Repair of Seismic Vulnerability and Retrofit of Health and Life Line Building of Govt. Sr. Sec. School Bhagani, District Sirmour HP SH Providing E.I in Unit-7 of Govt. Sr. Sec. School at Bhagain.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3x1.5 Sq. mm

3 x 2.5 sq. Mm

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.

Armoured cable 16 sq. mm (Twin core)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

3 pin 5/6 A socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

S/E of LED Batten with aluminium extrusion housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.

Specification of LED fittings:-

Wattage of LED fittings :-As per following parameter.

Total lumens of the fittings. :-as below

Diffuser :-Polycarbonate diffuser/PMMA

Operating voltage :-140 V to 270 V, AC supply or better.

Input frequency :-50 Hz + 1 Hz

Power factor :-Minimum 0.90

Luminaire efficacy :->110 lm/w

Color rendering index:-CRI shall be greater than 80

Working/ operating temperature :-0ºC to + 45º C or better

Color temperature :-6000ºK + 10%

Electronic Driver :-

Drive current (LED):-As per OEM.

Operating voltage :-140 V to 270 V AC supply or better

Type of driver :-Constant current output driver

THD :-Less than 10%

Surge Protection :-2.5 KV minimum

Efficiency Driver:->85%

Protection:-Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver :-2 years against manufacturing defect.

Fixture :-Should comply with LM 79 test from UL/NABL lab.

LED Type/ Make/ Model:-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED:-50000 burning hours at 70% lumen maintenance

LED Batten Light 20W (2200 Lm)

S/E of LED bulk head IP 66 rated with aluminium body/PDC housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.

Specification of LED fittings:-

Wattage of LED fittings :-As per following parameter.

Total lumens of the fittings. :-as below

Diffuser :-Polycarbonate diffuser/PMMA

Operating voltage :-140 V to 270 V, AC supply or better.

Input frequency :-50 Hz + 1 Hz

Power factor :-Minimum 0.90

Luminaire efficacy :->80 lm/w

Color rendering index:-CRI shall be greater than 80

Working/ operating temperature :-0ºC to + 45º C or better

Color temperature :-6000ºK + 10%

Electronic Driver :-

Drive current (LED):-As per OEM.

Operating voltage :-140 V to 270 V AC supply or better

Type of driver :-Constant current output driver

THD :-Less than 10%

Surge Protection :-2 KV minimum

Efficiency Driver:->85%

Protection:-Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver :-2 years against manufacturing defect.

Fixture :-Should comply with LM 79 test from UL/NABL lab.

LED Type/ Make/ Model:-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED:-50000 burning hours at 70% lumen maintenance

LED Bulk Head 10 Watt ( 800 Lm)

Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.85, Air delivery minimum 215 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote/ BLDC electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Ceiling Fan 1200 mm sweep

Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Domestic type.

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

P/F openable sheet metal shutter suitable for exhaust fan size 300 mm as required complete in all respect.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way , Double door

16 way , Double door

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable

2 run of cable

Providing and fixing patch cord CAT 6e eatch with RJ 45 connectors at both ends complete as approved and directed by by the Engineer-in-Charge Approved Makes: D-Link, Digilink, Molex, Commrax

Supply Installation Testing & Commissioning of Cat6 UTP Information Outlet -Blue (Data). Should be PCB free and Tool less will be added advantage with halozn free. User Side. As per specification. Make : R&M/D-link/Molex.

SITC of UTP Face Plate (Single/dual) complete in all respect upto the entire satisfication of Engineer in charge.Make : R&M/D-link/Molex.

Supply,Erection testing & Commissioning of 9 U rack with cable manager,fan tray,power distribution kit complete in all respect.Make: HCL/ Comrack/ Wallrack/ Netrack

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(i) 25 MM

S/E of LED Street Light IP 66 rated with aluminium body/PDC housing.The job includes carriage, erection, making connections testing and commissioning of the fittings.The Specification of the Fittings is as under :-

Wattage of LED fittings :-As per following parameter.

Total lumens of the LED fittings

Body of fitting :-Pressure dia cast aluminium body with Extruded Aluminium heat sink

Input frequency :-50 Hz + 1 Hz

Operating voltage- 140 V to 270 V, AC supply or better.

Power factor :-Minimum 0.90

Luminaire efficacy :->110 lm/w

Color rendering index:-CRI shall be greater than 70

Working/ operating temperature :-00 to + 450c or better

Color temperature :-60000K to 65000K

Electronic Driver :-

Drive current (LED) :-As per OEM.

Operating voltage :-140 V to 270 V AC supply or better

Type of driver :-Constant current output driver

THD :-Less than 10%

Surge Protection :-(10 KV minimum External) ( 4 KV Internal)

Efficiency Driver:->85%

Protection:-Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver :-2 years against manufacturing defect.

Fixture :-Should comply with LM 79 test from UL/NABL lab.

LED Type/ Make/ Model:-Havells/Bajaj/Panasonic with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED:-50000 burning hours at 70% lumen maintenance

LED Street Light 45/50 Watt

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:-

32 mm dia. G.I. pipe, heavy class

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. in the existing trench,complete as required. .

Rates should be quoted for all heights including all leads and lifts for internal and external works for all floor levels.

Useful materials should be handed over to the Assistant Engineer Electrical Sub Division Nahan, otherwise credit for useful materials will be charged.

Sample of all the material to be used on work shall be got approved from the Engineer-in-charge in advance before actual use on work and any or all of the material which are available as per Indian standard in the market should confirm to bureau of indian standards.

It is certify that the tender is being called on emergentnature in exigency of Public insterest.