Construction of Residential Accommodation for Officers Officials of Assistant District Attorney Amb Tehsil Amb Distt. Una HP SH CO 4Nos TypeIII quarters with parking including Main Building Water supply and Sanitary Installation, Septic Tank and soak

Amount

Excavation in earth work in foundation and trenches etcetera in all kind and classification of soil such as pick work, jumper work, pick jumper work, blasting work and hard blasting work and saturated soil any other mixed verity of soil in dry or saturated condition upto any depth and lift upto any height including chiseling/wedging out rocks where blasting prohibited dewatering pumping or bailing out water where required and/ removal of slush seprately as directed which may arise during the execution including stacking the serviceable and unserviceable material and then returning stacked soil in any thickness of layers when required into plinth side of foundation etcetera consolidating each deposited layers by ramming and watering then disposing of all surplus unserviceable excavated earth as specified dumping place as per the direction by Engineer in charge including entire carriage of materials sale tax with in all leads and lifts and other incidentialss. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Filling available excavated earth or obtained from borrow pit (excluding rock) in trenches, plinth, sides of foundations etceteraetera in layers not exceeding 20cm (twenty centimeter) in depth, consolidating each deposited layer by ramming and watering, upto any lead and lift as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in foundations, footings, bases of columns, etceteraetera for mass concrete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Columns, Pillars, Piers, Abutments, Posts and Struts as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Suspended floors, roofs, landings, balconies and access platformas per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Lintels, beams, plinth beams, girders, bressumers and cantilevers as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Stairs, (excluding landings) except spiral stair cases as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Edges of slabs and breaks in floors and walls under 20cm (twenty centimeter) wide as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:4:8(one cement: four sand: eight graded/crushed stone aggregate 40mm (forty miillmeter) nominal size mechanically mixed and curing complete excluding cost of centering and shuttering in foundation and plinth level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:3:6 (one cement:three sand: six graded/crushed stone aggregate 40mm (forty millimeter) nominal size mechanically mixed and curing complete excluding cost of centring and shuttering in foundation and plinth level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying in position cement concrete M-20 design mix to obtain the compressive strength of 20N/mm² with graded crushed stone aggregate 20mm (twenty millimeter) nominal size to give smooth and even surface with minimum cement contents not less than at the rate of 320 kg (three hundred twenty kilogram) per cubic meter mechanically mixed including curing complete excluding cost of form work in foundation and plinth level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed M-25 (M-twenty five) grade design mix to obtain compressive strength of 25N/mm² cement concrete for reinforced cement concrete work, using cement content as per approved design mix with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability in foundations, footings, bases of columns and the like and mass concrete, attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts and in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing Mild steel and Thermo-Mechanically Treated bars of grade Fe-500D or more/Tor steel reinforcement approved make i.e. SAIL, RINL,Shyam Steel/TISCO Jindal Panther(JSPL) for reinforced cement concrete work including bending binding straightning and placing in position complete including cost of binding wire upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing Smooth finishing of the exposed surface of R.C.C. work with 6 mm (six millimeter) thick with cement mortor 1:3 (one cement : three sand) in any floor/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to any floor level/height including scaffolding in cement mortor 1:6 (one cement: six sand) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level in any floor level/height including scaffolding in cement mortor 1:3 (one cement: three sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and filling of hard stone/boulder under floor upto 22.5 cm (twenty two point five centimeter thick at site as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately) as per the direction by the Engineer in charge in any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing angle iron frame of door window clearstory window frame manufactured from M.S. angle iron section of 40mm x 40mm x 5mm (forty into forty into five millimeter) and 50mmx4mm (Fifty into four millimeters) thickness mild steel flat in combination welded together to make one frame including hinges jamb, lock jamb, bed and if required angle threshold of mild steel angle 50x25mm (Fifty into twenty five millimeters) welded or rigidly fixed by mechanical means lugs with split and tails to each jamb including steel but hinges 2.5mm (Two point five millimeters) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm (twenty five millimeter0 to 40 mm (forty millimeter) thick in second class teak wood as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing fly proof wire gauge to windows, clerestory windows and doors with M.S. Flat 15x3 mm (fifteen into three millimeter) and nuts and bolts complete Stainless steel (grade 304) wire gauze of 0.5 mm (zero point five millimeter) dia wire and 1.4 mm (one point four millimeter) aperture on both sides upto any floor leven/height as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 35 mm (thirty five millimeter) thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm (tywelve millimeter) thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade -1, Type II marked upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm (twenty five millimeter) to 40 mm (forty millimeter) thick decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. grills of required pattern in frames of windows etceteraetera with M.S. flats, square or round bars etceteraetera including priming coat with approved steel primer all complete fixed to openings /wooden frames with rawl plugs screws etceteraeteraupto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 300x16mm(three hundred into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etceteraetera complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x16mm(two hundred fifty into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etceteraetera complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 200x10mm (two hundred into ten millimeter ) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etceteraetera complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etceteraetera complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etceteraetera complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing aluminium hanging floor door single rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etceteraetera complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etceteraeteracomplete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 18 mm (eighteen millimeter) thick, 150 mm (one hundred fifty millimeter) wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm (six millimeter) coir veneer board, nickle plated M.S. Pipe 20 mm (twenty millimeter) dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm (twenty five into three millimeter) M.S. Flat 10 cm (ten centimeter) long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm (one hundred millimeter into forty millimeter into forty millimeter) on both inner side of pelmet and rawl plugs 75 mm (seventy five millimeter) long etceteraetera all complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing 40x5 mm (forty into five millimeter) flat iron hold fast 40 cm (forty centimeter) long including fixing to frame with 10 mm (ten millimeter) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimeter) 1:3:6 mix (one cement : three coarse sand : six graded/crushed stone aggregate 20mm (twenty millimeter) nominal size upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality , Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing bright finished brass 100 mm (one hundred millimeter) mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etceteraetera complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality , Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg (thirty six kilogram) to 80 kg (eighty kilogram) and door width from 701 mm (seven hundred one millimeter) to 1000 mm (one thousand millimeter), with double speed adjustment with necessary accessories and screws etceteraetera complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality , Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

40 mm(forty millimeter) thick with 20 mm (twenty millimeter) nominal size stone aggregate Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded/crushed stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etceteraetera complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying plaster of paris putty of 2 mm (two millimeter) thickness over plastered surface to prepare the surface even and smooth complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality , Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

25mm (twenty five millimeter) thick Kota stone slab flooring over 20 mm (twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortor 1:4 (one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete 25mm (twenty five millimeter) thick (yellow marble band to be paid seprately) upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 600mm x 600mm (six hundred millimeter into six hundred millimeter) ten millimeter thick double charged vitrified floor tiles of Kazaria, NITCO, SOMAMY, ORIENT, RAK make with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etc., complete upto any floor leven/height as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying five point five millimeter or more thick Non Slippary Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimeter) (thickness to be specified by the manufacturer) of first quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimeter) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm (three point three kilogram per square meter) including pointing the joints with white cement and matching pigment etc., complete upto any floor leven/height as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing five point five millimeter or more thick Ist quality ceramic glazed wall tiles conforming to IS: 15622 of Kazaria, NITCO, SOMAMY, ORIENT, RAK make , in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (one cement : three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per square meter), including pointing in white cement mixed with pigment of matching shade complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen millimeter) thick stone slab over 20 mm (twenty millimter) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 60mm (sixty millimeter) thick NTC make faciory made cement concrete interlocking paver block of M -40 (M-forty) grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over and including 50mm (fifty millimeter) thick compacted bed of coarse sand, filling the joints with line sand etceteraetera all complete any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A D-plast/Finolex, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion,-Single socketed pipes as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 100mm ( one hundred millimeter) diameter M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm (ten into ten into ten centimeter) of 1:2:4 mix (one cement : two coarse sand : four graded/crushed stone aggregate 20 mm (twenty millimeter) nominal size) and cost of cutting holes and making good the walls etceteraetera as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) coupleron wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing M.S. tube hand rail of approved size by welding etcetera to steel ladder railing, balcony railing, stair case railing and similar works, including applying priming coat of approved steel primer as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Steel work in built up tubular (round, square or rectangular hollow Hot finished welded type tubes etcetera) trusses etcetera, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etceteraetera complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting steel work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety liter per ten square meter) over an under coat of primer applied @0.80 ltr/10 sqm (zero point eighty liter per ten square meter) of approved brand and manufacture in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety liter per ten square meter) over an under coat of primer applied @0.0.75 ltr/10 sqm (zero point seventy five liter per ten square meter) of approved brand and manufacture in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

12mm (twelve millimeter) Cement plaster on the non fair side of single or half brick wall of mix cement mortor 1:4 (one cement: four fine sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) Cement plaster on the non rough side of single or half brick wall of mix cement mortor 1:4 (one cement: four fine sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

12mm (twelve millimeter) Cement plaster on the fair side of single or half brick wall of mix cement mortor 1:4 (one cement: four fine sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm (one millimeter), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Distempering Two or more coats on new work with first quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre (fifty grams per liter), of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including water thinnable priming coat with cement primer in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing walls with Acrylic Smooth exterior paint of required shade New work two or more coats applied on walls @ 1.67 ltr/10 sqm (one point sixty seven liter per ten square meter) over and including one coat of Special primer applied @ 2.20 kg /10 sqm (two point twenty kilogram per ten square meter) as per the direction by the Engineer in charge in all floor leve/height including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded/crushed stone aggregate 20 mm (twenty millimeter) nominal size over 75mm (seventy five millimeter) thick bed of dry brick ballast 40 mm (forty millimeter) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing and finishing the top smooth upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying cement slurry on reinforcement cement concrete slab or cement concrete work using 2.75 kg. (two point seven five kilogram) of cement per square meter of floor area before laying cement concrete flooring including roughening cleaning of concrete surface complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (one cement : three fine sand) mixed with 2% (two percent) of integral water proofing compound by weight of cement, over 12 mm (twelve millimeter) layer of cement mortar 1:3 (one cement : three fine sand) and finished neat with common burnt clay F.P.S. (non modular) brick tiles of class designation 10(ten) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Making water Purnalas 25cm (twenty five centimeter) to 35cm (thirty five centimeter) wide alongthe wall with cement mortor 1:4 (one cement: four course sand) finished neat with floating coat of neat cement in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement water treatment with doctor fixit or equivalent 6.7 sqm/kg (six point seven square meter oblique per kilogram) with two component polymer modified cementitious coating consisting of material cementitious power and a polimer liquid in two coat for first coat clean and saturate surface and then applying a coat of Dr. fixit and the same process shall be extended upto 300mm (three hundred millimeter) vertically and second coat of shall be applied in opposite direction after four to six hours of application of firstly coat then sprinks sand on top surface of applied Dr. fixit then apply cement mortor 1:4 (one cement: four sand) and admixed with 200ml (two hundred millilityer) of pidiproof LW @ 200 ml (two hundred milliliter) per 50 kg (fifty kilogram) by complete as per the architect drawing in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing aluminum sheet 1mm (one millimeter) thick in expansion joints vertically fixed with screws or nails complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white Vitreous china Orissa pattern W.C. pan of size 580x440 mm (five hundred eighty into four hundred forty millimeter) with integral type foot rests water closet squatting pan (Indian type W.C. pan ) with 100 mm (one hundred millimeter) sand cast Iron P or S trap, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete approved quality of preferred make as per standard bidding document, including cutting and making good the walls and floors wherever required as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing W.C. pan with ISI marked approved quality of preferred make as per standard bidding document white solid plastic seat and lid white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets a, 15 mm (fifteen millimeter) dia CP Brass single hole basin mixer of approved quality of preferred make as per standard bidding document, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred millimeter) with a 15 mm (fifteen millimeter) CP Brass single hole basin mixer as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal of approved quality of preferred make as per standard bidding document for wash basin completely recessed at the back for the reception of pipes and fittings as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing P.V.C. waste semi rigid pipe approved quality of preferred make as per standard bidding document for sink or wash basin including P.V.C. waste fittings complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm {(fifteen millimeter into fifty millimeter)} of approved quality of preferred make as per standard bidding document and quality as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 600x450 mm (six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass of approved quality of preferred make as per standard bidding document complete with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 610x460 mm (six hundred ten into four hundred sixty millimeter bowl depth 200 (two hundred) Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm(forty millimeter), including painting of fittings and brackets, cutting and making good the walls wherever required approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PTMT towel rail complete of approved quality of preferred make as per standard bidding documentwith brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundred millimeter) long towel rail with total length of 645 mm (six hundred forty five millimeter), width 78 mm (seventy eight millimeter) and effective height of 88 mm, weighing not less than 190 gms (one hundred ninety grams) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimeter) glass shelf of approved quality of preferred make as per standard bidding document with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etceteraetera, complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore, 107 mm (one hundred seven millimeter) long, weighing not less than 110 gms (one hundred ten grams) PTMT pillar cock of approved quality of preferred make as per standard bidding document and colour as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass stop cock (concealed) of standard design and ofapproved quality of preferred make as per standard bidding document conforming to IS:8931 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore uplasticised PVC connection pipe with brass unions approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PTMT liquid soap container 109 mm (one hundred nine millimeter) wide, 125 mm (one hundred twenty five millimeter) high and 112 mm (one hundred twelve millimeter distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality of preferred make as per standard bidding document and colour, weighing not less than 105 gms (one hundred five grams) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal ball valve (brass) of approved quality of preferred make as per standard bidding document as per standard bidding document, High or low pressure, with plastic floats complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter) nominal boregun metal gate valve with C.I. wheel of approved quality of preferred make as per standard bidding documentt as per standard bidding document (screwed end)as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) nominal bore brass stop cock of approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) PVC single equal branch of required degree with ovel access door ISI marked inspection rubber 3mm (three millimeter)thick bolts and nuts complete including fixing with approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) nominal bore ball valve (brass) of approved quality of preferred make as per standard bidding document, High or low pressure, with plastic floats complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) coupler on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion complete approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) coupler on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion complete approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Single tee without door 75x75x75 mm (seventy five into seventy five into seventy five millimeter) on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion complete approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Single tee without door 110x110x110mm (one hundred ten into one hundred ten into one hundred ten millimeter) on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion complete approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia high pressure PVC spigot and socket waste and ventilating pipes D-plast/Finolex as per standard bidding document including fixing with approve adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Bend 87.5° 75mm (seventy five millimeter) on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion complete approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Bend 87.5° 110mm (one hundred ten millimeter) on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion complete approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying CI cover lightly duty rectangular approved quality of preferred make as per standard bidding document 455x610mm (four hundred fifty five into six hundred ten millimeter) with frame weight 23 kg (twenty three kilogram) single seat pattern-1 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying CI cover lightly duty rectangular approved quality of preferred make as per standard bidding document 455x610mm (four hundred fifty five into six hundred ten millimeter) without frame for manhole, the weight of the cover to be not less that 38 kg (thirty eight kilogram) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimeter) inlet and 100 mm (one hundred millimeter) outlet Sand cast iron S&S as per IS: 3989 trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) unplasticised -PVC pipe clips of approved esign to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into fifty millimeter) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etceteraetera complete make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) unplasticised -PVC pipe clips of approved esign to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into fifty millimeter) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etceteraetera complete make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimeter) nominal dia circular type PTMT grating of approved quality of preferred make as per standard bidding document and colour as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimeter) dia nominal bore G.I. Pipes complete of preferred make of Jindal/Tata, BST, Parkash Surya as per standard bidding document with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimeter) dia nominal bore G.I. Pipes complete of preferred make of Jindal/Tata as per standard bidding document with G.I. fittings and clamps in internal work exposed on wall, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter) dia G.I. pipes complete with G.I. fittings in extended work including trenching and refilling etcetera approved quality of preferred make TATA/JINDAL, AVR, RR as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) dia G.I. pipes approved quality of preferred make of TATA/JINDAL, BST, Parkash Surya as per standard bidding document complete with G.I. fittings in internal work including trenching and refilling etceteraetera as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore uplasticised PVC connection pipeapproved quality of preferred make as per standard bidding document with brass unions 30Cm (thirty centimeter) Length as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) nominal bore uplasticised PVC connection pipe with brass unions 30Cm (thirty centimeter) Length approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Making connection of G.I. distribution branch approved quality of preferred make as per standard bidding document with G.I.main of 25 to 40mm ( twenty five to forty millimeter) nominal bore by providing and fixing tee,including cutting and threading the pipe etceteraetera complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore G.I. Union approved quality of preferred make as per standard bidding document in G.I. pipe including cutting and threading the pipe and making long screws etceteraetera completeas per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) nominal bore G.I. Union approved quality of preferred make as per standard bidding document in G.I. pipe including cutting and threading the pipe and making long screws etceteraetera completeas per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter) nominal bore G.I. Union approved quality of preferred make as per standard bidding document in G.I. pipe including cutting and threading the pipe and making long screws etceteraetera completeas per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) nominal bore G.I. Union approved quality of preferred make as per standard bidding document in G.I. pipe including cutting and threading the pipe and making long screws etceteraetera completeas per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimeter) internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (one cement : one and half Fine sand : three graded/crushed stone aggregate 20 mm (twenty millimeter) nominal size), foundation concrete 1:5:10 (one cement : five fine sand : ten graded/crushed stone aggregate 40 mm (forty millimeter) nominal size), inside plastering 12 mm (twelve millimeter)thick with cement mortar 1:3 (one cement : three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etceteraetera complete as per standard design Inside dimensions 455x610 mm (four hundred fifty five into six hundred ten millimeter and 45 cm (forlty five centimeter) deep for single pipe line with twenty three centimeter thick wall with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one and half coarse sand (zone- III) : three graded/ crushed stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded/crushed stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : 4 graded/ crushed stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) with common burnt clay F.P.S. (non modular) bricks with twenty three centimeter thick wall of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded/ crushed stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded/crushed stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : 4 graded/ crushed stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) with common burnt clay F.P.S. (non modular) bricks with twenty three centimeter thick wall of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimeter)size (inside) the weight of cover to be not less than 4.50 kg (four point fifty kilogram) and frame to be not less than 2.70 kg (two point seventy kilogram) as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure 1216 (16 mm OD) pipe conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etceteraetera, with clamps at 1.00 (one point zero zero) metre spacing. This includes testing of joints complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure 1620 (20 mm OD) pipe conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etceteraetera, with clamps at 1.00 (one point zero zero) metre ( spacing. This includes testing of joints complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make tripple layer 1000 (one thousand) litre capacity including all fittings approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Filling with brick aggregate in sockpit complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Rahul Verma Govt. Contractor