CWEK/TOKEN-67/969 EWS/2025-2-SPECIAL REPAIR TO BLDG NO P-02, P-11, P-30, T-72, T-73, T-102 and T-157 ALONGWITH EXISTING WATER PIPE LINE AT VARIOUS LOCATIONS IN THE AOR OF AGE B/R-I and AGE E/M UNDER GE 969 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.63 mm thick, galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs,walls etc with grade of zinc coating 120 grams per square metre complete all as specified.

S&F 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed ) with grade of zinc coating 120 grams per square metre complete all as specified.

M&L preparing new zinc (or galvanized) surfaces to receive painting by coating with mordant solution including washing and cleaning etc. of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer as approved by GE of any shade/colour in camouflage pattern complete all as specified.

Demolition of brick work, PCC block masonary, stone masonry or boulder masonary built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 .complete all as specified and directed.

M&L for walling of random rubble masonry uncoursed, well bonded , bedded and solidly hearted built in CM 1:4 complete all as specified.

M&L for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling,uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n. exc 40mm, granite or trap stone complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks 1:2:4, type B1 (using 20mm graded stone aggregate), exc. 10 cm in width and setting in CM 1:4, complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping including form work complete all as specified.

M&L for rendering 15 mm thick on stone masonry sufraces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry sufraces or surface other than fair face of brickwork or on one side of lathing in CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.

Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc. all as specified and directed.

M&L rendering 15 mm thick on brick work or concrete surface in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering plaster 15 mm thick on brick work or concrete surface in CM 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

Dismantling timber scantling 40 sq cm and over in any section and any position as in unframed work, complete all as specified and directed.

M&L 2nd class soft wood (Kail) as in scantling, clean swan timber framed and fixed, complete all as specified

-Ditto- all as per ser Item No 19 here-in-before but except timber, all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets complete all as specified and directed.

S&F in repair wooden panelling with tongued & grooved joint laminated over high quality DHF,8mm to10mm thick fixed to timber framework in any position complete all as specified. Note :-Unit rate inclusive of timber frame work.

M&L for 9 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work in partition complete all as specified and directed.

Dismantling timber scantling in fillets rails, posts purlins etc under 40 Sqcm in section in framed work complete all as specified and directed.

S&F second class soft wood (Kail) plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm complete all as specified and directed.

M&L 2nd class soft wood (Kail) 20 mm thick in facia/eaves boarding fixed with nails in any situation planed one side with butt joints, complete all as specified and directed.

S&F in repairs prelaminated wooden flooring12mm thick as in in floors including 5mm thick foam, 15mm thick, planed one side and edges tongued and grooved or rebeated as in flooring fixed with nails in floor, complete all as specified and directed. Note: Colour and shade of tiles shall be approved by GE.

M&L sheet glass ordinary quality 4.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden doors and windows frames, all as specified.

S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L 75 mm thick plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in flooring complete finsihed even and fair complete, all as specified and as directed.

M&L 40 mm thickness cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) as in flooring complete finished even and fair complete all as specified and as directed.

M&L for machine cut Kota stone slab flooring 18-20mm thick over and including 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges if required complete all as specified and directed.

M&L for non skid coloured printed ceramic tile 8 to 10 mm thick (square /rectangular /in joint less) exceeding 0.11 Sqm but not exceeding 0.18 sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over and including 15 mm thick screed bed in CM 1:4 complete, all as specified.

M&L for glazed ceramic tiles in vertical surface 350x250x7mm/450x350x7mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over and including 15 mm thick cement plaster using CM 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pegment complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in lintel upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in roof, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6, type C-1 ( using 20 mm graded stone aggregate) as in path/pavings/ floor/plinth protection etc laid in bays including finishing the concrete surface even and smooth without using extra cement complete all as specified.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed

S&F 2nd class soft wood ( Kail) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed

S&F 2nd class 30 mm thick soft wood (Kail) glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats size of members of shutters as specified in SSR Part - I section 8 Clause 8.23 (b) for windows, ventilators etc are provided with stiles and rails, complete all as specified.

S&F MS cold rolled butt hinges medium weight 75 mm long complete all as specified.

S&F aliminium anodised barrel tower bolts, 75 mm long complete all as specified.

S&F aluminium anodised handles, cast type anodised 125 mm long complete all as specified.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified.

S&F plain factory made, framed, panelled shutters of thickness 35 mm of 2nd class softwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, SSR Part I, 2009, all as specified.

S&F M S butt hinges 100 mm long medium weight, cold rolled mild steel, complete all as specified.

S&F butt hinges 100mm long extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified.

S&F aluminium anodised, barrel tower bolts 150 mm long of extruded section and fixed complete all as specified.

S&F aluminium handles 150 mm long, cast type,anodised complete all as specified.

S&F aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, all as specified.

S&F framed work such as grills, gratings, etc. with end bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to e.290.Gde-E-165 including screwing and welding to existing wooden/steel windows complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe etc complete all as specified.

S & F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) including flush pipe 60 cm long complete all as specified and directed.

S&F 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia & PVC connection 15mm size, 450 mm long with PTMT nuts in repairs complete all as specified & directed by Engineer-in-Charge.

S&F in repairs for 15 mm bore bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule complete all as specified and directed.

S&F stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle fancy type, screwed both ends for iron pipe or for unions and fixed, chromium plated complete all as specified and directed.

S&F sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified.

S&F vitreous china wash hand basin with pedestal, white, flat back size 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair complete all as specified.

S&F central hole basin mixer Brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water for 15mm dia bore pipe in repair all as specified.

S&F wall mixer two-in- one brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water for OH shower fixed for 15mm dia bore pipe fixed in repair all as specified.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 mm long between flages complete all as specified and directed.

Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc.complete all as specified.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc. complete all as specified.

S&F 15mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches complete all as specified.

S&F 20mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches complete all as specified.

M&L cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 and and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall, all as specified.

S&F in repairs 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, any type, complete all as specified.

S&F in repairs 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc, including tank nipples, fittings, complete all as specified.

S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed (Minimum weight 20mm - 210 gms) etc complete all as specified.

S&F in renewal of 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe all as specified.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed.

S&F 125mm dia CP grating doom with/without waste hole (Minimum weight 40 gms) all as specified and directed.

Taking down pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc all as specified and directed.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint laid in trenches or in floors etc complete, all as specified and directed.

S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Bends with accesss door etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) Bends with accesss door etc complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single T) equal of unequal all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single T) equal of unequal all as specified and directed.

M&L for 125/110 mm PVC (SWR) trap setting and jointed with solvent cement complete all as specified.

M&L for 75 mm PVC (SWR) floor trap setting and jointed with solvent cement complete all as specified.

M&L granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform partion of wall and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade, including making full curving the edges and cutting to shape where ever required complete all as specified and directed.

M&L preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on new plastered surfaces of walls complete all as specified and as directed.

M&L complete removal of existing treatment on surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorosent salts , trading oil and greasy spots and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on plastered surfaces of walls preparatory to distempering complete all as specified and directed.

M&L preparation of new steel surfaces, not otherwise described over 10cm width or grith and applying two coat of synthetic enamel paint over a coat or red oxide primer complete all as specified and directed.

M&L preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint complete all as specified.

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified.

M&L preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying two coats of synthetic enamel paint as approved of any shade/ colour in camouflage pattern complate all as specified and directed.

M&L preparation of old surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorescent salts , trading oil and greasy spots and applying two coats of weather proof acrylic exterior emulsion paint as approved of any shade/ colour in camouflage pattern complate all as specified and directed.

M&L applying two coats of weather proof acrylic exterior emulsion paint as approved by GE of any shade/ colour in camouflage pattern over a coat of wall primer including preparation of newly plastered surfaces as per manufacture instructions complate all as specified and directed.

M&L for 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work on ceiling etc. complete all as specified.

M&L for 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in partition, wall panelling etc. all as specified.

S&F second class soft wood (kail) plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm complete all as specified and directed.

S&F 2nd class softwood (kail) weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified and directed.

-Ditto- all as per ser items No 106 here-in-before but except boarding, all as specified.

M&L hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, all as specified.

M&L 100 mm thick plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in flooring complete all as specified and as directed.

M&L for coloured non - skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed base 15mm screed bed in CM 1:4 and pointed in white or coloured cement to match complete all as specified.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. ,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick plastering with CM 1:4 complete all as specifed.

M&L for walling of random rubble stone masonry , brought upto courses well bonded, bedded and solidly hearted built in CM 1:4 complete, all as specified.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

S&F 2nd class soft wood (Kail) 40 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified.

M&L galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, all as specified.

S&F aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete, all as specified.

S&F 300 mm long mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed, all as specified.

S&F 300 mm long mild steel ordinary rat rail rod pattern springs including roller and roller plate complete, all as specified.

S&F 200 mm long mild steel barrel tower bolts, ISI marked stove enamelled block with bright bolt and fixed complete all as specified and directed.

S&F mild steel pressed handles, oval type ISI marked stove enamelled black complete all as 150mm size, all specified and directed.

S&F MS cold rolled butt hinges medium weight 75 mm long complete all as specified.

S&F 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings as directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolts, 75 mm long complete all as specified.

S&F of harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. complete, all as specified.

S&F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.

S&F vitreous china squatting pan "Orissa pattern" size 580x440 mm white with integral foot rest (exclding flushing cistern and flush pipe) including connection to trap, etcand to flushing pipe 90 mm long, anty syphonage pipe, etc, complete making good to floor, all as specified.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality, all as specified.

S&F in repair 15 mm bore Angular stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified

S&F in repair of bib tap chromium plated of 15 mm dia bore, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, all as specified.

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out soft and loose soil complete all as specified and directed.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm of loose and soft soil all as specified.

Removing excavated materials n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified.

M&L brick work with sub class 'B' burnt bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM 1:4 complete all as specified and directed.

M&L providing, precast cement concrete 1:2:4, type B1 (using 20 mm graged stone aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia, all as specified.

M&L cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm, all as specified.

M&L preparation of old surface including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of cement base paint on old plastered or un-plastered surface of walls all as specified.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, all as specified and directed.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface, all as specified.

M&L point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes 1.6 mm thick duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for One light/bell/Fan /Exhaust Fan point controlled by one switch, all as specified.

-Ditto- all as per Item No 143 but one switch socket combination 5 Amps on independent board

-Ditto- all as per Item No 143 but 2.5 Sqmm PVC insulated FRLS and unsheathed copper conductor for switch socket combination 3 pin 15 Amps on independent board with 2.5 Sqmm copper conductor cable as earth lead connected to common earth and dolly.

S&F switch piano flush type 5 Amps single pole one way, all as specified.

S&F switch socket combination box type multipurpose 2/3 pin suitable for 5 Amp plug top controlled by one switch complete, all as specified.

S&F switch socket outlet two in 1 3 Pin, 5 Amp, 230 Volts complete all as specified.

S&F switch socket combination multipurpose 5 pin,15 Amps box type complete all as specified.

S&F in repair Ceiling rose surface bakelite surface 65x50 mm 3 trminals fixed on wall/ceiling and including PVC block, complete all as specified.

S&F in repair LED bulb thread/pin type of capacity 10 Watt, complete all as specified.

S&F SMD LED panel recess/surface suspended mounting 36 watt 2' x 2' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ, all as specified.

S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size comlpete all as specified and directed by Engineer-in-Charge.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete, all as specified.

S&F in repairs lamp holder, PVC/ polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm, all as specified.

M&L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all and directed. Note: Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM

S&F in repairs MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.

S&F in repairs Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 6 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified.

S&F in repairs Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 32 Amp D/P and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, with two single core cables flat or circular 16 sq. mm 2 core, all as specified.

M&L in repairs for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion, all as specified. Note: The quoted rate is ilnclusive of necessary earth work, RFR and removal etc

S&F electric water heater, storage vertical type outer body Engineering Thermoplastic plastic with puf injected type insulation ,steel tank with glass lined coating inner tank and heating element (copper tube) upto 2 KW capacity 25 litre, 230 volts AC single phase BEE 5 Star rated complete with all accessories such as FR Grade 3 core PVC Cord ,multifunctional safety valve, thermostate, connection piece etc. complete all as specified.

Taking down or up 25mm bore unserviceable GI tubing including all fittings from the trenches etc. complete all as specified.

-Ditto all as per ser item No 164 above 40 mm bore size

-Ditto all as per ser item No 164 above 50 mm bore size

-Ditto all as per ser item No 164 above 80 mm bore size

-Ditto all as per ser item No 164 above 100 mm bore size

M&L for 100 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in trenches complete all as specified & directed.

M&L for 80 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,laid in trenches. complete all as specified & directed.

M&L for 50 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in trenches complete all as specified & directed.

M&L for 40 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laidin trenches. complete all as specified & directed.

M&L 25 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc. laid in trenches. complete all as specified & directed.

S&F for Gun metal globe or gate valve 20 mm bore size, non rising spindle heavy duty with iron wheel head, screwed both end for connection GI pipes (ISI Marked) including dismantling of unserviceable valve complete all as specified

-Ditto all as per ser item No 174 above but 25 mm bore size

-Ditto all as per ser item No 174 above but 50 mm bore size

S&F 100 mm bore cast iron sluice valve class PN 1.6 conforming to IS-14846, ISI marked with brass spindle complete with flanged ends including necessary nuts, bolts, washers and rubbers gaskets, 3mm thick heavy and iron wheel complete with jointing material including taking out old unserviceable sluice valve, all as specified.

S&F 80 mm bore cast iron sluice valve class PN 1.6 conforming to IS-14846, ISI, ISI marked with brass spindle complete with flanged ends including necessary nuts, bolts, washers and rubbers gaskets, 3mm thick heavy and iron wheel complete with jointing material including taking out old unserviceable sluice valve of 80 mm dia size, all as specified.

S&F non return valve of size 100 mm bore ISI marked including complete fitting item with jointing materials such as nuts, bolts, washers and rubber gasket etc of suitable size all as specified and directed.

-Ditto -all as per ser item No 179 but of size 80 mm dia.

S&F bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150 mm dia, all as specified.

M&L for construction of brick valve pit of size (0.9Mx0.9Mx1.5M) internal dimensions including all excavation and earth work in any type of soil and disposal of soil to a distance of not existing 50 mtr and depositing all as directed including 10 mm plastering internally in cement mortar 1:4, 100mm thick at with angle iron frame (25x25x3mm), mild steel black sheet plates plain channels of 4mm thickness including handle, locking arrangement will be provided including two coats of synthetic enamel paint over a coat of red oxide primer on sheet surface complete all as directed by Engr-in-Charge.

M&L for construction of brick valve pit of size (0.6Mx0.6Mx0.6M) internal dimensions including all excavation and earth work in any type of soil and disposal of soil to a distance of not existing 50 mtr and depositing all as directed including 10 mm plastering internally in cement mortar 1:4, 100mm thick at with angle iron frame (25x25x3mm), mild steel black sheet plates plain channels of 4mm thickness including handle, locking arrangement will be provided including two coats of synthetic enamel paint over a coat of red oxide primer on sheet surface complete all as directed by Engr-in-Charge.

M&L for cutting of existing road 3.75m and laying of 1:4:8 type D-2 PCC under 100 mm thick with 1:3:6 PCC including packing under hauching against the sides of pipe not exceeding 25 cm etc complete all as specified.

S&F lagging to pipes used in external RM in external water supply or plumbing all around 25 mm thick bended mineral weel preformed " SNAPON" pipe section of density 144 Kg/sqmm on confirming to IS-9042 of 25 mm dia provided with chicken mesh wire netting 25 gauge, 20mm mesh and with 0.01mm aluminium foil complete all as specified and directed by Engr-in-Charge.

S&F lagging to pipes used in external RM in external water supply or plumbing all around 25 mm thick bended mineral weel preformed " SNAPON" pipe section of density 144 Kg/sqmm on confirming to IS-9042 of 20 mm dia provided with chicken mesh wire netting 25 gauge, 20mm mesh and with 0.01mm aluminium foil.Complete all as specified and directed by Engr-in-Charge.

Disconnecting the defective/burnt electric induction motor & dismantling from the foundation, shifting to workshop for rewinding the electric induction motors suitable to run on 415V, AC, 50Hz supply with copper enameled copper wire of suitable gauge/size including proper insulation, warnishing, drying, greasing bearing, etc and making connection to the terminal plate complete for the motor 10HP to 30 HP of electric motor, all as specified.

Repair/ Maintenance of vertical type pressure fileters of capacity upto 3000 GLNS/Hr at water point and including removing the following materials and refixing & testing the same after rectification complete defects. (a) Dismantling/ Opening the filteration plant in let & out let alongwith connected pipe line, slucive valve, Butter fly valves of any size, Nut & bolts and other connected items completely. (b) Removal of complete any type of filter media from filteration plant and deposit old filter media where as directed by Engr-in-Charge (c) Removing of old/ un-serviceable Gun metal/ PVC nozzels from filtration plant complete and refixing with new PVC nozzles complete all as directed by Engr-in-Charge. (d) After removal of filter media and its conneted items drying the filteration plant internally & externally, Painting with two coat of red oxide and one coat of enamel paint inside and outside of filtration plant complete. (e) Repair/ maintenance of nozzle supporting plate inside the filter plant, scraping, cleaning the supporting plate before fixing of PVC Nozzel. (f) After drying of painting fixing nozzel supporting plate, fixing the PVC nozzels and filling the filter media in four layers as directed by Engr-in-Charge. (g) Laying the filter media with height of 30 CM in four layers first layer filled with Discard rock of size 12 mm dia, Second layer filled with 6mm thick drainge gravel, Third layer filled with 0.7mm seperating gravel and fourth layer filled with 0.7mm filteration sand complete all as directed by Engr-in-Charge. (h) After completion of filter media Laying fixing the in let & out let openings, fixing the existing in out pipe lines, slucive valves with necessary gaskets & nut, bolts and testing the filteration plant in presence of Engr-in-Charge. Note :- (i) Contractor should provide adequate safety eqpts for their men employed. (ii) Quotated rates are inclusive for welding work ,wirting sump capacity, date of cleaning month & year , Next due date of cleaning.

S&F MS flange suitable for 100 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts gasket 6 mm thick complete all as specified and directed.

S&F MS flange suitable for 80 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts gasket 6 mm thick complete all as specified and directed.

M&L in renewal pea gravel of size 12.5mm in layers not exceeding 15cm thick including cleaning and washing of filter media complete all as specified and as directed.

M&L in renewal pea gravel of size of size 20mm in layers not exceeding 15cm thick including cleaning and washing of filter media complete all as specified and as directed.

M&L in renewal pea gravel of size exceeding 1.5mm and not exceeding 4.75mm in layers not exceeding 15cm thick including cleaning and washing of filter media complete all as specified and as directed.

M&L for proving gravel of coarse sand of size not exceeding 1.18mm in layers not exceeding 15cm thick including cleaning and washing of filter media complete all as specified and as directed Note for Item No 191 to 194:- Pea gravel shall be free of organic impurities,the grains are smooth and rounded or sub-angular , It is made of hard, insoluble, siliceous material and uniform in size and quartz based with high silica content.

Cutting of existing GI pipe line of size upto 100 mm dia and inseting new pipe line including all fittings complete all as directed.

M/S RATHER CONSTRUCTION CO (BID ID -3446300)

m/s mohd saleem and co (BID ID -3440729)

M/S GURU DEV BUILDERS (BID ID -3440759)

M/S Tajamul Ah Buchh (BID ID -3441390)

ALCO Engineers Private Limited (BID ID -3441920)

VISHWA MITTAR PACHYALA (BID ID -3440839)

M/S MARVEL ELECTRICALS (BID ID -3441370)

K S BUILDERS (BID ID -3440800)