REPAIR/REPLACEMENT OF E/M NATURE OF WORK AND INTERNAL ELECT WIRING INCLUDING FITTINGS AND FIXTURES AT VRC UNDER GE (SOUTH) DELHI CANTT 10

Amount

-BLANK-

S&F in replacement of switch piano flush type 6 Amps SP one way complete all as specified and directed by Engineer-in-Charge. (Make : GM/Kinjal/Plaza/Havells)

S&F in replacement of switch piano flush type 6 Amps SP 2-way complete all as specified and directed by Engineer-in-Charge. (Make : GM/Kinjal/Plaza/Havells)

S&F in replacement bell push, flush type 6 Amps complete all as specified and directed by Engineer-in-Charge. (Make : GM/Kinjal/Plaza/Havells)

S&F in replacement of socket outlet 6 Amps flush mounted piano type 5 pin multi purpose complete all as specified and directed by Engineer-in-Charge. (Make : GM/Kinjal/Plaza/Havells)

S&F in replacement of switch piano type 16 Amps SP one way complete all as specified and directed by Engineer-in-Charge. (Make : GM/Kinjal/Plaza/Havells)

S&F in replacement of socket outlet 2 in 1 (multipurpose) 6 pin 6 and 16 Amps flush mounted type complete all as specified and directed by Engineer-in-Charge. (Make : GM/Kinjal/Plaza/Havells)

S&F in replacement of lamp holder bakelite insulated body with back plate suitable for batten fitting complete all as specified and directed by Engineer-in-Charge. (Make : GM/Kinjal/Plaza/Havells)

S&F in replacement of electric bell (Buzzer) AC, 230 volts single phase complete all as specified and directed by Engineer-in-Charge. (Make : GM/Kinjal/Plaza/Havells)

S&F in replacement of bell Ding dong type 230 volts single phase complete all as specified and directed by Engineer-in-Charge. (Make : GM/Kinjal/Plaza/Havells)

S&F in replacement ceiling rose surface Bakelite 65x25 mm two to three terminals complete all as specified and directed by Engineer-in-Charge. (Make : GM/Kinjal/Plaza/Havells)

S&F in replacement of fan regulator electronic, steped type, Switch type, suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer-in-Charge. (Make : GM / Kinjal/Plaza/Havells)

S&F in replacement of fan condenser 2.5 Mfd complete all as specified and directed by Engineer-in-Charge.Make :- Epcos/Tibcon/Havells

S&F in replacement of fan condenser 3.15 Mfd complete all as specified and directed by Engineer-in-Charge. Make:- Epcos/Tibcon/Havells

S&F in replacement of fan condenser 4 Mfd complete all as specified and directed by Engineer-in-Charge. Make:- Epcos/Tibcon/Havells

S&F in replacement starter for 230/240V, 18/20/36/40/65/80W FTL & 18/36W FP-L (CFL) complete all as specified and directed by Engineer-in-Charge. Make:- Havells/Bajaj/CG/Philips

S&F in replacement of bipin holder suitable for 14/28Watts T5 or 18/36Watts T8 type suitable for any tube light fitting as per site requirement complete all as specified and directed by Engineer-in-Charge. (Make : Philips/Bajaj/Anchor/Cona/Havells).

S&F in replacement of 4 pin holder suitable for 36/18 Watts 4 pin type CFL fitting as per site requirement complete all as specified and directed by Engineer-in-Charge. (Make :Baja/Havells/Philips).

S&F in replacement CFL 36 watts 4 pin type 6500 K,in replacement complete complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/Philips/CG.

S&F LED Glass Bulb 12 Watt B-22 Cap, AC 230V, 50 Hz, suitable for Batten Holder/Bulk head/SK light fittings in replacement old unsv CFL any watt of complete all as specified and directed by Engineer-in-Charge. Make : Bajaj/Philips/Syska/Havells

S&F in replacement Comfortable wall light fitting for LED Bulb B-22 Cap complete all as specified and directed by Engineer-in-Charge. Make: Philips Model- Comet or equivalent model in Crompton Greaves/Bajaj/Halonix/Syska/C&S

S&F of Photon Ultra bright LED integrated batten polycarbonate tube light fitting with decorative end cap complete (single side connection) with very high efficacy suited for installation in replacement of old existing unserviceable T8 FTL 36 Watt tubelight fitting with G13 lamp holders to give glare free light of 20 Watt LED CRCA batten with decotative end cap complete all as specified and directed by Engineer-in-Charge. Cat Part No HLB-33-20-CW-IP Make : Halonix or equivalent Make in C&S/Syska/Bajaj/Philips/CG/Havells.

S&F LED Integrated Batten T5 10 watt - 2 Ft White, indoor decorative PVC extruded T5 LED battern -integrated type complete with including fliexble wire in replacement of old unserviceable existing 36 Watt tube light fitting with Cat Part No HLB-07-10-CW-IP complete all as specified and directed by Engineer-in-Charge. Make : Halonix or equivlent Make in Havells/Bajaj/Philips/CG/Syska/C&S.

S&F LED 5 Watt batten type fitting, indoor decorative aluminium extruded T-5 LED Battern-integrated type (1 Ft) complete in replacement of old unsv existing 11Watt CFL light fitting, Cat Part No HLB-07-05-CW-IP complete all as specified and directed by Engineer-in-Charge. Make : Halonix or equivalent make as : Havells/Bajaj/Philips/CG/Syska/C&S

S&F LED Building security light fitting 30W on existing bracket in replacement of old unsv existing security light fitting any type Cat Part No LTESSI45WLED of C&S complete all as specified and directed by Engineer-in-Charge. (Make :- Havells/CG/Bajaj/Phillips/Halonix/Syska).

S&F in replacement of PVC insulated flexible copper cable of size 0.75 Sqmm 2 Core complete all as specified and directed by Engineer-in-Charge. Make : Polycab/Havells/Finolex

S&F in replacement of PVC insulated FRLS single core with stranded copper cable of size 1.5 Sqmm single core for any type of wiring as per site requirement and directed in Red/Blue/Yellow&Black&green colour complete all as specified and directed by Engineer-in-Charge. Make : Polycab/Havells/Finolex

S&F in replacement of PVC insulated FRLS single core with stranded copper cable of size 2.5 Sqmm single core for any type of wiring as per site requirement and directed in green colour complete all as specified and directed by Engineer-in-Charge.Make : Polycab/Havells/Finolex

S&F in replacement PVC insulated FRLS single core with stranded copper cable of size 6 Sqmm single core for any type of wiring as per site requirement and directed in Red/Blue/Yellow&Black&green colour complete all as specified and directed by Engineer-in-Charge. Make : Polycab/Havells/Finolex

S&F in replacement 1 x 36/40W domestic use electronic ballast suitable for FTL fitting in ABS housing with lead in wires for easy connections for existing tube light fittings of 36/40 Watts complete all as specified and directed by Engineer-in-Charge. as per site requirements. (Ordering Code : LHBF02904025 of Havells or equivalent in Bajaj/Phillips).

Taking down of old unserviceable ceiling fan/exhaust fan dismantling of blades, transportation to work shop and carrying out rewinding, transportation to site, reinstallation and testing complete all as specified and directed by Engineer-in-Charge. Note : Rewinding shall be measured and paid under respective item of this Schedule.

M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required complete all as specified and directed by Engineer-in-Charge. Note : Gun metal bush, clamp, shaft, rod, bearing and painting of fan with good quality of synthetic enameled paint and including lathe machine work if necessary to making a uppper/lower sheet of fan will be measured under of this item only.

All same as per item No 32 above here in before but exhaust fan 230/300 mm sweep

S&F in replacement of 36 Watt, 4' tube rod T8 base G5 complete all as specified and directed by Engineer-in-Charge. Make:- Bajaj/Havells/Philips/Crompton/Bajaj

S&F in replacement MCB DB SPN 8 Way double door type,(IP 43 Protection) flush mounting with following MCBs (Make/Model of DB : Legrand Cat No. 607711 or equivalent model of ABB /Indoasian) complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCCB 3 Pole 415V, Adjustable type, 100/125 Amps with breaking capacity 16 KA all as directed of approved make complete all as specified and directed by Engineer-in-Charge. (Make : Legrand/ABB/Indoasian).

S&F in replacement for MCB SP 10 to 40 Amps 240 Volts, 10 KA, `C' curve, all as per site requirement complete all as specified and directed by Engineer-in-Charge. (Make : Legrand/ABB/Indoasian)

S&F in replacement for MCB SPN/DP 32/40/63 Amps, 240 Volts, 10 KA, `C' curve, all as per site requirement complete all as specified and directed by Engineer-in-Charge. (Make : Legrand/ABB/Indiasian)

S&F in replacement MCB TPN/ Isolator 4P from 63/100 Amps 415 volts, 'C' Series 10 KA as per site requirement complete all as specified and directed by Engineer-in-Charge. (Make : Legrand/ABB/Indoasian)

M&L 'in replacement' submain wiring PVC insulated FRLS single core with stranded copper cable of size 6 Sqmm in 2 runs and 4 Sqmm one run for earth drawing through existing PVC conduit 25 mm dia conduit complete all as specified and directed by Engineer-in-Charge. (Make of cable : Havells/Polycab/Finolex) Note:- Two runs of main cable and one run of earth cable all-toghter shall be considered as one length for payment purpose)

S&F distribution board triple pole and neutral 4 way for fixing MCCB 125 Amps as incommer and MCBs as out goings with metal door and IP 43 Protections and connecting,in replacement complete all as specified and directed by Engineer-in-Charge. Make : Legrand Cat Ref No:- 607790 or equivalent model in make ABB/Indoasian

M&L for earthing complete with GI earth plate electrode 600 x 600 x 6mm thick burried directly in ground in ground (earth pit plate kess than 2.5 mtrs below ground level) with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm upto & including 7.5m by means of bolts, nuts check nuts as shown in electrical plate No-03, connected to earth test point including necessary PCC 1:2:4 type B-1 CI pit cover and frame of angle iron 40x40x3mm GI pipe 15mm dia light grade with funnel and locking arrangement complete all as specified and directed by Engineer-in-Charge.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicate dsituation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed by Engineer-in-Charge. Note:- Earth continuity conductor shall be measured & paid beyond 7.5m.

Taking down carefully the old U/S Aluminium / Copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in and including concealed PVC conduit medium grade and sunk in new pressed steel terminal boxes of required size factory made and factory painted with stove enameled black paint with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer with all accessories including 1.5 Sqmm standard copper conductor PVC unsheathed cable earth and connected to earth dolly for the followings complete all as specified and directed by Engineer-in-Charge. (Make of cable : Polycab/Finolex/Havells) Note:- The rate is inclusive cutting /chasing and making good the disturbed surface with CM 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete.

One light /fan/Bell point controlled by one way switch

One light point controlled by two 2-way switch 230 volts.

One 3 pin socket outlet 5 Amps independent board

One 3 pin socket outlet 5 Amps point on same board

One 3 pin socket outlet, 15 Amps on independent board with cable 2.5 Sqmm for main current and 1.5 sqmm as earth wire as power point.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

M/s KUNDU CONSTRUCTION

Microsys Controls India

PRASAD ELECTRICALS

M/S.M.S.Devi.Const.Co