GE (N) P/TOKEN- 42 OF 2024-2025 SMART PERODICAL WORK AND JOINERY WORK OTM ACCN INCLUDES HQ CEPZ ZRO, DEO OFFICE, COMD LIB, VETRENE NODE, COMD CANTEEN, AWWA COMPLEX, AGE E/M OFFICE AND OTHER MISC LOCATION UNDER AGE B/R (CENTRAL) OF GE (NORTH) PUNE

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 15.0m height of Bldg complete all as specified and as directed

M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement upto 15.0m height of Bldg with using @ 2% WPC on cement complete all as specified and as directed (Note: WPC shall be measured and paid separately).

M&L for rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:6 fair finished even and smooth without using extra cement upto 12.0mtr height of bldg complete all as specified and as directed

M&L for 10mm thick cement plaster in CM 1:3 on concrete ceiling surfaces finishing the surfaces even and smooth without using extra cement at any height of Bldg complete all as specified and as directed

Supply only for liquid water proofing compound

M&L for PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in foundations, sub base of floor,filling and mass concrete including demolition of existing complete all as specified and as directed

M&L for Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks exc 10 cm in width, 1:3:6 mix type C-1, (using 20mm graded stone aggregate) and setting in cement mortar 1:6 including demolition of existing complete all as specified and as directed

M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of new plastered surfaces of wall and applying two coats of Oil bound distemper of any tint over a coat of alkali resistance primer over a thin layer (1 mm to 1.5 mm) of wall care putty upto 12.0mtr height of Bldg complete all as specified and as directed

M&L for preparation of new plastered ceiling surfaces and applying two coats of Oil bound distemper over a coat of alkali resistance primer upto 12.0mtr height of Bldg complete all as specified and as directed

M&L for preparation of old treated wall surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer using Electrically opreated spray machine including complete removal of existing treatment using electrically opreated dry wall sanding machine complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of old surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to mangalore tiles, roof, parapet, wall ,floor etc, on heritage buildings using Electrically opreated spray machine including complete removal of existing treatment by using electrically opreated dry wall sanding machine complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of old decorated surfaces and applying one coat of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of old decorated surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for applying two coats of Oil bound distemper over a coat of primer over a layer of wall care putty (1 to 1.5 mm thick) on wall surfaces including complete removal of existing treatment complete all as specified and as directed

M&L for applying two coats of Oil bound distemper over a coat of primer over a layer of wall care putty (1 to 1.5 mm thick) on ceiling surfaces including complete removal of existing treatment complete all as specified and as directed

M&L for preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing, scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of Oil bound distemper on old surfaces of walls complete all as specified and as directed

M&L for preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying two coats of Oil bound distemper on old surfaces of walls complete all as specified and as directed

M&L for preparation of old plastered or unplastered ceiling surfaces including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of Oil bound distemper complete all as specified and as directed

M&L for preparation of old plastered or unplastered ceiling surfaces including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying two coat of Oil bound distemper complete all as specified and as directed

M&L for preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for preparation of old surfaces of wood and applying one coat of synthetic enamel paint on ceiling surface complete all as specified and as directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of wall and applying two coats of plastic emulsion paint complete all as specified and as directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of ceiling and applying one coat of plastic emulsion paint complete all as specified and as directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of ceiling and applying two coats of plastic emulsion paint complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of lustre paint by means of macanical equipments (Electrically opreated spray machine) complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of lustre paint by means of macanical equipments (Electrically opreated spray machine) complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of lustre paint by means of macanical equipments (Electrically opreated spray machine) complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of lustre paint by means of macanical equipments (Electrically opreated spray machine) complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of Royale lustre paint by means of macanical equipments (Electrically opreated spray machine) complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of Royale lustre paint by means of macanical equipments (Electrically opreated spray machine) complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of Royale lustre paint by means of macanical equipments (Electrically opreated spray machine) complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying two coats textured paint including base coat of asian paints or equivalent complete all as specified and as directed.

M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces complete all as specified and as directed

M&L for applying wall care putty 1 to 1.5 mm thick on celing surfaces complete all as specified and as directed

M&L for preparation of old wooden/wood base surfaces of wall/floor and applying two coats of malamine polish including filling of cracks and holes etc complete all as specified and as directed.

M&L for 10 mm thick Gymsum board (mositure resistant) seamless as in the ceiling/ linning fixed with counter sunk screws on and incl GI channels frame work of stardard section as per manufacture,s instructions, fixed @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangmentat their junction point at desired heights below roof slab and incl two coats of plastic emulsion paint over a coat of primer on exposed surfaces. (The frame work shall be fixed with the help of GI suspenders of suitable size with the help of dash fasteners and along wall, making good disturbed surfaces, smoothening the gypsum board, POP lining at joints as required) including dismantling of existing board complete all as specified and directed. Make : Gyproc-saint Gobain/Armstong/Diaken.

M&L in repairs for POP cornices of approved size and shape for seamles false ceiling incl necessary hanging arrangments atc complete all as specified and as directed.

Material and labour for 8 to 10mm thick PVC prelaminated Gypsum board false ceiling board on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.0 mm x 20 mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 25 mm x 25 mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age, Gyprock as approved by GE.

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as specified and as directed.

S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as specified and as directed.

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia of bore complete all as specified and as directed

-Ditto- all as per item No 52 here in before but on 75mm dia of bore

Dismantling and refixing of Roof tiles, Mangalore pattern,interlocking at side joints, laid dry complete all as specified and as directed

S & F of Roof tiles, Mangalore pattern,interlocking at side joints, laid dry incl dismantling of existing tiles complete all as specified and as directed

S & F of Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 incl dismantling of existing tiles complete all as specified and as directed

S&F 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames in any height of Bldg including necessary scaffolding etc complete all as specified and as directed

S&F rotational moulded polyethylene water storage tank 3 layer black/white colour water tank, non- toxic effect, algea foRMation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed.

-Ditto- all as per item No 58 here in before but 1000 Ltrs capacity complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm aggregate) Cement concrete as in sub base including demolition of damaged PCC sub base complete all as specified and as directed

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including demolition of existing as directed

Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and as directed

All as per item No 62 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and as directed

S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm includinguding 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and as directed.

S&F for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and as directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and as directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S&F Factory made PVC Flush door of 33 to 35 mm thick overall thickness comprising of 19 SWG MS tube of size 19 x 19 mm (19 gauge) covered with 5mm thick PVC Sheet, (any colour as approved) on both sides core shall be filled with 19mm to 20mm thick PVC solid board complete all as specified and as directed Note : All screws shall be self tapping chroming plated all as specified and directed by Engineer-in-Charge.

Supply and fix second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.36mm and fixed with stainless steel wire staples complete all as specified and as directed

M & L for Double charged vitrified Ceramic tiles, 8 to 10 mm thick (square/rectangular), polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 20 mm thick bedding layer of cement mortar 1:4 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish from the premises complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 15 mm thick cement mortar 1:4 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

M&L for Glazed coloured ceramic tiles in vertical surface 300mmx450mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including backing coat of 10 mm thick in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed:- (a) Complete Removal of existing waterproofing treatment / membrane including screed bed/ plaster and removing the material where directed to a distance not less than 500m and cleaning the roof surface with water (b) Providing 10 mm thick plaster on roof surface in CM (1:4) with using WPC as per manufacturers instructions. (c) Cleaning the plastered surface and applying Oil Based Bituminous primer @ 0.25 ltrs/ Sqm. (d) Applying hot blown bitumen of grade 85/25 @ 1.20 Kgs/ Sqm. (e) Laying APP Modified bituminous membrane 3mm thick weighing not less than 3.50 Kgs/ Sqm with non woven polyester mat as reinforcement with plain finish laid over hot bitumen on roof surface. (f) Applying two coats of bituminous aluminium paint on APP membrane surface. (g) Overlaps (end and longitudinal) shall be finished by torch application. Note No (i) : Overlaps shall be provided as under End Over Laps - 150mm Longitudinal overlaps 100mm. (ii) : Waterproofing Compound shall be measured and paid separtely under relevant item.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

K.K.Enterprises (BID ID -3223366)

M/S Eknath agencies (BID ID -3218186)

Sai Construction (BID ID -3217529)

J D Contruction (BID ID -3223294)

VIRENDRA FABRICATORS (BID ID -3217828)

M/s.BAJRANG CONSTRUCTION (BID ID -3217381)