WELCOME MAINTENANCE TO OFFRS MD ACCN UNDER AGE B/R-I, GE RANCHI

Amount

Dismantling Asbestos cement 6mm thick (corruga ted, semi corrugated, etc.) sheets in roof coverings including ridge.

S & F, 6 mm thick asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts .

Fixing only 6 mm thick asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts.

Dismantling timber scantling 40 sqcm and over in section in any position as in unframed work .

M&L 2nd class hard wood clean swan in scantlings fixed.

M&L 2nd class hard wood wrought in scantlings fixed.

Dimantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings .

S&F prepainted galvalum alm zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering in ridges,hips, valley gutters,chajjas, drip and straight flashings , fixed with ‘L’ type or ‘J’ type or cranked hook bolts.

Dismantling of wall and ceiling board any thickness/description including cover fillet complete all as specified and as directed.

M & L for 4 mm thick Asbestos cement plain building boards, fixed to timber framework with screws

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre incl 2mm dia G.I. ( upto 1200 mm length ) adjusting level to Purlins/ Rafter.

M&L for 4mm thick non asbestos fibre cement building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping.

M&L in repairs 2nd class hard wood plain fillets, square, rectangular or triangular in section of sectional area exc 13 sqcm & n.exc 25 sq.cm wrought , secured with nails or brads,

Description all as per item No 14 above, but sectional area not exc 3 sq.cm

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site .

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site .

Taking down shutter area .exc 1 sqm but n exc 2 sqm each

S & F for 2nd class hard wood (SAL) plain solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fitted to chowkats .

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2004 complete all as specified and as directed.

S&F as in hold fasts; conforming to Fe -290 Gde E-165 complete.

Cutting holes in brickwalls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required not exc. half brick

S&F 2nd class hard wood 30 mm thick glazed & skelton shutter (any no of pannel) open rebated and prepared to receive glass, gauge etc with sush bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a).

M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping / frame to match.

S&F particle board core factory made solid PVC Moulded door shutter 28 to 30mm thick (stiles) with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back faces,and with particle Board Core supplying and fixing in frame at site as per specification and drawing.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2004) .

M/L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flate iron 25x 3mm handle in each leaf.

M/L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flat iron 25x 3mm handle in each leaf.

Dismantling wrought iron or mild steel work of any description not otherwise provided

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirmig to Fe-410-W (Gde-E-250) quality A

S & F 100 mm Butt hinges medium weight medium cold rolled mild steel .

S & F 100 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 .

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete.

S&F of 150 mm size aluminium handles cast type anodised.

S&F of 100 mm size aluminium handles cast type anodised.

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples .

S&F stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples .

Hacking out old broken glass any thickness, size, quality or description, from metal/wooden frame including punching or drilling out old glazing pins and removal of demolished material from site.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing pins/spring clips in square n exc. 0.5 sq. m in each pane

Description all as per item No 41 above,but figured glass pin headed type n.exc 0.50 sqm each complete.

S&F Harrision rails , mild steel of anodised alloy with fixing brackets, stops, rollers incl endcaps etc.

S&F floor door stopper 150 mm of brass body and tongue anodised with hard drawn steel spring fixed .

Description all as per item No 44 above, but fixed in repairs

Demolition of cement concrete (reinforcement) any description and positin not other wise specifically.

M & L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc.

Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or slopeing) rough finished complete.

M & L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to.

M & L Mild steel bars 6mm to 8mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to.

Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as speefied and directed by Engr-in-Charge.

M&L for half brick wall work with old size brick straight or curved on plan to any radius built in cement mortar 1:4 .

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc .

M&L for rendering 15 mm thick on fair faces of brick work / Concrete /stone surfaces in cement mortar (1:6) making finished even & smooth without using extra cement .

M&L for rendering 15 mm thick on fair faces of brick work / Concrete /stone surfaces in cement mortar (1:4) making finished even & smooth without using extra cement using WPC (WPC will be measured separately).

Supply only liquid waterproofing compound.

S&F 18 mm thick Rajshree Celuka ply or equivalent as approved of grade 1 quality with both side plain white or coloured fixed with stainless steel screwes, solvent cement /adhesive to fabricate kitchen cabinet sides , top and bottom, door, shelf inside the cabinet and drawer including ,drawer chanel, magnetic ballcatch & other all fittings complete all as per manufacturers instructions incl taking out old existing wooden cabinate.

S&F auto closing hinges 35mm of crank(KH-001) or 8 crank (KH-002) openable at 110 degree of make as approved.

S&F stainless steel handles of 100mm size complete all as specified.

Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses.

M&L, 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes .

M & L 10mm thick rendering plastering in Cement Mortar 1:4 on fair faces of brick work orconcrete surface to receive wall finishes.

M&L vitrified tiles of any colour/shade 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles .

All as per above item No 64 but on vertical surfaces.

M&L coloured/ printed non-skid joint free ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match .

Description all as per item No 66 above, but on vertical surfaces.

M&L for coloured glazed ceramic tiles in vertical surface 350x250x7mm/450x350xx7mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces

Demolition of stone slabs and tiles of any description or thickness in floors, aprons

M&L 18 to 20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required.

S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen with plug washers and waste incl cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160 mm.

S&F Glass shelf of size 500mmX125mm consisting sheet glass with CP brackets and CP frame Size 500mm long complete

Cutting chases, pinning in, in brick walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making not exc 10 cm girth.

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site.

S & F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Refixing old 15mm bore GI tubing medium grade galvanized with fitting fixed in new or old position .

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site .

S & F, 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors,.

Refixing old 20mm bore GI tubing medium grade galvanized with fitting fixed in new or old position .

Dismantling water tanks Capacity in Exc 250 & n exc 500 litres and removing to store

Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store

S & F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 500 litres hoisted and fixed in position all as specified in SSR Part I

S & F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I

S&F 20mm bore PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule.

S&F in repair 20mm bore PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule .

S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

Taking down eaves gutters and rainwater pipes (any sizee or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors

S&F, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in treches or in floors.

S&F PVC bends any radius 100 mm dia

S&F in repair PVC bends any radius 75 mm dia

S & F 75 mm bore size PVC (SWR) branch piece, single (single Y) equal or unequal

S & F 110 mm bore size PVC (SWR) branch piece, single (single Y) equal or unequal

S & F 75 mm bore size PVC (SWR) junction single, (Single T) equal or unequal

S & F 110 mm bore size PVC (SWR) junction single, (Single T) equal or unequal

S & F in repair vitreous china wash hand basin,counter sunk white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing.

S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor.

S&F in repair vitreous china pedastal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor.

S&F, in repair 10ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket .

S&F in repair, 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends.

S & F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.

S&F brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union .

S&F Chromium plated toilet paper holder with flap of standard size as approved by GE.

S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed by Engr-in-charge.

S&F 32mm flexible pipe for urinals and wash basin.

S&F 32 mm bore dia of dishcharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

S&F in repairs of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S & F in repair PVC cabinet looking mirror box type of size 355 x 455 mm all as directed by EIC.

S&F in repair Brass chromium plated tubular towel rail 20mm dia D Type, 60 cm long between flanges.

S&F in repair EWC sheet cover to match EWC complete.

S&F in repairs Health fauset (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified.

M&L in repairs of Cast iron Nahani trap , Diameter of outlet in 100 mm with grating including jointing to waste pipe fixed in cement concrete typee B1 (1:2:4).

S&F in repair stainless steel plate rack 1mm thick of size 750X600mm and depth 250 mm , fixed on wall surface as per manufacturer's instruction and making good the surfaces .

S & F 15 mm bore two way long body bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F CP soap tray fixed with rawl plugs complete.

S&F in repair brass chromium plated wall mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC.

S&F in repair brass chromium plated Basin mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 900mm.

M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper of approved colour and shade over one coat of putty complete.

M&L for preparation of new plasterd wall surfacesand applying two coat of oil bound distemper of approved colour and shade over one coat putty .

M&L for preparation of old decorated surfaces on walls and applying one coat of oil bound distemper of approved colour and shade by Engr-in-Charge/SE

Description all as per above item No 122, but two coats of oil bound distemeper.

Description all as per above item No 122, but as on celling.

M&L for preparation of new plasterd wall surfaces and applying two coat of cement based paint of approved colour and shade

M&L, for preparation of old decorated surfaces on walls brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and trading oil and greasy spot & applying one coat of cement base paint complete all as specified and as directed.

M&L, for preparation of old decorated surfaces on walls and applying one coat of white wash complete all as specified and as directed.

Description all as per ser No 127 above item but on ceiling.

M&L for preparation on new wooden surfaces of any description not otherwise described over 10 CM width or girth and applying two coat of synthetic enamel paint of approved colour and shade over pink primer.

M&L for preparation on new steel surfaces of any description not otherwise described over 10 CM width or girth and applying two coat of synthetic enamel paint of approved colour and shade over red oxide zinc chrome primer.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint of approved colour and shade

M&L for preparation of old painted steel or iron surfaces of any description not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint of approved colour and shade

M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness after complete removal of existing treatment on wall surfaces.

M&L for preparation of existing old wall/ ceiling surfaces and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work

S&F PVC door bottom weather strip door brush sweep seal .

S & F in repairs aluminium dicast body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete

S & F 110mm PVC (SWR) WC connector with lip ring

HYDROTEC (BID ID -3365404)

ashiyana electrical company (BID ID -3355824)

OXFORD ELECTRICAL ENGINEERING WORKS (BID ID -3365551)

Bihar traders (BID ID -3352097)

K K GUPTA (BID ID -3362710)

M/S MAHABIR SAHU DESIGN AND CONSTRUCTIONS (BID ID -3357376)