NIT NO-08 ITEM NO-03

S/o submersible pump set fitted with dynamically balanced SS impeller mounted on stainless steel shaft protection sleeve EP stage bowl of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on three phase AC, 415 volts ,50Hz, 5 HP, Model No J46, Head-70 Mtrs, Discharge-200 LPM, Pump OD:- 96mm.MAKE:BS/KSB/Crompton/DJB APPROVED

Supply of Automatic LT Panel Board suitable for 415 Volts, 3 Phase, 50 HZ, 4 wire system for operation of up to 15 HP submersible set, made out of not less than 2 mm thick CRCA for load bearing members and 1.6 mm for doors of panel, Totally enclosed, dust and vermin proof, floor mounted type. The panel size 760 mmX 1360 mm X300 mm and having (1) 63 amp change over- 1 No (2) 63 A TPN MCCB -1 No (3) Amp meter 0-50 A- 1 No (4) Voltmeter 1 No (5) Amp & volt meter selector switches-1 set (6) Auto-manual + Light + control MCB TP 32 Amp- 1Nos each (7) CT -3Nos (8) Push button + ON/OFF light 2 Nos each (9) 5 KVAR Shunt capacitor- 1 No (10) Aluminium Bus bar size 25 mm X 6 mm - 1set (11) 15 HP Star Delta starter (a) 32 Amp Power contactor-3 Nos (b) overload relay 14-23 A -1 No (C) Star delta timer- 1 NO ( d) QT Timer -24 Hours -1 No (e) Motor Protection relay 200 Short circuit, earth fault, Phase loss, unbalance, phase reversal, locked rotor protection Make:-Subtec/protech/ L&T/All DJB Approved Make

S/o PVC insulated flat submersible cable with copper conductor having three core Size 2.5 sq mm 1100 volts(100mtr per roll). Make- Gloster/Universal/Havells/DJB Approved

S/o G.I Pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. Make- Jindal/TATA.

S/o G.I Tail piece 40mm dia 600mm long medium class with threaded externally on both end. Make- Tata/Jindal

S/o GI Socket 40 mm dia with threaded internally. MAKE: Jindal/Tata/DJB Approved

S/o GI elbow with both end having thread, Size- 40mm. MAKE: Jindal/Tata/DJB Approved

S/o GI reducer having thread on boyh end, Size: 50mm to 40mm. MAKE: Jindal/Tata/DJB Approved

S/o GI Union having thread on both end, Size: 40mm. MAKE: Jindal/Tata/DJB Approved

S/o MS clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc.