Repair work for non burning LED lighting replacement of fault cable and service main for eco park at ward 31

Amount

Replacement of Non burning post top LED lentern fitting Drive and Batchcard

Supply and fixing of 50 mm dia G.I. Pipe (Class B) of 3 metre Length with 300mm x 300mm x 6mm MS Base Plase duly welded at the bottom with concreting and constrution of masory pedastal with suitable synthetic moulded compound box to house 6A SP MCB with door and lock and key arrangements with supply and erection of LED post top lantern fitting with Pure Polyester UV resitant Powder coated die cast aluminium housing with clear Diffuser for uniform illumination suitable for 20 to 40W LED Lamp with holder and lamp complete set with PVC unsheathed Copper leads and painting with suitable colour

Supply and erection of LED post top lantern fitting with Pure Polyester UV resitant Powder coated die cast aluminium housing with clear Diffuser for uniform illumination suitable for 20 to 40W LED Lamp with holder and lamp complete set.

Supply and erection of Synthetic moulded compound box for street light with 6A SP MCB with necessary PVC unsheathed Copper leads from termined to the fitting.

Concreting and constrution of masonry pedastal for the existing street light poles including charges dismantling of connecting cables and giving connection etc.,

Supply and laying of 2x6sq.mm PVC armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good .

Supply and laying of 4x16sq.mm PVC armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good .

Supply and fixing of 4x16 sq.mm brass cable gland with earth connection

Supply and fixing of brass cable gland for 2x10sq.mm PVC armoured LTUG cable with earth connection.

Supply and laying of 3-1/2 x 120 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15metre layer of sand and covering the cable completely with brick sand and refilling the earth to make good

Supply and fixing of 200A fuse Unit (500V)

Supply and fixing of 3phase 200A aerial fuse unit for 3Nos. 32A fuse units(500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps

Supply and run of 4x16sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 50mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains

Supply and run of 4x16sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wire for service connection mains

Add GST 18%

BALAJEE ELECTRICALS (BID ID -1165924)