REPAIR TO TILING FLOORING PLASTERING AND OTHER MISCELLANEOUS BR WORKS IN JCO ORs MD ACCN AT BANA SINGH ENCLAVE AND 180 OR MAHIPALPUR UNDER AGE BRII SOUTH OF GE SOUTH DELHI CANTT 10

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-charge.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engineer-in-charge.

M&L for joint free glazed ceramic coloured tiles in vertical surface 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed by Engineer-in-charge.

M&L for screed bed or bedding layer 15 mm thick for laying floor finishes in cement mortar 1:6, complete all as specified and directed by Engineer-in-charge.

M&L for backing coat/ plaster 10 mm thick on fair faces of brick work in cement mortar 1:4 surfaces to receive tiles, complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing and connections including cleaning for re-fixing, 15 mm bore of pipe, complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing and connections including cleaning for re-fixing, 20 mm bore of pipe, complete all as specified and directed by Engineer-in-charge.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings (such as bends, elbows, tee, short pieces, connector, cap, plug and union etc) and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed by Engineer-in-charge.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings (such as bends, elbows, tee, short pieces, connector, cap, plug and union etc) and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed by Engineer-in-charge.

Cutting chases or making holes, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth, complete all as specified and directed by Engineer-in-charge.

S&F in repairs PVC connections 450mm long with brass unions at both ends suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-charge.

S&F in repair 15 mm bore Angle valve/Stop valves, cast copper alloy , chromium palted, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union, complete all as specified and directed by Engineer-in-charge.

S&F in repairs bib tap, brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore, complete all as specified and directed by Engineer-in-charge.

S&F in repairs CP brass fancy type mixing valve 15 mm bore including joints to steel pipe or unions for centre hole wash hand basin, with fittings, complete all as specified and directed by Engineer-in-charge.

S&F in repairs chromium plated grating 100mm dia of ISI marked includingh fixing with 1:4 CM in floor/ nahni trap etc., complete all as specified and directed by Engineer-in-charge.

S&F in repairs grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gms) complete all as specified and directed by Engineer-in-charge.

S&F in repairs brass chromium plated overhead shower rose 125mm dia, with revolving joint and shower rod fixed to 15mm bore pipe, complete all as specified and directed by engineer-in-charge.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, 'D' type 60cm long between flanges complete all as specified and directed by Engineer-in-charge.

S&F in repairs brass chromium plated health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) , white including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device, complete all as specified and directed by Engineer-in-charge.

S&F in repair, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level cisterns complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china wash basin, white, flat back of size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed by Engineer-in-charge.

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces of ceiling, chajja,etc finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of wall and applying wall care putty on whole surfaces including grinding with sand paper and levelling of surface and applying two coat of oil bound distemper on white or tinted over existing prepared putty base surface, complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plasered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed by Engineer-in-charge.

Taking down chowkats with shutters not exceeding 2.00 Sqm each (without taking off shutters from the frames), complete all as specified and directed by Engineer-in-charge.

S&F factory made solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with 19 mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, complete all as specified and directed by Engineer-in-charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing frame at the site as per specification & drawing complete all as specified and directed by Engineer-in-charge.

S&F stainless steel butt hinges, size 100 mm ISI marked complete, complete all as specified and directed by Engineer-in-charge.

S&F aluminium anodised barrel tower bolts, 150 mm ISI marked long of extruded section and fixed, complete all as specified and directed by Engineer-in-charge.

S&F aluminium handles, ISI marked 150 mm size, fabricated type, complete all as specified and directed by Engineer-in-charge.

Demolition of reinforcement cement concrete of any discription and in any position, including cutting of reinforcement from adjoining RCC component to faciliate demolition, complete all as specified and directed by Engineer-in-charge.

M&L for RCC 1:2:4 type B-I using 20 mm graded stone aggregate (Nominal Mix) as in slabs, supported on walls, landings, balconies, shelves including scaffolding and other T&P complete all as specified and directed by Engineer-in-charge.

M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping of columns, hooking ends and binding with and including muld seel wire (annealed) not less than 0.9mm dia, complete all as specified and directed by Engineer-in-Charge.

All same as per Ser Item No. 37 above but here-in-before 5mm dia and over upto and including 10mm dia in stirrups.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing & similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces, complete all as specified and directed by Engineer-in-charge.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed by Engineer-in-charge.

S&F 100 mm dia cast iron (sand cast ) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed by Engineer-in-charge.

S&F 75 mm dia cast iron (sand cast ) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed by Engineer-in-charge.

M&L for 75mm dia cast iron bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed by Engineer-in-charge.

M&L for 100mm dia cast iron bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed by Engineer-in-charge.

S&F in repairs for cast iron floor trap 100mm, with grating including jointing to waste pipe fixed in cement concrete typeB-1 (1:2:4) 12.5 mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for cast iron floor trap 75mm, with grating including jointing to waste pipe fixed in cement concrete typeB-1 (1:2:4) 12.5 mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

P R Constructions

M/S.M.S.Devi.Const.Co

Ish Engineers and Contractors

CHANDERA BUILDERS