AGMC of sub-station panles, internal electrification work, electrical and associated systems including operation of DG sets, water pumps and Lifts

Amount

SCHEDULE: A : CSIR HQ AND SCIENCE CENTRE

Sub-Head: I :- Operation, Preventive and Routine Maintenance of Electrical Systems.

Operation and Maintenance of entire Electrical Installation including distribution boards, LT panels, operation of various DG sets, waterpumps and Lifts at CSIR Hq and CSIR Vigyan Kendra, New Delhi. The scope of work including the deployment of manpower is as per annexure -I

Schedule: B: CSIR complex and Guest House

Sub-Head: I :- Operation, Preventive and Routine Maintenance of Electrical Systems.

Operation and Maintenance (Routine/ Preventive/breakdown) of entire Electrical Installation including Distribution boards, LT panels, operation of various DG sets, substation, waterpumps, lifts and Comprehensive Maintenance of 300 KVAR capacitor bank at CSIR Complex, New Delhi. The scope of work including the deployment of manpower is as per Annexure -I

Schedule C :- Naraina

Sub-Head: I :- Operation, Preventive and Routine Maintenance of Electrical Systems.

Operation and Maintenance (Routine/ Preventive/breakdown) of entire Electrical Installation including distribution boards, LT panels, operation of various DG sets, substation, waterpumps and Comprehensive Maintenance of 200 KVAR capacitor bank at CSIR Naraina Complex, New Delhi. The scope of work including the deployment of manpower is as per Annexure -I

Schedule D :- MBSA and IPU at NISCAIR

Sub-Head- I :- Operation, Preventive and Routine Maintenance of Electrical Systems.

Operation and Maintenance (Routine/ Preventive/breakdown) of entire Electrical Installation including distribution boards, LT panels, operation of various DG sets, waterpumps, lifts and Comprehensive Maintenance of 100 KVAR capacitor bank at CSIR MBSA, New Delhi and IPU at NISCAIR, satsang Vihar, New Delhi. The scope of work including the deployment of manpower is as per Annexure -I

Sub-Head: II :- Replacement of Electrical Components & Accessories.

Replacement of Defective of following rating and breaking capacity and pole MCCB including supply with thermomagnetic Relaase and terminal spreaders in exiting cubicle panel board drilling connections etc as required.

100 A, 16 KA TP MCCB

125 A, 16KA TPMCCB

200 A, 25KA TPMCCB

125 A, 36 KA FPMCCB

200 A, 36 KA 4 pole MCCB

630 A, 50 KA 4 pole MCCB

Replacement of defective 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker including supply suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Triple pole

Triple pole and neutral

Replacement of defective 63 amps rating, 240/415 volt "C" series, miniature circuit breaker including supplysuitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing & commissioning etc. as required.

Single pole and neutral

Triple pole and neutral

Replacement of defective Fan regulator on existing switch box cover including supply and connections etc complete in all respect. Switch type fan regulator of "Anchor" / "Rider make 100 Watt 230 volts

Replacement of defective DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB including supply complete with connections, testing and commissioning etc. as required.

Replacement of defective heavy duty exhaust fan of 300 mm sweep, single phase, 900/1400 RPM complete with all accessories including supply, connections etc complete in all respect.

Replacement of defective starter in the existing Flourescent tube 18/36 watt including supplying etc complete in all respect.

Replacement of defective capacitor 2.5 Mfd, 230 V A.C. including supply in the existing fitting / fans etc complete in all respect.

Replacement of defective Plug Top including supply, connections etc. as required.

3 pin Top 6 Amp

3 pin Top 16 Amp

Replacement of defective flexible 3 core 2.5 sq.mm. copper PVC insulated unarmoured round cable 1.1 KV grade including supply, connection etc as required.

Replacement of defective gang box on surface or in recess with 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch, including supply , connections etc. complete as required.

Replacement of defective gang box on surface or in recess with 5 pin 15/16 amp socket outlet and 15/16 amps. piano type switch, including supply, connections etc. complete as required.

Replacement of defective gang box on surface or in recess with 2 numbers 5 pin 5/6 amp socket outlet and 2 numbers 5/6 amps piano type switch, including supply,connections etc. complete as required.

Replacement of defective 9 watt LED bulbs , 230V, AC, including supply etc as req.

Replacement of defective piano type socket fan regulator etc complete as required.

Replacement of defective Remote Bell including supply and connection etc as req. "Cona" Make

Replacement of defective 400 mm sweep swing pedestal fan including supply, making connections and accessories complete as required.

Replacement of defective Ceiling fan with 1200 mm sweep blades, high speed including supply making connections and accessories etc. complete as required.

Replacement of defective wall mounting fan with regulator of 400 mm sweep with oscilation on wall / wood with the help of rawl plug and screws including supply and connections etc complete in all respect.

S / I / T/ C of 1 HP / 0.75 KW, Single Phase Sewage Submersible Pump, 250V, 50Hz, speed 2900 rpm, Make - Crompton / Kirloskar with autometic float switch, outgoing & incomming pipe connection etc complete as reqd.

Supplying, installation, testing and commissioning of Bright Line 20 Watt LED Batten ( Cool Day Light ) 240 V, Fitting (Philips) OR Garnet 22W LED Batten (Wipro) lighting fitting on surface / recesses complete with all acessories i.e. Lamp / driver etc complete in all respect.

Replacement of defective hylum sheet 3 mm thick inluding supply in the existing switch / socket MS box etc complete in all respect.

Replacement of defective flexible 3 core X 4.0 Sq.mm. copper PVC insulated unarmoured round cable 1.1 KV grade including supply,connection etc as required.

Replacrment of 32 A, 240V (white) D.P. Main Switch Operating with Key Tag 2 Make - ROMA including supply and connection etc complete as required

Supplying and fixing 8 module plastic box horizental with modular plate and cover on surface or in recess, including providing and fixing 1 number 6 amp modular switch, 3 number 6 amp modular Socket and 1 number blank plate including connections etc as required.

Providing and fixing following size of PVC casing and caping on surface as required.

(a) 25mm x16mm

(b) 38mm x16mm

Illumination of Building on rental Basis for foundation day with suitable LED lights for decoration of the campus for two days including man power, material, transportation etc. complete as required at CSIR HQ New Delhi. (a) Providing and fixing weather proof LED lighting on terrace with a parapet length of 70 mts and in vertical lines of 15 meters drop at every interval of 0.25 m. (b) Illuminating the porch area of the building in vertical lines of 5.0 m dropat every interval of 0.25 mts. (c) Illuminating the Boundary wall of 60 mts length and 2 nos. gates including security room area. (d) Illumination of 25 nos. trees and plants, fountain area in lawn as per the instruction of Engineer-In- charge .

Illumination of Building on rental Basis for foundation day with suitable LED lights for decoration of the campus for two days including man power, material, transportation etc. complete as required at CSIR Complex, Pusa, New Delhi. (a) Providing and fixing weather proof LED lighting on terrace with a parapet length of 57.5 Mtr and in vertical lines of 28 Mtr drop at every interval of 0.25 Mtr. (b)Providing and fixing weather proof LED lighting on terrace with a parapet length of 33.5 Mtr and in vertical lines of 3 Mtr drop at every interval of 0.25 Mtr (c)Providing and fixing weather proof LED lighting on terrace with a parapet length of 13 Mtr and in vertical lines of 10 Mtr drop at every interval of 0.25 Mtr,Illuminating of 2 nos. gates including security room area as per the instruction of Engineer-In- charge.

Filtration & dehydration of Outdoor Type 11/0.433 KV, 3 phase, Dyn 11 500 KVA Transformer Oil with streamlined filter machine, attending the leakaging points, replacement of packing gaskets, bushings rods, Silica Gel including Supply & top up with new transformer oil with low viscosity EHV grade in the main transformer tank upto the required level, disconnection & re-connection of HT & LT cables and painting with synthetic enamel paint (two or more coat) with spray machine with existing colour matching paint including scrapping, rubbing of old paint with sand paper apply deco putty (where required) on the surface etc complete as required.(CSIR-Naraina)

Filtration & dehydration of Indoor Type 11/0.433 KV, 3 phase, Dyn 11 630 KVA Transformer Oil with streamlined filter machine, attending the leakaging points, replacement of packing gaskets, bushings rods, Silica Gel including Supply & top up with new transformer oil with low viscosity EHV grade in the main transformer tank upto the required level, disconnection & re-connection of HT & LT cables and painting with synthetic enamel paint (two or more coat) with spray machine with existing colour matching paint including scrapping, rubbing of old paint with sand paper apply deco putty (where required) on the surface etc complete as required. (CSIR-CX)

Supplying, installation, testing and commissioning of 100 Watt LED flood light for existing solar tree with different colours, IP: 65, 230 V, 50 Hz etc complete as required.

Supplying, installation, testing and commissioning of 150 Watt LED flood light for existing solar tree with different colours, IP: 65, 230 V, 50 Hz etc complete as required.

Supplying and fixing of 9 watt LED bulb 230V, AC, 50 Hz, including PVC Batten holder, connections etc complete as required.

Supplying of 3 core x 4.0 sq mm size copper Armoured XLPE/PVC insulated and PVC sheathed cable of 1.1 KV grade.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface / recess including cutting the wall and making good the same in case of recessed cable (a) Upto 35 sq. mm

Supplying and fixing of PVC Gear box i/c 10 Amp SP MCB, Connector, Mounting for MCB, MS Clamp, bolt and nuts complete etc as required.

Providing, laying and fixing of 50 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc complete as required.

Supplying and fixing of LED strip in required colour including driver, adapter, connections etc complete as required.

Supplying and laying of PVC insulated twin core flat 1.5 Sq.mm copper wire including connections etc complete as required.

Sub-Head - III Internal Electrification Work.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Rewiring for Light point / Fan point Exhaust fan point / Call bell point with 1.5 sq. mm. FR PVC insulated, copper conductor cable and 1.5 sqmm FR PVC insulated copper conductor single core cable as earth wire in the existing surface / recessed steel / PVC conduit including dismantling as required.

Group A

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2x 2.5 sqmm + 1 x 2.5 sq. mm earth wire

2x 4 sqmm + 1 x 4 sq. mm earth wire

2x 6 sqmm + 1 x 6 sq. mm earth wire

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface / recessed PVC / Steel conduit / PVC casing and capping as required.

2 x1.5 sq. mm

3 x1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

2 x 6 sq.mm

3 x 6 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing following piano type switch/socket on the existing switch box / cover including connections etc. as required.

5/6 amp switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

2 way 5/6 amp switch

Bell push

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6 amp switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

3 Module

4 Module

6 Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connections, painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5pin 15 /16 amps modular socket outlet and 15 / 16 amps modular switch, connections, painting etc. as required.

Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing metal box of following sizes (nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required

100mm x 100mm x 60mm deep

150mm x 75mm x 60 mm deep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of aa sizes.

Sub - Head IV :- Repairing, Servicing and Rewinding of Fans, Pumps and Motors.

Repairing and over hauling of Ceiling fans up to 56" sweep including repairing of shaft, disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings / bush.

Repairing and over hauling of Exhaust Fan up to 18" sweep including repairing of shaft, disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings / bush.

Repairing and overhauling of Wall Mounting Fan up to 400 mm sweep including all materials, disconnecting and reinstallation of the same complete as required.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings / bush.

Repairing, over hauling & rewinding of 1 HP Submersible (Sewage) Pump including reinstallation, lowering the same after replacement of gun metal bushes, bearing, waterseal, bearing, plate impeller,sleeves etc. complete in all respect.

Repairing and over hauling of 1 Phase ,1 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts, repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings

Replacement of Impeller.

Repairing and over hauling of 7.5 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings

Replacement of Impeller.

Repairing and over hauling of 3 phase, 10 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts, repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings.

Replacement of Impeller.

Repairing and over hauling of 15 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper

Replacement of Bearings

Replacement of Impeller.

Repairing of 1 HP, 1 phase, 50 Hz Submersible pump including replacement of gun metal budhes, waterseal,thrust bearing plate impeller, sleeves etc. complete in all respect.

Rewinding of 1 HP , 1 Phase 50 Hz Submersible motor with water proofing copper wire of apporprite size and complete overhauling of motor, replacement of all necessary spare required or smooth functioning of submersible motor etc complete in all respect.

Lifting and lowering of 1 HP, 1 phase, 50 HZ Submersible Pump-Motor in exiting bore well etc. complete in all respect.

Repairing of 5 HP, 25 stage, 3 Phase Submersible Pump including replacement of gun metal budhes, waterseal,thrust bearing plate impeller, sleeves etc. complete in all respect.

Rewinding of 5 HP, 25 stage, 3 Phase Submersible Motor with water proofing copper wire of apporprite size and complete overhauling of motor, replacement of all necessary spare required or smooth functioning of submersible motor etc complete in all respect.

Lifting and lowering of 5 HP 25 stage, 3 phase Submersible Pump-Motor in exiting bore well etc. complete in all respect.

Repairing of 7.5 HP, 3 Phase Submersible Pump including replacement of gun metal budhes, waterseal,thrust bearing plate impeller, sleeves etc. complete in all respect.

Rewinding of 7.5 HP, 3 Phase Submersible Motor with water proofing copper wire of apporprite size and complete overhauling of motor, replacement of all necessary spare required or smooth functioning of submersible motor etc complete in all respect.

Lifting and lowering of 7.5 HP, 3 phase Submersible Pump-Motor in exiting bore well etc. complete in all respect.

Rewinding, repairing and over hauling of 7.5 HP Openwell Submercible Pump- Motor including lifting, lowering, replacement of water seal, rusted nut & bolts, bearing etc. after disconnecting and reinstallation of the same complete in all respect. (NOTE :- Pump installed at underground water tank)

Repairing of Heat Convectors including replacement of all necessary spares to make them operational including following spares.

Heating Element

Blower Motor

Repairing of Geyser of all make & capacity including replacement of necessary spares and following spares to make them operational.

Heating Element 2 KW

Thermostat

Assemebly

Repairing of food Hot Case (painmarie) of all make & capacity including replacement of necessary spares and following spares to make them operational.

Heating Element

Thermostate

Repairing of Fly Insects Killer instuments all make including replacement of necessary spares and following spares to make them operational.

Ultra Voilet Tube 20 W

High Voltage Transformer

Sub - Head V :- Buy Back Item "As is where is basis".

Salvage value of dismantled / old Ceiling Fan 1200 mm sweep "As is where is basis"

Salvage value of dismantled / old Wall Mounting 400 mm sweep "As is where is basis"

CIS GLOBAL INFRATECH PRIVATE LIMITED