SITC of Protection Panels with allied items for HVAC System at IPD Block at SKIMS MCH Bemina

Fabrication, supply, installation testing & commissioning of compartmentalized, outdoor-type, Electrical Panel of cubical construction, having 6 Nos. Angle-iron legs of suitable dimensions, to be sufficiently grouted (> 750mm depth), in 1:2:4 concrete mix, onto outdoor land / concrete as per site requirement, fabricated out of 2mm thick sheet steel, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated, cable alley, inter-connection with suitable size solid Aluminium strip, having switchgears and accessories, mountings and internal wiring, earth terminals and earthing, numbering etc. complete in all respects with following Incoming / Outgoing / accessories, suitable for operation on 415V, 3 phase, 50Hz, AC Supply with enclosure protection class IP42 as required alongwith Digital VIF Meters including CT Coils of requisite Ratio / Selector Switches / LED Indications / locking arrangement etc. as per the drawing approved by the Engineer in Charge: (i) 1600A, 4Pole, ACB, 50kA, O/L, S/C & E/F, Microprocessor Based, Electronic / Microprocessor Tripping Type, Electrical Draw-Out type : 1 Nos. (ii) 2000A, TPN, Aluminium Busbar: 1 Set

Fabrication, supply, installation testing & commissioning of compartmentalized, outdoor-type, Electrical Panel of cubical construction, having 6 Nos. Angle-iron legs of suitable dimensions, to be sufficiently grouted (> 750mm depth), in 1:2:4 concrete mix, onto outdoor land / concrete as per site requirement, fabricated out of 2mm thick sheet steel, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated, cable alley, inter-connection with suitable size solid Aluminium strip, having switchgears and accessories, mountings and internal wiring, earth terminals and earthing, numbering etc. complete in all respects with following Incoming / Outgoing / accessories, suitable for operation on 415V, 3 phase, 50Hz, AC Supply with enclosure protection class IP42 as required alongwith Digital VIF Meters including CT Coils of requisite Ratio / Selector Switches / LED Indications / locking arrangement etc. as per the drawing approved by the Engineer in Charge: Incoming: (i) 2000A, TPN, Aluminium Busbar: 1 Set Outgoing: (i) 800A, 35-36kA, 4P, Thermal and Magnetic adjustable, MCCB: 3 Nos (ii) 63A, 35-36kA, TPN, MCBs: 5 Nos (Schneider / ABB / LK / Siemens)

Supply, testing, laying, connecting & commissioning of 630 sq. mm, 1.1kV grade, Single-core, Aluminium Conductor, XLPE Sheathed Armoured Cable (ISI Marked), including PVC tagging after every 5 metres. The Job includes providing and fixing of MS Clamps (for fixing of cables onto wall or as per instructions of the site engineer). The Job includes end-termination of spans of the cable at locations as per the instructions of the site engineer. The Cable is to be laid in spans of lengths as per the instructions of site engineer. (Havells / KEI / Polycab)

Supply, testing, laying, connecting & commissioning of 120 sq. mm, 1.1kV grade, 3.5-core, Aluminium Conductor, XLPE Sheathed Armoured Cable (ISI Marked), including PVC tagging after every 5 metres. The Job includes providing and fixing of MS Clamps (for fixing of cables onto wall or as per instructions of the site engineer). The Job includes end-termination of spans of the cable at locations as per the instructions of the site engineer. (Havells / KEI / Polycab)

Supplying and laying 25 mm × 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part ll complete with fitting and cutting, jointing etc.direct in ground (>450 mm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc.,complete as required.

300 mm dia (OD-300 mm & ID-255 mm nominal)

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size),complete as per standard design including. excavation, reinforcement, shuttering, finishing and all allied items required for complete job including making the site good after completion of work as directed by engineer in charge Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (Medium /Heavy duty) as per requirement at site.

Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25×3 mm

Making road cut in turfed footpath/earthen berm for laying of utility services, including removal of turf, excavation up to 1.0 m depth, upto 1.2m width, refilling with excavated earth in layers, compaction, dressing, and restoration of surface to original condition, complete, excluding the cost of pipes but including labour, carriage, and clearance of site and all incidental charges complete.