Renovation works at ACCS Lab and DGQA Toilet

Amount

Disposal of moorum/building rubbish/ malba/similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix)

Demolishing R.C.C. work manually/ by mechanical means including tacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in-charge.

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre:150 mm diameter C.I. pipe

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.(a) Internal Work- Exposed on wall

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Wall painting with Pemium emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats including white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Finishing walls with Apex Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing approved quality and make S.S. mosquito mesh of 304 grade in aluminium doors, windows, ventilators etc.with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and as per the directions of Engineer-in-charge .

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in ll shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :For pipes 100 to 250 mm diameter

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC (Noise reduction coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece.

Providing and laying PVC flooring 2mm MAT including fixing with the Favi solution including reaparing the floor etc. complete (Make:Responsive or equivalent)

Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of to IS : 2046 Type S, including cost of adhesive of approved quality1.0 mm thick

French spirit polishing : Two or more coats on new works including a coat of wood filler

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378).250x10 mm

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):Rectangular or square

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 45 x 85 mm

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Making core cutting upto 300mm dia.at required area as per direction of engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.25 mm nominal dia Pipes

Providing and fixing 75mm dia PVC soil waste and vent pipe conforming to IS:13592 of SWR quality of 6kg /cm2 pressure including all fitting, like EG: bends, tees ,elbows, collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring/ solvent cement by application of leak proof adhesive like FRP paste including cutting holes in walls and floors and making good.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:150 x 100 mm size P type With sewer bricks conforming to IS : 4885

Providing and fixing Mapson nexan omega long body water tap for modular kitchen & batheroom Bib tap faucet (wall mount installation type)

Providing and fixing Hindware Basin area angle valve addons F860007- CHROME

Providing and fixing wall mount EWC 20082 Marino make:Hindware, with necessary plumbing, chair bracket, cutting the wall , making good etc complete.

Hindware desingner plastic cistern for bathroom I made of PVC I single flush I with patented odoriser slot I wave.

Providing and fixing HINDWARE F160110CP brisk health faucet , 1.25m long stainless steel flexible tube and ABS wall hook- jet spray for bathroom.

P&F 100 mm inlet and 75 mm outlet PVC trap with stainless steel grating (with or without hole for PVCwaste pipe of ACHILLY/NOWAY make) including the cost of cutting and making good the walls and floors etc. complete as per directions of engineer- in- charge

Providing and fixing 110mm dia PVC soil waste and vent pipe (including specials) conforming to IS: 13592 of SWR quality of 6kg /cm2 pressure including doors, cowls, offsets, access pipe, jointing with rubber ring /solvent cement by application of leak proof adhesive like FRP paste including cutting holes in walls and floors and making good.

Providing and fixing Cera colmid Snow white table top wash basin with stainless steel bottle trap with built in anti foul pipe for washbasins with 5 inches pop up waste coupling etc. complete

Providing and fixing Jaquar lyris series table mounted regular cold only basin tap, top lever brass body water tap Model:- LYR-CHR-38011 complete as per EIC.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 2.5mtr, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:All kinds of soil

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size,Size of Tile 600 x 600 mm.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm. (Note : Basic Rate of granite is considered Rs 2000/sqm).

Providing and fixing 3 mm alstone ACP sheet or equivalent with vinyle tape cutting and chemical lammination as per design approved by engineer-in-charge.

Providing and fixing house plate of Rowmark sheet (silver and gold ) with engraving doneon it and fixed on black acrylic sheet of 3 mm thickness approved by engineer-in-charge.

Supplying and drawing 1x1.5 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and drawing 3x2.5 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and drawing 3x4 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and drawing 3x6 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and fixing of 25 mm medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing 2 modules (75mmx75mm), Gl box alongwith modular base & cover plate for modular switches in recess etc. as required

Supplying and fixing 4 modules (125mmx75mm), Gl box alongwith modular base & cover plate for modular switches in recess etc. as required

Supplying and fixing 6 modules (200mmx75mm), Gl box alongwith modular base & cover plate for modular switches in recess etc. as required

Supplying and fixing 8 modules (125mmx125mm), Gl box alongwith modular base & cover plate for modular switches in recess etc. as required

Supplying and fixing 12 modules (200mmx150mm), Gl box alongwith modular base & cover plate for modular switches in recess etc. as required

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing 5/6 amp modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required

Supplying and fixing 15/16 amp modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required

Supplying and fixing 3 pin 5/6 amp modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required

Supplying and fixing 6 pin 15/16 amp modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and fixing of 5A to 32A rating, 240V, 10kA, “C” curve, DP miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple Pole

Supplying and fixing following way, horizontal type, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4+18), Double Door TPN MCBDB

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, blanking plates, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator). 12way, Double door SPNDB

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Make as per approved list.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required, including end connections to RJ 45 sockets including crimping, jointing etc. as required all complete. 4 pair UTP CAT 6-2 run of Cable

Supplying of LED luminaire as per below mentioned specification of make/brand as per approved list in DTS and fixing of the same in the ceiling by providing required downrods/ chainlinks/ clamps, anchor bolt-nuts, washers, making electrical connections, earthing etc., as required/ directed by engineer-in-charge Type :- Direct-indirect LED luminaire with uniform light distribution. Mounting:- Recess mounting type in false ceiling System lumens :- Not less than 3300 lumens System rated power :- 230V, 50Hz, 34Watts (+/-10%) Color temperature :- Not less than 5700K Housing :- White powder coated deep drawn housing. Diffuser :- Unique floating spherical high efficiency translucent (HET) PMMA diffuser for direct light. Circular geometry in to the ceiling plane for visual interest. Surrounding circular light chamber containing PMMA diffuser for indirect light. Driver :- Electronic driver pre-wired up to terminal block. Ref :- Similar to Wipro-Opus: LM38-461-XXX-57-XX

Supplying & Laying of following size LT power cable with Copper conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 4C X 16 Sq mm size.

Supplying & Laying of following size LT power cable with Copper conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 4C X 6 Sq mm size.

Supplying and making end termination with double compression gland and Tinned COPPER lugs for 4core X 16sqmm size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 650V/ 1.1 kV grade as required.

Supplying and making end termination with double compression gland and tinned COPPER lugs for 4core X 6sqmm size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 650V/ 1.1 kV grade as required.

Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

Releasing and returning to stores the size of 3/4" to 1 1/4 " dia ( 20 mm to 32 mm ) pipe with all accessories viz., collars, bends, elbows and flexible wires inside pipes etc., below floor / ground or in existing duct as required. (Necessary excavation, refilling, etc., shall be measured and paid separately).

Releasing and stacking in the stores of existing CFL light/tube light fixtures (down lighter/ 2'x2' lumniere / Tube light with batten etc), ceiling fans/ wall mounted fans with accessories etc by disconnecting the power supply and sealing the ends with insulation tape and as the case may be as required and as directed complete.

Releasing and stacking in the stores of switch, sockets modular type or piano type or bell push etc of any make or any number of way by disconnecting the power supply and sealing the ends with insulation tape and as the case may be as required and as directed complete.

Releasing of various sizes of PVC insulated all type of copper/ aluminium wires sizes up to 6.0 sqmm from existing Condiut pipes along with accessories, coiling the released wires, transportation and returning the same to stores along with all the accessories as directed.

Releasing and stacking in the stores of all type of switch boxes / MCB DBs, MCB, all type (sheet steel/ wooden) enclosures by disconnecting the power supply and sealing the ends with insulation tape and as the case may be as required and as directed complete.

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B

Supply and fixing 3 pin, 5 A ceiling rose on the existing junction box/wooden block including connection etc. as required

Supplying and fixing PVC batten/ angle holder on the existing junction box/ wooden block including connection etc as required.

Supplying of LED luminaire as per below mentioned specification of make/brand as per approved list in DTS and fixing of the same in the ceiling as required/ directed by engineer-in-charge Type :- LED Bulb. System lumens :- Not less than 900 lumens Color temperature :- Not less than 6000K System rated power :- 230V, 50Hz, 9 Watts (+/-10%) Ref.:- Similar to Crompton DynaRay 9 Watt LED Bulb - LED9WDFWBCDL

Supplying of LED luminaire as per below mentioned specification of make/brand as per approved list in DTS andfixing of the same in the ceiling by providing requiredclamps, TW guttas, bolt-nuts/screws, washers, making electrical connections, earthing etc., as required/ directed by engineer-in-charge. Type :- Polycarbonate lenior batten LED tube luminaire. Mounting: Surface mounting type. System lumens :- Not less than 1800 lumens. System rated power :- 230V, 50Hz, 20Watts (+/-10%) Color temperature :- Not less than 6000K. Diffuser :- High optically efficient diffuser. Driver :- Inbuilt electronic LED driver. Ref :- Similar to Wipro-Garnet 20 W LED batten, Part no- D532065

Supplying & erecting of 6 inch sweep, single phase, metallic body exhaust fan with mesh cover/ automated shutters & all accessories and installation of the same by providing suitable bolt & nuts/ screws, making wall opening and making good the damages, making electrical connections, earthing, testing etc., as required. The electrical connections shall be made by providing suitable size PVC insulated flexible copper cable from already provided ceiling rose as required. Make - Crompton/Havells/Bajaj

Providing and laying Visiaro soft copper tube, outer dia 5/8", wall thickness 20(L) SWG

Providing and fixing Visiaro round soft copper tube, 15mtr, outer dia 1/4", wall thickness 25 SWG, seamless hollow pipe coil

Supplying installation , Termination, Labeling & Testing of RJ-45 modular jacks, complaint with ISOIIEC11801 NSI/TIA/EIA-568, should accept solid 22-24 AWG diameter conductors with certified for UL94V-O rated, series connecting hardware standards. CAT6 (GREEN OR YELLOW) for data make comscope/panduit/legrand/Dlink.

Irfan Ahmad (BID ID -418284)

RATTAN BUILDERS PVT LTD (BID ID -418298)