Kaliakkaviali Town Panchayat MLA FUND 2023-24

Amount

Supplying and fixing in position of vertical column arrangements with 80 mm Ø size GI pipe and base plate of size 30 x 30 x 10 mm and bed plate of size 30 x 30 x 12 mm and with support of 50 x 50 x 6 mm size angle are provided at base and bed plates to GI pies and drilling holes in the MS angles if necessary to accommodate the bolts, including one coat of red oxide primer etc. complete complying with standard specification and as directed by the departmental officers. 100 mm GI pipe

150 mm GI pipe

Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Cement concrete of mix 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using 20 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification.

Supplying and fixing of trusses using necessary "L" angles and 'I' sections each according design approved by the departmental officers including cutting, welding, cost and conveyance of all materials to work site and all labour charges etc as per standard specifications.

Supplying and fixing of roofing with galvaline Sheet 0.47 mm thick of approved quality by drilling hole (and not by punching) with necessary J/U bold and nut of 8 mm Ø of suitable length providing one set of bitumen washer at 25 mm Ø and 1.60 mm thick for each bold and nut including protruding portion of bold and nut shall be covered with bitumen compound etc complete complying with standard specification and as directed by Engineer incharge. TNBP NO.49.

Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complete complying with standard specification. (The make, quality and colour of paint should be got approved by the departmental officers before use on works.)

G.JAYARAJ