Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC | L1 | Accepted-AOC Work order issued. | |
| 2 | Rejected-Technical | - | Rejected-Technical Not responsive | |
| 3 | Rejected-Technical | - | Rejected-Technical Not responsive |
| Sl No | Description | Qty | Unit | LALSINGH CONTRACTOR L1 | SUNDAR RAJ L2 | C JEGASLAL L3 |
|---|---|---|---|---|---|---|
| 1.00 | Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. (50% Relaying old Sheet) | 128 | m2 | 1,072 ₹1,37,216 Lowest | 1,094 ₹1,40,032 | 1,115.88 ₹1,42,832.64 |
| 2.00 | Dismantling Existing Sheet Roofing without roof timbers | 375 | m2 | 80 ₹30,000 | 18 ₹6,750 Lowest | 18.36 ₹6,885 |
| 3.00 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.700 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. | 19 | m2 | 2,500 ₹47,500 Lowest | 3,689 ₹70,091 | 3,762.78 ₹71,492.82 |
| 4.00 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification | 39 | kg | 96 ₹3,744 Lowest | 113 ₹4,407 | 115.26 ₹4,495.14 |
| 5.00 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers. | 16.5 | m2 | 800 ₹13,200 Lowest | 1,169 ₹19,288.5 | 1,192.38 ₹19,674.27 |
| 6.00 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500,Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) | 83 | kg | 114 ₹9,462 | 92.5 ₹7,677.5 Lowest | 94.35 ₹7,831.05 |
| 7.00 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) | 225 | m2 | 226 ₹50,850 | 180 ₹40,500 Lowest | 183.6 ₹41,310 |
| 8.00 | Desilting light or sandysoil or silt from infiltration wells below water level including the charges for special T&P and air compressor etc. complete | 26 | m3 | 500 ₹13,000 Lowest | 2,504 ₹65,104 | 2,554.08 ₹66,406.08 |
| 9.00 | Dewatering using 3HP to 70HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete -Hire charges for Diesel Pump set for 3 HP | 3 | hr | 1,500 ₹4,500 | 290 ₹870 Lowest | 295.8 ₹887.4 |
| 10.00 | Wiring with 2x1.5sq.mm. PVC insulateSC unsheathed FRLS copper conductor of 1100Vgrade insuitablePVCrigidpipeonwall and ceiling with PVC accessories and with TW switchbox and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil) | 5 | point | 1,649 ₹8,245 Lowest | 2,026 ₹10,130 | 2,066.52 ₹10,332.6 |
Tender Value
₹5 L
EMD Value
₹5,000
Closing Date
17 Jun 2026, 3:00 pmClosed
Commissioner
Padmanabhapuram Municipality
Renovation of Amma Unavagam in Ward 12 in Padmanabhapuram Municipality
2026_MAWS_679073_1
721/2026/E1-1
Open Tender
Civil Works
Works
30 days
Padmanabhapuram Municipality
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹5,000
Yes
9 Oct 2026
1 Jun 2026
17 Jun 2026
1 Jun 2026
17 Jun 2026
1 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. (50% Relaying old Sheet) | 128 | m2 | - | - |
| 2 | Dismantling Existing Sheet Roofing without roof timbers | 375 | m2 | - | - |
| 3 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.700 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. | 19 | m2 | - | - |
| 4 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification | 39 | kg | - | - |
| 5 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers. | 16.5 | m2 | - | - |
| 6 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500,Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) | 83 | kg | - | - |
| 7 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) | 225 | m2 | - | - |
| 8 | Desilting light or sandysoil or silt from infiltration wells below water level including the charges for special T&P and air compressor etc. complete | 26 | m3 | - | - |
| 9 | Dewatering using 3HP to 70HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete -Hire charges for Diesel Pump set for 3 HP | 3 | hr | - | - |
| 10 | Wiring with 2x1.5sq.mm. PVC insulateSC unsheathed FRLS copper conductor of 1100Vgrade insuitablePVCrigidpipeonwall and ceiling with PVC accessories and with TW switchbox and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil) | 5 | point | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
BOQ_815863.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .