Repair and maintenance work at Circuit House Meerut

Anti termite treatment of soil under existing floor using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement:2 Coarse sand) to match the existing floor: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

20 MM thick plaster on wall in 1 : 4 ( 1 cement , 4 course sand ) with water proofing compund ( Dr fixit )

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. ( in two coat )

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing bright finished brass handles with screws etc. complete : 125 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460 mm bowl depth 200 mm.

Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps, 32mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White vitreous China; Wash basin size 630 x 450 mm with a single 15 mm C.P.brass pillar taps

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS :7231, with all fittings and fixtures complete:10 litre capacity -White

Providing and fixing P.V.C.waste pipe for sink or wash basin including P.V.C.waste fittings complete: Flexible pipe; 32 mm dia

Providing and fixing mirror of superior glass (of approved quality) nad of required shape and size with plastic molded frame of approved make and shade with 6 mm thick hard board backing: Circular shape 450 mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length; 15 mm nominal bore

Providing and fixing C.P.brass shower rose with 15 or 20 mm inlet: 150 mm diameter

Providing and fixing C.P.brass long nose bib cock of approved quality conforming to IS standard and weighing not less than 810 gms: 15 mm nominal bore

Providing and fixing C.P.brass stop cock (concealed) of standard design and of approved make conforming to IS :8931: 15 mm nominal bore

Providing and fixing C.P.brass angle valve for basin mixer and gyser points of approved quality conforming to IS :8931: 15 mm nominal bore

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipe and fittings:

Providing and fixing soil, waste and vent pipes : 100 mm dia; Sand cast iron S&S pipe as per IS: 1729

Providing and fixing plain bend of required degree: 100 mm; Sand cast iron S&S as per IS-1729

Providing and fixing single equal plain junction of required degree: 100 x 100 x 100 mm; Sand cast iron S&S as per IS-1729

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm

Providing and fixing G.I.pipes complete with G.I.fittings and clamps,including cutting and making good the walls etc.; Internal work - Exposed on wall; 15 mm dia.nominal bore

Providing and fixing G.I.pipes complete with G.I.fittings and clamps,including cutting and making good the walls etc.; Internal work - Exposed on wall; 20 mm dia nominal bore

Providing and fixing G.I.Union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (new work): 15 mm nominal bore

Providing and fixing G.I.Union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (new work): 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality complete: High or low pressure with plastic floats; 20 mm nominal bore

Providing and placing on terrace (at all floor levels) Polythylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.