of the material out side MOD land, complete all as specified and directed.
Dismantling/demolition and removal of mud in roofs, any thickness, including old tarfelt, plastering /PCC and leeping of any thickness as reqd at site and removal of the material out side MOD land, complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).
Dismantling of Plain or corrugated steel/fibre sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
Taking down chawkhats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each including cutting holes for removal of hold fast and removing from site complete all as specified and directed.
Taking down chawkhats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm but not exceding 4 sqm each including cutting holes for removal of hold fast and removing from site complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
Taking up or down steel tubing 15mm bore including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down steel tubing 20 mm bore including cleaning for refixing or removal from site complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc
M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete for One light point controlled by one switch, all as specified and directed.
All as per Item No. 80 above but for One fan point controlled by one switch.
All as per Item No. 80 above but for One exhaust fan /wall fan point controlled by one switch .
All as per Item No. 80 above but for One socket point controlled by one switch on same board.
All as per Item No. 80 above but with 1100 volts grade copper standard conductor cable of size 2.5Sqmm with 1.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet15Amp independent board complete all as specified and directed.
M/L for Sub Main Wiring with Two single core PVC insulated cable of size 1.5 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and 1.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 1.5 Sqmm Wire and One No of 1.0 Sqmm Earth wire in One RM length Measured as one unit length.
M/L for Switch piano flush type AC 230 volts 5 Amps single pole one way, complete all as specified and directed.
M&L Switch piano, flush type single pole, one way 15 Amp,complete all as specified and directed.
Supply & fix LED High bay 120W, complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louver,complete all as specified and directed.
M&L for socket outlet 5 Amps,5 pin flush type multipurpose,230 volts AC circuit complete all as specified and directed.
M&L for socket outlet 2 in 1,3 pin 5 & 15 Amps,230 volts AC circuit, complete all as specified and directed.
Supply and install high wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.0 TR,electric driven single phase complete all as specified and directed.
Supply and install high wall split units indoor/outdoor complete with cordlessremote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR, complete all as specified and directed.
Supply and fix air cooled split unit air conditioner electric driven single phase of capacity of 2 TR, 3 star rated EER 3.2 suitable for cooling and heating type split AC,with cordless remote control unit and with in built air ioniser, electric driven single phase complete all as specified and directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% suitable for AC upto 2 TR, complete all as specified and directed.
M/s Comfort Air Conditioning and Refrigeration Engineers
M/s Suresh Traders
R.K.ASSOCIATES
Rajan Traders
M/S RAJEEV KUMAR
OM INFRA
Hindustan Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .