Internal Electrification for Service/ Laundry Block at District Hospital Anantnag

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS steel insulated copper conductor single core cable in Existing surface / recessed medium class steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS steel insulated copper conductor single core cable etc. as required.

Supplying and fixing of following sizes of medium class steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Wiring for Light /Power Plug with 2 x 4 sq.mm FRLS steel Insulated Copper Conductor single core cable in Existing surface/Recessed medium class steel Conduit along with 1 No. 4 sq.mm FRLS steel Insulated copper conductor single core cable for loop earthing as required.

Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSsteel insulated copper conductor,single core Cable in Existing surface/Recessed medium class steel conduit as required.

2 X 2.5 SQ.MM + 1 X 2.5 SQ.MM EARTH WIRE

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

3x4 sq mm + 1x4 sqmm earth wire. Excluding conduit

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection,painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing of 20 Ampere,415 V TPN Industrial Sype socket outlet, with four pole and earth metal enclosed plug top alongwith 20 ampere,C curve TP MCB in sheet steel enclosure,on surface or in recess, with chained metal cover for the socket.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'C' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Double Pole

Triple pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

150 A, 16 KA,TPMCCB

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

12 way (4 + 36), Double door

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

SITC of Wall Fan, suitable for low voltage operation including wiring with 1.5 sq.mm FR steel insulated,copper conductor,single core cable etc as Required.

450 MM SWEEP

Supply of pre-wired Surface Mounted 4Ft 20 or close to 20 watts LED commerical Fitting with ,Driver Etc. including connections with 1.5 sq.mm FR steel insulated copper conductor single core cable and earthing etc as required .

Supply of pre-wired Surface Mounted LED Ceiling Light 12 W including connections with 1.5 sq.mm FR steel insulated copper conductor single core cable and earthing etc as required

Supply of pre-wired Surface Mounted LED Flood Light 50 W including connections with 1.5 sq.mm FR steel insulated copper conductor single core cable and earthing etc as required

Installation of light fixture on ceiling/walls

Supply of AC 230/250 Volts, 50 Hz exhaust fan with louveres of Following Sizes including connection etc. complete as required .

Supplying of 1 No. steel /XLPE insulated and steel Sheathed /XLPE Power Cable of 1.1 KV Grade of Following Sizes in the existing RCC/ Hume/ DWC/ Stone ware/Metal Pipe/ Cable Tray as Required.

3.5C x 300 mm² LT XLPE (A2XFY) insulated Aluminium conductor steel outer sheathed Armoured cable.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of steel insulated and steel sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5C x 300 mm² LT XLPE (A2XFY) insulated Aluminium conductor steel outer sheathed Armoured cable.

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

150 mm width X 50 mm depth X 1.6 mm thickness

Design,fabrication,assembly,testing and commissioning of floor mounted, free standing, totally enclosed, indoor, cubicle, extendible compartmentalized, front operational, vertical, pest and vermin proof, Main LT panels/main distribution boards manufactured from 16SWG tolerence of (+/- 15%) thick CRCA sheet steel frame work and 1.6mm thick covers with hinged detachable, locable, front and back open able dual compartmentalized individual chamber door. thick gland plates having gone through seven tank process of finishing, powder coated in required shade. (1 SET OF BUS) The bus bar shall be aluminum with DMC supports. The equipments shall be of the makes as called for in list of makes, other accessories like lift hooks, cable alleys, base, compartmentalization etc shall be as per design approved, earth bus of respective materials shall be provided as standard feature.

5x4x1=20cft

CTs300/5A ratio -1 set.

a).0-200A, Ammeter, ASS and

b).0-500V, Voltmeter,

c).Phase indicating lights with fuses in RYB colour

Incoming

250 amps TPN 36 KA MCCB.

outgoing

150 amps TP 16 KA MCCB.

63 amps DP MCB

63 Amps TPN MCB

Design,fabrication,assembly,testing and commissioning of floor mounted, free standing, totally enclosed, indoor, cubicle, extendible compartmentalized, front operational, vertical, pest and vermin proof, Main LT panels/main distribution boards manufactured from 16SWG mm thick CRCA sheet steel frame work and 1.6mm thick covers with hinged detachable, locable, front and back open able dual compartmentalized individual chamber door.3mm thick gland plates having gone through seven tank process of finishing, powder coated in required shade. (1 SET OF BUSBAR of 800 amps) The bus bar shall be aluminum with DMC supports. The equipments shall be of the makes as called for in list of makes, other accessories like lift hooks, cable alleys, base, compartmentalization etc shall be as per design approved, earth bus of respective materials shall be provided as standard feature. ( double door out door type)

2x2.5x1=5 cft

MS Stand for above panel 32mmx6mm 2 feet above ground level.

Incoming

1 No. of 250 amps TPN 36 KA MCCB.

outgoing

250 amps TPN 36 KA MCCB.

Phase indicating lights with fuses in RYB colour -1set.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required.

Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

Abdullah Electric Company