PROVISION OF ELECTRIC CHIMNEY AT OMQS AT AF STN CHIMNEY HILLS

Amount

M&L submain wiring /Circuit wiring with PVC insulated, single core, multi stranded, 1100 volts grade unsheathed copper conductor cable in and including PVC Conduit/Casing capping with accessories fixed on wall /ceiling with GI screws complete with 2x 2.5 Sqmm +1x 2.5Sqmm for earth continuity conductor all as directed.

Supply and installation of Electric Chimney Vertical/Slant Shape Fully Automatic with Auto clean Technology with Touch sensor & gesture control and speed adjustment control with Noise below 59 DB working on AC 230 Volts,50HZ of size 60 cm with suction capacity 1350 Cubic meter /Hr or above with filter less technology well finished with material type Black Finish with front glass all as per directed by engr in charge. Note:- (i) Make Faber HOOD BLISS FL SC AC BK 60 or equivalent in other Brands. (ii) Manufacturer warranty- Minimum 2 years on Product.

M&L for Making Hole of size 150/200/250mm dia and 450mm thick in Hard Stone wall or suitable size for fixing of electric chimney duct pipe and Making Good disturbed surface by plastering and painting complete all as per directed by engr in charge.

M&L PCC (1:2:4) Type B-1 using 20 mm graded aggregate for making surface good with finishing the exposed surface all as specified and directed at site.

S & F MCB distribution board SPN 2 way single door 240V etc.

S & F MCB SPN 6 to 32 Amps10 KA 240V 50HZ, ISI Marked .

S& F Modular type Switch socket combination 2 in l, 5 pin 6 Amps/ 16 Amps flush type with box all as specified and directed .

S&F Flexible Aluminium exhaust vent pipe of size 150/200 mm dia for electric chimney with all fittings including nut bolts and clamps incuding covering with aluminium self adhesive foil Tape etc all as specified and directed by Engr- in- Charge

S&F 6 inch or 150/200 mm dia stainless steel cowl cover fitted on the end of the aluminium vent pipe complete with all fittings clamps and not bolts etc as specified and directed by Eengr- in- Charge

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as directed.

M&L for 12mm thick (No of ply 7) Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws as in cabinets, shelves, kitchen cabinet and cup boards etc complete all as specified and directed by Engr-in-Charge.

M&L for Teak wood lipping 6mm thick fixed with nails to block board veneered particle board or block board complete all as specified and directed by Engr-in-Charge.

M&L for Prelaminated particle board 18/19mm thick, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cabinets, shelves, kitchen cabinet and cup boards etc complete all as specified and directed by Engr-in-Charge.

M&L for 18-20mm thick Granite (on any type) work (table rubbed and polished) in steps, jambs pillars, window cills, cooking platforms and like in over and including 20mm thick cement screed in CM 1:4 including pointing in white or coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing complete all as directed.

Rounding to edges of Granite stone slabs edge as in nosing, such as in steps, cooking platform, and other similar situations all as directed by Engineer-in-Charge

M&L for 30mm width of flap continuous (piano) hinges, mild steel bright finish or electro galvanised fixed to wooden complete all as specified and directed by Engr-in-Charge.

S&F Drawer/Shutter handles Stainless steel handles of size 100mm for kitchen cabinet all as specified and directed by Engr-in-Charge.

S&F Auto closing hinges 35mm of 'O' crank or 'B' crank openable 100 degree for kitchen cabinet shutters complete all as specified and directed by Engr-in-Charge.

M&L for pre cast cement concrete solid block masonry 1:3:6 type C-1(using 20mm aggregate)with solid block exc 10cm in width setting in CM 1:4 etc complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc incl raking out joints hacking for key scrubbng down with water complete all as directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth without using extra cement in internal surfaces complete all as specified and directed.

M&L for preparing new plaster surface apply two coat of oil bound distemper over a coat of wall care putty to obtained smoothness of wall surfaces over one coat of primer complete all as specified and directed.

M&L for complete remocal of plastered surface and apply two coat of oil bound distemper over a coat of wall care putty to obtained smoothness of wall surfaces over one coat of primer complete all as specified and directed.

M&L for preparing old plaster surface apply two coats of white wash ceiling surfaces complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 300x450x7mm/350x450x7mm thick over and incl 10mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

Demolition of reinforced cement concrete in ground floor and paving (reinforcement cut as required tto facilitate demoliton) complete all as specified and directed.

manoj builders and consultants (BID ID -3358877)

SREE VARU ELECTRICALS (BID ID -3359568)