REPAIR/MAINTENANCE OF FOOTPATH, KERB STONE, INTERLOCKING SIDE ROADS, POT HOLE AND WEARING COURSE AT AF STN PALAM UNDER GE(AF) PALAM, DELHI CANTT-10

Amount

M&L for repair to pot holes any depth, nexc.1sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in road, paths etc. cutting around edges to at least 30mm in depth, making good by applying tack coat of VG-10 at 5 Kg per 10 Sqm, putting in premixed bituminous macadam using paving bitumen of grade VG-30, well rammed and Sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 Cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings)- depth of pot holes exc 30mm rolled with power road roller of 8 - 10 tonnes capacity complete all as specified and directed.

M&L for preparing existing black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust etc. complete all as specified and directed.

M&L for applying evenly a priming tack coat bituminous using paving bitumen of grade cationic bitumen emulsion of grade RS I conforming to IS 8887/ ASTM D2397 @ 5Kg/10 Sqm surfaces complete all as specified and directed.

M&L for bituminous premix semi-dense asphaltic concrete 30 mm consolidated thickness using paving bitumen of grade VG-30 with 5.5% binder content by weight of total mix, spread by means of self propelled mechanical spreaded paver, rolled and compacted to required camber and gradient by using mechanical power road roller 8 to 10 tonne capacity complete all as specified and directed.

M & L for premix bituminous macadam consolidated thickness 75mm or less using 4% binder content i.e. paving bitumen grade VG-30 by weight of total mix and aggregate mix in computerised hot mix plant, laid, rolled and compacted to required gradient and camber with the help of mechanical paver and power 8 to 10 tonne capacity complete all as specified and directed.

M&L for Preparation of New and Old untreated surface to receive the thermoplastic paint and making of guide line, dash arrows, letter etc. with reflective thermoplastic paint 2.00 mm to 2.50 mm thick, white golden, yellow or black colour as required using glass beads necessary for achieving reflection on road , pavement and the like of any description and in any width complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base etc. complete all as specified and directed.

M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658 (latest revised) of 80 mm thickness, M-40 Grade complete all as specified and directed.

M&L PCC 1:2:4 type B1 (20mm aggregate) as in kerbs/ stops, rounded or chamfered on edges of the interlocking tiles in berms complete all as specified and directed.

M&L for factory made precast cement concrete kerb stone of PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) of approved shape and size of 0.45m x 0.30m x 0.15m including chamfered angles, weathering of singly round throating etc including setting and jointing in cement mortar 1:4, including necessary formwork complete all as specified and directed.

M&L for 75mm thick factory made precast cement concrete saucer drain of approved shape and size of 0.45m x 0.30 x 0.075m (or size may vary as directed by Engr-in-Charge) in PCC1:2:4 with rounded edge fixed in position and pointed in cement mortar 1:4 and finishing exposed surface even and smooth complete all as specified and directed Note: Cost towards formwork shall be deemed to be included in quoted rates , if required.

M&L for applying two coat of synthetic enamel paint on concrete surfaces of any description over 10cm girth or width over a coat of primer including necessary preparation, complete all as specified and directed.

S&F in repair Orange Delineator polyurethane material spring post (regular) height 710mm,base dia 210mm,pole dia 80mm with highly reflective heat transfer sheet pasted on specially designed grooves , Model No Dark Eye DA 954 or equivalent, complete all as specified and directed.

S&F in repair for heavy duty epoxy filled LED solar road studs aluminium alloy shell, size 125x125x25mm, protection class IP65 complete all as specified and directed.

S&F high quality plastic speed breaker, H2 safety H2PB50-1 or equivalent, 500x400x50mm, weight 4 Kg/RM ,Black & yellow colour combination, complete all as specified and directed.

S&Fin repair ABS engineering plastic road Cat's eye (road studs), dynamically designed having high impact reflectors on both sides size 110X128x30 mm, weight 248gms and fixing with epoxy on road complete all as specified and directed. Make Dark Eye Model No DA-971-P / 3M or Model as equivalent to Dark Eye.

M/S Satyam Associates

Arihant Enterprises