REPAIR / MAINTENANCE OF ROAD, PATHWAY, PAINTING AND

Amount

Demolition of cement concrete in ground floors and paving exc 15 cm thick (below or above ground level) unreinforced. complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provicded. complete all as specified and directed.

Dismantling of steel or wrought iron or mild steel, of any description not otherwise provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description in any position not otherwise specially provide for.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, in soft/loose soil

M&L for Cement concrete 1:3:6 type C2 using 40 mm agg. in foundations, filling and mass-concrete as in post holes.

M&L plain cement concrete type C1 (1:3:6) using 20 mm graded aggregate in surface channel/drain.

M & L for finishing cement concrete surface even and smooth without using extra cement. complete all as specified and directed.

M & L for 25 mm thick Cement concrete type B0 1:2:4 (12.5 mm graded aggregate) in levelling coarse of floors surface even and fair without using extra cement complete all as specified and directed.

M & L for 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M & L for cement concrete tiles 30cm x 30cm x 20mm thick, machine pressed set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and pigment etc., complete all as specified and directed. Make: Anjali Tiles/ Ultra Tiles Pvt Ltd/ Terra Firma/ Bansal/ Mehtab Tiles/ Nitco

M & L for pavement floor vitrified tiles of size 300x300x10mm thick (Endura tiles of Johnson or equivalent makes listed in List of Makes) set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment to match the colour of tiles in vertical surface complete all as specified and directed. Make: SOMANY/NITCO/KAJARIA/VARMORA

M & L Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in Sub-Floors, Sub-Bases, Floors and pavings, etc complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation

M & L for machine pressed precast concrete interlocking paver block of approved quality set & jointed in cement slurry and pointed in grey cement and no pigment to match confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. Make: Anjali Tiles/ Ultra Tiles Pvt Ltd/ Terra Firma/ Bansal/ Mehtab Tiles/ Nitco

S & F Mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railling; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Preparation of new untreated steel and iron surfaces of any description over 10 cm in girth or width not otherwise described and applying two coats of synthetic enamel paint over one coat Red oxide zinc chrome primer etc complete all as specified and as directed by Engr-in-Charge. Make: Shalimar Paints (Superlac)/ Asian (Apcolite)/ Berger (Luxol)/ Jenson & Nicholson Paints Ltd (Brolac)/ Nerolac (Impression)

S&F Mild steel TMT bars 10 mm dia and over cut to length and bent to shape as reqd, including cranking , bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed ) not less than 0.90 mm dia complete all as speified and directed .

M&L precast RCC 1:2:4 type B1 as in landings, cover slab,chajjas etc.and similar articles with plain faces set in CM 1:6

Providing and laying at or near ground level factory made kerb stone of 1:1:2 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

S & F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V) consisting of super bright LED completed as per manufactures instructions including taking down old ones etc. all as specified and directed incl taking out old unserviceable studs. complete all as specified and directed. (Make:3M / 7M / Dark Eye/ Cat Eye )

S & F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions including taking down old ones. complete all as specified and directed. (Make:3M / 7M / Dark Eye/ Cat Eye )

S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed (Make:3M / 7M / Dark Eye/ Cat Eye )

S & F in repair road safety poly carbonate convex mirror 100cm dia encased in ABS materials, orange colour for outdoor installation including 3.0 m long and 75mm dia MS pipe as stand, fixed to ABS frame with proper fixing arrangement (Stand painting with two coats of synthetic enamel paint over one coat of red oxide primer fixed on ground in PCC block of size 45cmx45cmx50cm of PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and including necessary excavation earth work and removal of soil to a distance n. exc. 50m complete all as directed. Make : (3M / 7M / Dark Eye/ Cat Eye)

S & F in repair speed bump of size 335mmx450mmx75mm in yellow and black colour made from sturdy plastic material including two highly reflective reflectors moulded in PAMA material welded with base plate through ultrasonic welding process including necessary fixing metallic bolts complete all as directed. Make : 3M / 7M / Dark Eye/ Cat Eye

Manufacturing, supplying and fixing in repair Retroreflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 withrequired colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. Make : 3M / 7M / Dark Eye/ Cat Eye

Manufacturing, supplying and fixing in repair retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S.message plate of required size, steel work to be painted with two or more coats of syntheticenamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge Make : 3M / 7M / Dark Eye/ Cat Eye

Manufacturing, supplying and fixing in repair retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Make : 3M / 7M / Dark Eye/ Cat Eye

M & L for preparation of old concrete surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel (Ordinary tint). complete all as specified and directed.

M & L for preparation of new concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel (Ordinary tint) over priming coat. complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. complete all as specified and directed. Make: Asian Apcomark/ STP/ Shalimar Paints Ltd/ Berger Paint Ltd/ Jenson & Nicholson Paints Ltd/

M & L for preparation of new or previously treated surfaces for painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, with adequate no of coats white or golden yellow., complete all as specified and directed by Engr-in-Charge. Make: Asian Apcomark/ STP/ Shalimar Paints Ltd/ Berger Paint Ltd/ Jenson & Nicholson Paints Ltd/

M & L for repairs to pot holes any depth, not exc 1.00 sqm each including sweeping free from dust and mud, or water , scoring in road , path ,etc cutting around edges to at least 40 mm in depth , making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal ) complete all as specified and directed.

M & L pre-mix bitumenous macadam Grading -2 laid /rolled and compacted to required gradient and camber consolidated thickness 75mm with 3.5 % of bitumen content by weight of total mixture paving bitumen of any penetration complete all as specified and directed.

M & L for preparation of surface prior to application of primer and applying evenly a priming/tack coat with bituminous primer at 05 kg per 10 sq metre etc. complete all as specified and directed.

M & L for preparing existing black top surfaces by brushing with wire brushing for removing caked/mud etc sweeping with broom and finally fanning the cleaned surface with gunny bags to remove all loose dust and applying evenly a priming/tack coat with bituminous primer (Paving bitumen VG-10) at 05 kg per 10 sq metre and laying bituminous premixed carpet, 40mm consolidated thickness,with 0.405 cu.m. of stone chippings mixed with 21.90 kg of binder, rolled and compacted to required camber and gradient with 8 to 10 tonne power roller to required camber and gradient complete all as specified and as directed.

M & L for liquid seal coat, applying evenly binder @ 9.8 kg per 10 sqm blinding with 6.3mm size stone chippings @ 0.09 cum per l0 sqm and rolled to a uniform smooth surface with 8 to 10 tonne power roller to required camber and gradient complete all as specified and as directed.

M & L for Excavating in trenches, n-exc 1.50m wide and n.exc 1.5m in depth, for foundation, etc n exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

M & L for Returning filling in rock, including spreading, levelling, watering & well ramming in layers n-exc 25cm

M & L for PCC 1:4:8 type D2 (40mm graded agg) as in fdn filling & mass concrete

S & F RCC Hume pipe 300mm dia class NP3 with collars laid on concrete base as in drain

S K ENTERPRISE

M/s B.Citymai Syiem

M/s Chandan Kumar Thakur

M/S RAGHU NATH SAH

madan enterprise

MAHINDER ELECTRICALS

kapoor and co