Balance work for soft upgradation and Divyangjan facility at Andul & Uluberia Stations under ABSS in KGP Division.

(Prices are inclusive of GST)

Item- 3 NS items for Electrical schedule.

S No. Item No Description of Item Unit Qty Rate Amount

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

Multistrand (22/0.3mm), Copper

Conductor (flexible), Unsheathed, FR-

LSH, PVC insulated Cable of 1100V

grade, Type-C PVC Compound as per IS

5831, Conforming to IS :694 - 2010

(Reaffirmed 2020), ISI marked,through

PVC Conduit Pipe of Nominal Size

20mm/25mm(as per site requirement)

and in the length of 3 mtrs, Socket ended

(at one end ), medium mechanical stress,

White Color, Resistant to Flame

Propagation to grade UL-94 V0,

Conforming to IS 9537 (Part 3) 1983

(Reaffirmed Year : 2017) with

amendment no. 2 or latest with ISI mark.

Modular Electrical Switch, 6 A, 230 V, SP,

1 Way, 1 Module, Unenclosed type as per

Clause no.7.1.3, Method of Activation of

switch shall be of Rocker type as per

Clause no. 7.1.5, Switch shall be Flush

type as per Clause no.7.1.6 and shall be

installed as per Design A mentioned in

the Clause no.7.1.7, Current carrying

material as per Clause no. 22.5, with

cover made of tough non-ignitable

insulating material and bare of tough

non-ignitable insulating material or of

vitrified ceramic material, Conforming to

IS:3854/1997 (reaffirmed 2017) with

latest amendments and ISI mark.

including supply of all required materials

like lamp holder,Aluminium, batten type,

with shade carrier ring,ISI marked, Base:

B-22 suitable for use at 250V,

Conforming to IS: 1258(Rev.-3)-

2005)with amdt-3. With BACK plate of 53

MM. Dia & 45 MM PCD.., ceiling rose,

Modular type Socket outlet suitable for 3

pin plug, 6A, 230V, 2 Module, Shuttered

(Operation of Shutter should be

independant of Earthing Point), Cover

made of tough Non-Ignitable insulating

material, material of base -vitrified

ceramic, Conforming to IS : 1293-2019,

Amendment no. 1 or latest with ISI mark

,suitable moduler stainless steel JB box

with moduler PVC cover , stainless steel

switch Board with moduler PVC

cover,PVC Spacers, PVC Saddles,PVC

Bends, PVC Tees to be provided as and

where required as per direction of

consignee,. Provision of moduler fan

regulator should be kept on switch board

. The plate should include 2 blank space

for further installation of

switches.including stainless steel

fastener, Pin Type Terminal End Lugs as

per specification attached. All materilas

would be as per latest specification as

issued from HQ/GRC time to time if

available or latest IS and IE rules which is

available.Covers or cover parts or parts

of them, which are intended to ensure

protection against electric shock, shall be

held in place at two or more points by

effective fixings..The cost includes supply

of all materials to complete job. ( Two 5-

ampere socket point treated as one

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

2 2 Concealed Sub circuit wiring by 2.5 sq. Metre 2000.00 182.58 365160.00

mm, Single Core, Multistrand

(36/0.3mm), Copper Conductor(flexible),

Unsheathed, Flame Retardant Low

Smoke and Halogen (FR-LSH), PVC

insulated Cable of 1100V grade, Type C

PVC Compound as per IS 5831,

Conforming to IS: 694-2010(reaffirmed

2020), ISI marked. with 2.5Sq mm

earthing wire of Single Core, Multistrand

(36/0.3mm), Copper Conductor(flexible),

Unsheathed, Flame Retardant Low

Smoke and Halogen (FR-LSH), PVC

insulated Cable of 1100V grade, Type C

PVC Compound as per IS 5831,

Conforming to IS: 694-2010(reaffirmed

2020), ISI marked. through PVC Conduit

Pipe of Nominal Size 25mm and in the

length of 3 mtrs, Socket ended (at one

end ), medium mechanical stress, White

Color, Resistant to Flame Propagation to

grade UL-94 V0, Conforming to IS 9537

(Part 3) 1983 (Reaffirmed Year : 2017)

with amendment no. 2 or latest with ISI

mark with Supply & fixing of PVC Circular

Box and Ceiling rose if required with

connection from running circuit as per

direction of Consignee. including

stainless steel fastener, Pin Type

Terminal End Lugs as per specification

attached. All materilas would be as per

latest specification as issued from

HQ/GRC time to time if available or latest

IS and IE rules which is available.The cost

includes supply of all materials to

complete the job. *Quantity per meter

means-one meter conduit with 2 (two)

meters Cu. cable of size 2.5 sq mm for

phase & neutal and 1mtr of 2.5 Sq.mm

PVC Cu. cable as earthing with Supply of

PVC Circular Box and Ceiling rose as per

direction of Consignee.

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

3 3 Concealed Sub circuit wiring by 4 sq. Metre 1200.00 220.28 264336.00

mm, Single Core, Multistrand

(56/0.3mm), Copper Conductor (flexible),

Unsheathed, Flame Retardant Low

Smoke and Halogen(FR-LSH), PVC

insulated Cable of 1100V grade, Type C

PVC Compound as per IS 5831,

Conforming to IS :694 - 2010 (Reaffirmed

2020), ISI marked with 4 Sq mm earthing

wire of Single Core, Multistrand

(56/0.3mm), Copper Conductor (flexible),

Unsheathed, Flame Retardant Low

Smoke and Halogen(FR-LSH), PVC

insulated Cable of 1100V grade, Type C

PVC Compound as per IS 5831,

Conforming to IS :694 - 2010 (Reaffirmed

2020), ISI marked through PVC Conduit

Pipe of Nominal Size 25mm and in the

length of 3 mtrs, Socket ended (at one

end ), medium mechanical stress, White

Color, Resistant to Flame Propagation to

grade UL-94 V0, Conforming to IS 9537

(Part 3) 1983 (Reaffirmed Year : 2017)

with amendment no. 2 or latest with ISI

mark including stainless steel fastener,

Pin Type Terminal End Lugs as per

specification attached. All materilas

would be as per latest specification as

issued from HQ/GRC time to time if

available or latest IS and IE rules which is

available.The cost includes supply of all

materials to complete the job. *Quantity

per meter means-one meter conduit with

2 (two) meters Cu. cable of size 4 sq mm

for phase & neutal and 1mtr of 4 Sq.mm

PVC Cu. cable as earthing.

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

4 4 Concealed Sub circuit wiring by 6 sq. Metre 400.00 285.93 114372.00

mm, Single Core, Multistrand

(84/0.3mm), Copper Conductor (flexible),

Unsheathed, , Flame Retardant Low

Smoke and Halogen(FR-LSH), PVC

insulated Cable of 1100V grade, Type C

PVC Compound as per IS 5831,

Conforming to IS :694 - 2010 (Reaffirmed

2020), ISI marked with 6 Sq mm earthing

wire of Single Core, Multistrand

(84/0.3mm), Copper Conductor (flexible),

Unsheathed, , Flame Retardant Low

Smoke and Halogen(FR-LSH), PVC

insulated Cable of 1100V grade, Type C

PVC Compound as per IS 5831,

Conforming to IS :694 - 2010 (Reaffirmed

2020), ISI marked through PVC Conduit

Pipe of Nominal Size 25mm and in the

length of 3 mtrs, Socket ended (at one

end ), medium mechanical stress, White

Color, Resistant to Flame Propagation to

grade UL-94 V0, Conforming to IS 9537

(Part 3) 1983 (Reaffirmed Year : 2017)

with amendment no. 2 or latest with ISI

mark including stainless steel fastener,

Pin Type Terminal End Lugs as per

specification attached. All materilas

would be as per latest specification as

issued from HQ/GRC time to time if

available or latest IS and IE rules which is

available.The cost includes supply of all

materials to complete the job. *Quantity

per meter means-one meter conduit with

2 (two) meters Cu. cable of size 6 sq mm

for phase & neutal and 1mtr of 6 Sq.mm

PVC Cu. cable as earthing with Supply of

PVC Circular Box and Ceiling rose as per

direction of Consignee.

5 5 Concealed Sub circuit wiring by 10 sq. Metre 200.00 405.27 81054.00

mm PVC wire with 6 sq. mm earthing

wire of PVC CU wire through PVC conduit

as required of reputed make and site

requirement . The cost includes supply of

all materials to complete job. Cable

would be FRLS type. Make of Cable:

Havells/KEI/Polycab /Finolex/RR

Kabel/RPG Cables/APAR Make of PVC

Condit Pipe: Kalinga/Presto plast/

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

6 6 Supply of modular electrical switches and Numbers 30.00 1316.00 39480.00

accessories with 6A/16 A, 6 Pin Socket,

with Stainless Steel boxes and all other

accessories to complete job for

concealed wiring. Specs: Modular

Electrical Switch, 16 A, 230 V, SP, 1 Way,

1 Module, Unenclosed type as per Clause

no.7.1.3, Method of Activation of switch

shall be of Rocker type as per Clause no.

7.1.5, Switch shall be Flush type as per

Clause no.7.1.6 and shall be installed as

per Design A mentioned in the Clause

no.7.1.7, Current carrying material as per

Clause no. 22.5, with cover made of

tough non-ignitable insulating material

and bare of tough non-ignitable

insulating material or of vitrified ceramic

material, Conforming to IS:3854/1997

(reaffirmed 2017) with latest

amendments and ISI mark, Modular type

Socket outlet, 6 pin, 6A & 16A, 230V, 2

Module, Shuttered (Operation of Shutter

should be independent of Earthing Point),

Cover made of tough Non-Ignitable

insulating material, material of base -

vitrified ceramic, Conforming to IS :

1293-2019, Amendment no. 1 or latest

with ISI mark, with moduler cover plate

and Stainless Steel boxes and all other

accessories including stainless steel

fastener, Pin Type Terminal End Lugs to

complete job as per specification

attached or with latest amendment or

specification issued from HQ/GRC if any

time to time. Make:

Goldmedal/Havells/Polycab/HPL/GM

Electricals/Honeywell/LEGRAND/IS

standard Indian make .

7 7 Fixing and commissioning of modular Numbers 30.00 34.78 1043.40

electrical switches and accessories with

6A/16 A, 6 Pin Socket, with Stainless

Steel boxes, moduler cover plate duly

Concealed in wall surface including all

other accessories to complete job with

latest amendment or specification issued

from HQ/GRC if any time to time,

including stainless steel fastener, Pin

Type Terminal End Lugs as per

specification attached. (Wiring will be

covered under Shedule item No. as per

site requirement).

8 8 Supply of Inverter Based Back-up Numbers 40.00 2200.00 88000.00

Emergency Batten with 22 W LED tube

light LED Rating (in Watts. Inverter light

should be as per RDSO guidelines.(Letter

No: RDSO-EEMoLKO(GUID) /1/2020 DT

9 9 Supply of 20W or higher wattage LED Numbers 120.00 399.01 47881.20

tube light with Batten ( integrated

electronic driver).As per CEGE approved

Specification for LED tube light-high

power,2100 Lumen output,220V, 50Hz

AC with constant current driver with short

circuit and overload protection etc.

10 10 Fixing and Commisioning of 20W or Numbers 120.00 56.52 6782.40

higher wattage LED tube light with

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

11 11 Supply of sensor based street light LED Numbers 14.00 7000.00 98000.00

45 watt or higher wattage street light as

per Specification No. CEE/S/185/

12 12 Fixing and commissioning of LED 45 watt Numbers 14.00 229.92 3218.88

or higher wattage street light including

wiring of light from loop box with proper

termination by Pin Type Terminal End

Lugs including fixing to the arm by mean

of stainless steel screws and stainless

steel fastener as per site requirenment,

to complete the job.

13 13 Supply of Brushless DC (BLDC) Motor Numbers 45.00 3450.00 155250.00

Ceiling Fan, ISI marked, Sweep size: 1400

mm, Minimum Air delivery-210 Cubic

Meter/Min, total harmonic distortion- 8%

[max], Rated Voltage: 230 V,50HZ Single

phase AC, Blade thickness (Min): 1.1mm,

Blade material : Aluminium, Bearing:

Double ball bearings, Down rod size

(without shackle) : 300mm, Shank &

Shackle thickness(Min) : 2mm, canopy : 2

nos., colour standard: white, BEE rating :

5 star (as per Ministryof Power

Notification Number: S.O. 2210 (E) and

S.O. 2211 (E) dated. 12th May 2022 or

latest), Rated power-28 watt [max],

Warranty [Min] 30 Months. Conforming

to- (i)IS:374/2019 with Amendment No.

1/2022 or latest (ii)IS:302 (Part 2/Sec 80)

- For safetyrequirement (iii)IS:14700

(Part 3/Sec2) for THD. Speed control with

electronic regulator (step type with

minimum 5 running positions) and

Regulators shall be provided with

radioand television interference

suppressing devices as per clause 10.7 of

Amendment No. 1/2022to IS 374/2019 or

14 14 Fixing and commissioning of Brushless Numbers 45.00 137.14 6171.30

DC (BLDC) Motor Ceiling Fan, ISI marked,

Sweep size: 1400 mm, suitable for 230V,

50Hz, AC supply confirming to Class:I of

IS: 374/latest. Fixing of the fan shall be

done with suitable clamp, hook, nut/bolts

etc. and connection with flexible twin

twisted multistrand Copper wire and

removing of the existing old fan (if any)

and handing over of the same to Railway

Store with clear acknowledgement, as

per site requirement.

15 15 Supply of Wall Mounted Fan with Numbers 40.00 5440.00 217600.00

Brushless DC (BLDC) Motor, sweep size

400 mm with feature of Oscillaton &

Vertcal Adjustable Tilt Mechanismn

Minimum Air Delivery 65 cubic

meter/min, Rated Voltage: 230 V, 50Hz,

Single phase AC, Motor Winding Material:

Copper, No. ofBlades-3, Provided with

Pull cord or string based speed control

mechanism with minimum 3 speed

stepsn Colour: White, Minimum Service

Value 1.43 as per BEE 5 star rating

(BEE's Schedule- 32, Table & Wall-

Mounted Fan), Conforming to IS 555:1979

(Reaffirmed Year: 2020) with all

16 16 Fixing and Commissioning of Wall Numbers 40.00 151.89 6075.60

Mounted Fan suitable for 230V, 50Hz, AC

supply as per site requirement.

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

17 17 Supply of Propeller type AC Ventilating Numbers 20.00 2300.00 46000.00

Fan (Exhaust Fan) of size 300mm &

4pole, Conforming to IS 2312- 1967 with

all amendments (Reaffirmed 2020) or

latest and ISI mark, Capacitor type,

Rated Voltage-240V±10%, Frequency

50±2 Hz, Insulation material class B,

Minimum Air Delivery as per IS 2312 or

latest, Maximum wattage as per IS 2312

or latest, Motor Enclosure-Totally

Enclosed Type, along with Guard and

other Accessories such as Frame, Legs

Set, Rubber Clamps & Other Hardware

etc, as per Description No.

CEE/S/185/519/Genl., Dtd. 30/05/2022 or

latest. Cost includes Suitable size of

Stainless steel fastener,screw,nuts, bolts

,washer etc as per site requirenment.

18 18 Fixing and commissioning o f Exhaust Numbers 20.00 155.14 3102.80

Fans as per consignee requirement.

19 19 Supply of modular PC Board consisting of Numbers 40.00 1699.19 67967.60

03 nos. switches with inbuilt LED

indication, 03 nos. sockets and modular

SP MCB 10A, 10kA, Type B- 01 No. with

Stainless Steel 12M Box and all other

accessories to complete job for

concealed wiring. Specs: Modular

Electrical Switch, 6 A, 230 V, SP, 1 Way, 1

Module, Unenclosed type as per Clause

no.7.1.3, Method of Activation of switch

shall be of Rocker type as per Clause no.

7.1.5, Switch shall be Flush type as per

Clause no.7.1.6 and shall be installed as

per Design A mentioned in the Clause

no.7.1.7, Current carrying material as per

Clause no. 22.5, with cover made of

tough non-ignitable insulating material

and bare of tough non-ignitable

insulating material or of vitrified ceramic

material, Conforming to IS:3854/1997

(reaffirmed 2017) with latest

amendments and ISI mark and Modular

type Socket outlet suitable for 3 pin plug,

6A, 230V, 2 Module, Shuttered

(Operation of Shutter should be

independant of Earthing Point), Cover

made of tough Non-Ignitable insulating

material, material of base -vitrified

ceramic, Conforming to IS : 1293-2019,

Amendment no. 1 or latest with ISI mark.

with modular SP MCB 10A, 10kA, Type B-

01 No. ISI marked, rated voltage: 240V

AC, conforming to IS/IEC 60898-1:2015

(Reaffirmed Year:2024) or latest, with

rated short circuit current capacity 10KA,

fixed unadjustable time current

characteristics suitable for use in

protection of industrial, commercial and

domestic electrical installations. along

with 12M stainless steel Box, moduler

cover plate and Stainless Steel boxes

and all other accessories including

stainless steel fastener, Pin Type

Terminal End Lugs to complete job as per

specification attached or with latest

amendment or specification issued from

HQ/GRC if any time to time. Make:

Goldmedal/Havells/Polycab/GM

Modular/Orpat Electricals/ Anchor/

Pressfit/IS standard Indian make .

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

20 20 Fixing and commissioning of modular PC Numbers 40.00 26.18 1047.20

Board consisting of 03 nos. switches with

inbuilt LED indication, 03 nos. sockets

and modular SP MCB 10A, 10kA, Type B-

01 No. with Stainless Steel 12M Box,

moduler cover plate duly Concealed in

wall surface including all other

accessories to complete job with latest

amendment or specification issued from

HQ/GRC if any time to time, including

stainless steel fastener, Pin Type

Terminal End Lugs as per specification

attached. (Wiring will be covered under

Shedule item No. as per site

21 21 Supply of recess/surface mounting Numbers 40.00 1591.97 63678.80

2feetX2feet LED Luminaire with 36 watt

with suitable driver as per IS:10322/part

5/sec-2/2012 and IS 16107 (Part2/Sec 1) :

2012 for Recess type or latest. Operating

Voltage and frequency range :140V to

280 V at 50 Hz AC,Color Rendering

Index(CRI) :>/=80,LED chip Efficacy

:>/=120 Lm/Watt.

22 22 Fixing and commissioning of Numbers 40.00 346.85 13874.00

recess/surface mounting 2feetX2feet LED

Luminaire with 36 watt with suitable

driver and all other accessories to

23 23 Supply of DP MCB 32 Amps, ISI marked, Numbers 16.00 1013.00 16208.00

Instantaneous tripping range:C, No. of

poles(PP=Protected pole) 3 pole with

3PP, rated volts 415V, rated current in

Amps 32 conforming to IS:/ IEC: 60898-

1:2015, with rated short circuit current

with Sheet Steel Enclosure suitable for

Double Pole MCB as per IS/IEC 60898-1,

2002 & IS/ERC 60947- 1- 2002 having

charateristics of C/B, with front Sheet

Steel cover, having cut out for

installation of Circuit Breaker. The

enclosure shall be powder coated with

minimum 2 earth points and adequate

din Rail for mounting the Circuit Breaker

as per IS:11039-1983 Top Hat Section

Rail TH: 35/7.5 with Stainless steel

fasteners. The enclosure must have

provision of knockout punches on top

and bottom for conductor entry and exit

and shall be as per IEC 61439-3 with IP-

65 protection.with stainless steel

fastener,wirnig etc as per site

requirement to complete the job.

24 24 Fixing and commissioning of DP MCB 32 Numbers 16.00 74.39 1190.24

Amps, ISI marked, Instantaneous tripping

range:C, No. of poles(PP=Protected pole)

3 pole with 3PP, rated volts 415V, rated

current in Amps 32 conforming to IS:/

IEC: 60898-1:2015, with rated short

circuit current with Sheet Steel Enclosure

suitable for Double Pole MCB as per

2002 having charateristics of C/B, with

front Sheet Steel cover, having cutout for

installation of Circuit Breaker. with cable

and necessary item with stainless steel

fastener,wirnig etc as per site

requirement to complete the job .

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

Busbar chamber ,Busbar made of ETP

Grade Copper with 3 Phase indicators

and all necessary arrangement(stainless

steel fastener,nut,bolt, washer, ,screws

etc.) to completethe job. ,Minimum Sheet

Thickness properly pretreated and stove

enameled/Powder Coated (mm): 1.6 mm

26 26 Fixing and commissioning of Wall Numbers 4.00 199.36 797.44

Mounted 100A 8 WAY Busbar chamber

,Busbar made of ETP Grade Copper with

3 Phase indicators and all necessary

arrangement(stainless steel

fastener,nut,bolt, washer, ,screws etc.) to

completethe job. ,Minimum Sheet

Thickness properly pretreated and stove

enameled/Powder Coated (mm): 1.6 mm

to complete the job as per site

CHANGEOVER SWITCH WITH SS

ENCLOSURE , CURRENT RATING 400

28 28 Fixing and commissioning of 4 POLE ON Numbers 4.00 899.57 3598.28

LOAD CHANGEOVER SWITCH WITH SS

Insulated, 1100 Volts Grade, LT Cable

with improved fire performance category

C2, Stranded Aluminum Conductor

complying with Class 2 of IS 8130, Cores

Laid up, Inner sheath of PVC applied by

extrusion, Galvanised round steel wire or

Galvanized steel formed wire (strip)

Armoured, Cores' identification by

Coloured strip applied on the cores,

Outer Sheath of PVC Compound applied

by extrusion conforming to the

requirement of type ST2 as per IS 5831 &

also meet the requirement of C2

Category tests under clause 15.1.1 &

15.2.1, Conforming To IS: 7098 Part-1

with amendment no. 1,2,3,4,5 or latest &

ISI Marked. As per SER specification No.

CEE/S/185/519/Genl. Date: 02.03.2022 or

latest. (i) Type Test Certificate

Conforming to IS:7098 Part-1 from NABL

Accredited lab has to be submitted along

with the offer for similar type of cable

having conductor cross-sectional area

not less than the mentioned size in

description. (ii) Routine test Certificate

has to be Submitted along with Supply of

materials. (iii) Acceptance test as per

IS:7098 Part-1 has to be conducted by

Inspection Agency.

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

Insulated, 1100 Volts Grade, LT Cable

with improved fire performance category

C2-FR-LSH, Stranded Aluminum

Conductor complying with Class 2 of IS

8130, Cores Laid up, Inner sheath of PVC

applied by extrusion, Galvanised round

steel wire or Galvanized steel formed

wire (strip) Armoured, Cores'

identification by Coloured strip applied

on the cores, Outer Sheath of PVC

Compound applied by extrusion

conforming to the requirement of type

ST2 as per IS 5831 & also meet the

requirement of C2 Category tests under

clause 15.1.1 & 15.2.1, Conforming To IS:

7098 Part-1 with amendment no.

1,2,3,4,5 or latest & ISI Marked.As per

SER specification No.

CEE/S/185/519/Genl. Date: 02.03.2022 or

latest. (i) Type Test Certificate

Conforming to IS:7098 Part-1 from NABL

Accredited lab has to be submitted along

with the offer and along with the supply

of material for similar type of cable

having conductor cross-sectional area

not less than the mentioned size in

description. (ii) Routine test Certificate

has to be Submitted along with Supply of

materials. (iii) Acceptance test as per

IS:7098 Part-1 has to be conducted by

Inspection Agency.t.

1100 Volts Grade, LT Cable with

improved fire performance category C2,

Stranded Aluminum Conductor

complying with Class 2 of IS 8130, Cores

Laid up, Inner sheath of PVC applied by

extrusion, Galvanised round steel wire or

Galvanized steel formed wire (strip)

Armoured, Cores' identification by

Coloured strip applied on the cores,

Outer Sheath of PVC Compound applied

by extrusion conforming to the

requirement of type ST2 as per IS 5831 &

also meet the requirement of C2

Category tests under clause 15.1.1 &

15.2.1, Conforming To IS: 7098 Part-1

with amendment no. 1,2,3,4,5 or latest &

ISI Marked.As per SER specification No.

CEE/S/185/519/Genl. Date: 02.03.2022 or

latest.(i) Type Test Certificate

Conforming to IS:7098 Part-1 from NABL

Accredited lab has to be submitted along

with the offer and along with the supply

of material for similar type of cable

having conductor cross-sectional area

not less than the mentioned size in

description.(ii) Routine test Certificate

has to be Submitted along with Supply of

materials.(iii) Acceptance test as per

IS:7098 Part-1 has to be conducted by

Inspection Agency.

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

32 32 Laying of cable / cables in under ground Metre 500.00 128.69 64345.00

along the road through cable trench etc .

as per standard drawing including

necessary termination , connection and

testing.Trenching and laying of U/G

cables in any kind of soil trench of size

minimum 0.40 mtr wide and 1 mtr deep

covered with necessary bricks for

protection of the cables including filling

of space between brick and cable/cables

with sand and refilling the trench with

excavated soil, leveling up, and restoring

the surface duly rammed.

33 33 Laying of cable / cables across the road, Metre 400.00 294.59 117836.00

track, drain etc through RCC/GI pipe

confirming to IS standard of size 100mm

or 150mm (or any suitable size as per

field requirement based on the actual

size of the cable) as per relevant

specification and as per standard

drawing with necessary termination,

connections and testing .Cost also

includes collection of cable/cables from

Railway store if required.GI pipe will be

supplied by contractor.

34 34 Laying of cable/ cables on wall / structure Metre 100.00 88.50 8850.00

through PVC casing pipe of size 4inches

or 3inches with accessories or as per site

requirement with suitable clamp / saddle/

fixtures etc with necessary termination,

connection and testing as per standard

drawing.Cost also includes collection of

cable/cables from Railway store if

35 35 Boring/Punching of underground crossing Metre 2000.00 1534.99 3069980.00

track with pipe pushing by HDD/manual

technology for crossing HT/LT power

cable below the railway track/road

including jointing of HDPE Pipe etc.

36 36 Transportation of cables in rolls with or Numbers 12.00 1012.08 12144.96

without wooden drums from the store of

concerned SSEE or any store of

kharagpur to the site of works.

commissioning of LT XLPE cable gland

made of stainless steel with aluminium

lugs/sockets (4 Nos.) suitable for

termination work of LT 4 Core X 185-300

sq. mm XLPE aluminum conductor

armoured cable.

commissioning of LT XLPE cable gland

made of stainless steel with aluminium

lugs/sockets (4 Nos.) suitable for

termination work of LT 4 Core X 120-150

sq. mm XLPE aluminum conductor

armoured cable.

commissioning of LT XLPE cable gland

made of stainless steel with aluminium

lu g s /s o c k e t s (4 Nos.) suitable for

termination work of LT 4 Core X 16-25 sq.

mm XLPE aluminum conductor armoured

40 40 Supply, transportation and fixing of RCC Numbers 50.00 512.39 25619.50

Cable Route Marker size L-12",B-6" and

H-2.6" or as per site requirement with all

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

41 41 Supply of FRIENDLY REFRIGERANT , Numbers 13.00 43900.00 570700.00

TYPE:-HIGH WALL SPLIT AC, Details

specification-BEE StarRating - 5, Type of

Air conditioner - High wall split AC,

Technology of AC - Inverter (Variable

Speed), Nominal cooling capacity in

Ton/(kcal/hr)- 1.5 Ton/4500 kcal/hr, Coil

Material- Copper, Eco-friendly refrigerant,

Minimum length of copper pipe and

suitable connecting electrical cable for

Installation and commissioning 5 meter,

warranty on Machine 1 year, Warranty on

Compressor- 10 Or higher including

42 42 Installation And Commissioning of 1.5-2 Numbers 13.00 1827.82 23761.66

Ton Split AC (including supply of

additional Copper pipe as per IS 10773 :

1995 with latest amendment or

specification issued from HQ/GRC if any

time to time, connecting copper cable,

PVC drain pipe, refrigerent, outdoor

mounting stand , nut- bolt , Refrigerant

Copper pipe of all size and all other

accessories as per site and consignee

requirement as per latest IS

specification) no extra cost will be paid

43 43 Supply of starter for split AC for 1.5ton or Numbers 13.00 682.00 8866.00

2ton of 20-25A capacity with suitable

enclosure or as per site requirement as

per IEC 60947-4-1 or with latest

amendment / any other specification if

44 44 Fixing and commissioning of starter for Numbers 13.00 68.20 886.60

split AC with suitable enclosure for

1.5ton or 2ton of 20-25A capacity or as

per site requirement.with all others

accessories and proper wiring to

45 45 Supplyof High grade superior quality Metre 250.00 128.46 32115.00

Refrigerant Copper pipe with insulation

of size 1/4 inch, as per IS 10773 : 1995 or

latest or specification issued from

HQ/GRC if any time to time, thickness

46 46 Supply of High grade superior quality Metre 250.00 450.57 112642.50

Refrigerant Copper pipe with insulation

of size 5/8 inch.as per IS 10773 : 1995 or

latest or specification issued from

HQ/GRC if any time to time, thickness

0.030 inch or as per site requirement..

47 47 Supply,fixing and commissioning of UPVC Metre 40.00 127.29 5091.60

pipe to be used for Air condition,Outer

Diameter 25.4mm or 1 inch or as per site

requirement. Length (meter) 3, Pipe

48 48 Supply,fixing and commissioning of uPVC Metre 30.00 1545.00 46350.00

Trunking (Length 2 Meters) of Size (mm):

170MM X 57MM or as per site

requirement Natural/White Casing and

Capping Trunking (with cover) For AC's

copper pipe Installation including

oupler,cover,angle,cap,flat teeetc and

other items to complete the job . Pipe As

Wrapping Tape 25mm 25mtr length

50 50 Supply,fixing and commissioning of PVC , Metre 250.00 39.99 9997.50

Aircondition drain pipe, Inner Diameter

(ID)(mm) 25 or as per site requirement.

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

51 51 Supply o f Hot dipped Galvanized wire Numbers 575.00 913.00 524975.00

mesh cable trays size: side height -min

54 mm, width - min 200mm , each cable

tray length 3 m with coupling kit and

other accessories. Support system to be

considered in every 1 m. All Accessories

including couplers , mounting

accessories (Mechanically tested &

supplied by cable tray manufacturer

must be used) are required of same

finish as per site requirement. Trays

should comply Standard EN ISO 14 61: at

least 550 h of SST.

52 52 Fixing and commissioning of Hot dipped Numbers 575.00 56.78 32648.50

Galvanized wire mesh cable trays with

coupling kit and other accessories.

53 53 Cutting platform surface at an average Metre 566.00 411.71 233027.86

depth & width of 300mmX300mm or as

per site requirement in concreate floor/

pavement on platform and re-concreting

after completion of works.

with FP 125A 36kA MCCB-01 Nos. as

incoming and FP 32A 10kA MCB 4PP

type-B - 2 Nos and SP 32A 10kA MCB 1PP

type-B - 6 Nos as outgoing with Stainless

Steel Fasteners, terminal lugs, Neutral

links, Spreader Link , Earth bar, Indicator

etc.,with proper wiring to complete

job.Thickness of DB material (in mm) 1.4

mm (MS sheet) or higher.

55 55 Fixing and Commisioning of TPN DB Set 6.00 575.29 3451.74

(Double Door) 4 way with FP 125A 36kA

MCCB-01 Nos. as incoming and FP 32A

10kA MCB 4PP type-B - 2 Nos and SP 32A

10kA MCB 1PP type-B - 6 Nos as outgoing

with Stainless Steel Fasteners, terminal

lugs, Neutral links, Spreader Link , Earth

bar, Indicator etc.,with proper wiring to

with DP 40A 10kA MCB 2PP type-B -01

Nos. as incoming including SP 16A 10kA

MCB 1PP ype-B- 10 Nos and SP 20A 10kA

MCB 1PP type-B- 4 No as outgoing with

Stainless Steel Fasteners, terminal lugs,

Neutral links, Spreader Link and Earth

bar etc.,with proper wiring to complete

job.Thickness of DB material (in mm) 1.4

mm (MS sheet) or higher.

57 57 Fixing and Commisioning of SPN DB Set 10.00 575.29 5752.90

(Double Door) 16 way with DP 40A 10kA

MCB 2PP type-B -01 Nos. as incoming

including SP 16A 10kA MCB 1PP ype-B-

10 Nos and SP 20A 10kA MCB 1PP type-

B- 4 No as outgoing with Stainless Steel

Fasteners, terminal lugs, Neutral links,

Spreader Link and Earth bar etc ,with

proper wiring to complete job.

KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

Distribution panel, consisting of

Incoming- MCCB 4P 250 A Qty -01,

Outgoing -i) MCCB 4P 100 A Qty -02, ii)

MCCB 4P 63 A Qty - 01, iii) MCB 2P 40 A

Qty -04, iv) MCB 2P 32 A Qty- 02 with

suitable TPN 250 A copper busbar,

indication lights, suitable spreder link,

contactor with all modern facilites

required for scada, volt meter, amp

meter energy meter time switches etc.

Make: ABB, L&T, Siemens. Panel should

be as per IEC 61439 or latest.

59 59 Erection, Installation and commissioning Numbers 4.00 40726.17 162904.68

of TTA make Distribution panel . including

60 60 Provision of maintenance free earthing Numbers 8.00 20751.84 166014.72

arrangement. Cost includes supply,

fixing, testing and commissioning of

maintenance free earthing with primary

MS conductor 40mm dia 3000mm long

and secondary MS Electrode 80mm dia

3000mm long including digging pit of

size 5ft x 5ft x 10ft and using earth

enhancement chemical compound

minimum 75 kg per pit suitable for 40kA

current bearing capacity complete and

conforming to IS:3043(latest) and as per

IS/IE rules and site requirement

61 61 Supply, laying, fixing and commissioning Metre 240.00 118.08 28339.20

of 25 x 5mm GI strip as and where

required extra for earth connection, at

0.5 Mtr below ground between earth

electrode and main switch/ DB/ Electric

pole etc. as per site supervisor's

instruction, including connection &

terminating with stainless steel nut, bolt,

spring, washer etc, as required. (joining

shall be done by overlapping and with 2

sets of stainless steel nut bolt & spring

kit complete as per IS, IE rules and site

62 62 Supply, testing, erection and installation Each 2.00 2581369.00 5162738.00

of DG set 250 KVA, 1500 RPM, 415 volt,

0.8 pf, liquid cooled, fuel -HSD with AMF

panel.,Generally conforming to IS:13364

(Part-2) latest.

63 63 Preparation and Submission of Drawings Each Job 2.00 11328.00 22656.00

of Wiring Lay Out, Cable Route Lay out,

Single Line Diagram of Power Distribution

System etc. related to this work. The cost

also includes supply of 11 copys of

drawing, each drawing of 10 copys

excluding traceing paper.

64 64 Supply , Installation , testing and Each Job 2.00 4519400.00 9038800.00

commissioning of Facade lighting at

Andul station with all required

Item Breakup - A-Schedule A-Schedule A-CPWD DRS-2023

Item Breakup - B-Schedule B - Description:- NS Items (Civil Engg. works)

Supply a n d fixing f u l l tou9hened glass Sqm 12mm thick unbreakable (Modi guard or similar) in window/door with revolving/siding mechanism as per direction of Engineer- in-charge o r his representative a t site with superior quality locking arrangement. T h e rate is inclusive of contractor's labour, materials, tools, plants, freight, GST and all other charges complete. KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

Providing, fitting and fixing of Teracota Sqm tile Conforming to IS-654:1992 over cement mortar of 1:4(1 cement : 4 coarse sand) in all shape and pattern including grouting of exposed joints with white cement mixed with matching colour pigment etc ay per direction of engineer- in-charge.

Wall Panelling Providing, fitting & fixing of Sqm 75mm projected panelling ,made up of 9 mm thick face ply & finished with 4.0mm thk. veneer along with support'^9 frame work made up of aluminium tubular section along with a l l h a r d w a r e s & accessories a s per requirement finished upto true l i n e & level & ready t o use condition including all material, labour, T&P etc. all complete & as per the direction o f architect. ( O n l y f a c e area measurement shall be considered for calculation)"

Providing a n d fi x i n g Z e b r a b l i n d on Sqm windows o f repted make with all labour, material, scaffolding etc complete in all respect.

Providing a n d fixing false ceiling a t all Each height including providing and fixing of f r a m e w o r k m a d e o f special sections, power pressed f r o m M . S . s h e e t s and galvanized w i t h zinc coating of 120 gms/sqm (both side inclusive) as per I S :

0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter o f ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long d r y wall screws @ 2 3 0 mm interval, including fixing of interlocking

Providing and fixing Health Faucet (KUP- Each 35041PM) 2 Way Bib cock w i t h wall flange Water J e t Spray - hand shower - ALD-573 (Health Faucet) with 8 m m Dia. 1-2 meter long flexible Fiexible Tube & wall Hook.

Providing and fixing Toilet Roll Holder Each (ACN-1153S) with stainless Steel Flap.

Providing and fixing Soap Dish Holder Each (ACN-11535

P r o v i d i n g a n d fi x i n g B a s i n faucet Each Concrete Part (ALD- 441) regular body of single concealed s t o p cock (composite one piece body) with cartridge, exposed part (KUP-35441KPM) Exposed part Kit of single conlealed stop cock consisting of operating l e v e r , cartridge sleeve wall fl a n g e ( w i t h s e a l s ) & b a s i n spout (compatible with ALD- 441)

Providing a n d fi x i n g To w e l R i n g (ACN- Each 1121BN) round with round flange.

Providing and fixing double Arm wall Each mounted reversible plain/ Magnifying (X3) pivotal mirror (ACN-1193N).

"Providing and fixing walI mounted E\/\/C Each (A RC-EST- 39953BIUFSM) rimless wall hung WC with soft close seat cover. Hinges Accessories set of size 345x490x360mm (As per rate KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

""Providing and fixing curved shaped Each urinal partition with frosted glass 8mm/ 10mm (1810 UC/ 1110UC) (As per rate analysis)."

'Providing and fixing Soap dispensor with Each giass bottle (ACN-1135N) (As per rate analysis)."

Providing and fixing table top white wash Each basin with basin mixure and all other necessary fittings and fixtures complete assembly of "JAQUAR" make including cutting, drilling threading etc. and " making good the same wherever required.

Providing and fixing 8" dia. over" head Each shower with 16" long arm concealed body divert-or and divert -or par kit with all others necessary fitting and fixtures complete assembly of "JAQUAR" make including cutting , drilling, threading etc. as required and making good the same wherever required.

Providing and fixing hand shower with Each flexible tube and bracket and all other necessary fittings and fixtures complete assembly of "JAQUAR" make including cutting , drilling, threading etc. as required and making good the same wherever required.

Providing and fixing spout with all other Each necessary fittings and fixtures complete assembly o f "JAQUAR" make including cutting bending a n d making g o o d the same wherever required.

Providing a n d fixing 24"long towel rack Each w i t h a l l other necessary fittings and fixtures complete assembly of "JAQUAR" make including cutting, drilling, threading etc. and making good the same wherever required.

Providing and fixing corner shelf with all Each necessary fittings and fixtures complete assembly of "JAQUAR" make including c u t t i n g and making g o o d t h e same wherever required.

Providing a n d fixing s o a p d i s h w i t h all Each necessary fittings and fixtures complete assembly of "JAQUAR" make including cutting drilling, threading etc. and making good the same wherever required.

Providing and fixing soap dispenser with Each glass body 8 with all necessary fittings and fixtures complete assembly of "JAQUAR" make including cutting and m a k i n g gopd the same wherever required.

Providing and flxing white commode with Each a l l necessary fittings and fixtures complete assembly o f "JAQLIAR" make including cutting in wall and floor and making good the same wherever required. KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

Providing and fixing floor mounted couple Each white closet with P-trap ( European type) w i t h a l l necessary fittings and fixtures complete assembly of "PARRYWARE" make including cutting drilling, threading etc. on wall nd floor and making good the same wherever required.

Providing a n d fi x i n g Av o n w a s h basin Each w h i t e w i t h all necessary fittings and fi x t u r e s c o m p l e t e a s s e m b l y of "PARRYWARE" make including cutting drilling, threading etc. on wall and floor and making g o o d t h e same wherever required.

Providing a n d fi x i n g w a l l m i x e r Non- Each telephonic shower with all necessary fittings and fixtures complete assembly of "ESSCO" make including cutting drilling, threading etc. as required and making good t h e s a m e wherever required.

Providing and fixing bib cock short body Sqm w i t h a l l other necessary fittings and fixtures complete assembly of "ESSCO" make including cutting ,threading etc.and making good the same wherever required.

Providing and fixing200x200mm baffle Sqm ceiling(200mm Width & 200mmHeight) system comprisingof closed box shapedprofiles-Metal baffle shall bemade out of 0.7-0.9 mmthick electro galvanized steelmaterial in lengths of up to2400mm. The Coil should bestove enameled on acontinuous application forpre-treatment. The coils togo through 4 stages ofpretreatment, three timesoven baked throughconversion coating, primingand finish coat ensuringsuperior adhesion, highcorrosion resistance andgood colour stability. Thecoils to be painted on bothsides after degreasing.Inside surface to have aprimer of 5 microns and acoat of natural colour of 5microns, exposed surface tohave a primer of 5 microns,binder Of 5 microns andtopcoat of approved colourof 15 microns. Baffle Ceilingshall be mounted on slottedgalvanized steel grid profileof minimum 2mm thicknessin a module of 225mm. Baffle grid shall besuspended and supported bymeans of minimum 6mm diathreaded suspenders at adistance of 150mm from theedge and 1200mmmaximum spacing. Bafflefixing brackets shall be usedto keep the ceiling in correctplace for the levellingpurpose. Metal baffles shallbe coil coated in desiredcolour,Baffle ceiling systemshall be installed incompliances withmanufactures technicalinstallation brochure andmanual. At accessories likeend caps, column rings etcare included wherever reuired. KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

Providing, Ornamental GFRC work including cornice/capital/ Jalli/Pannels etc, as per approved drawings & having water resistant, anti-fungus & anti-bacterial properties including fixing on/between RCC /Brick work/ SS work Column or structural work with Dry Fixing method, using fasteners, and necessary hardware etc. The element shall be made from '43 grade' Portland Cement make Birla/ 'JK Cement or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass fibre make 'Owens Coming' or equivalent, Super plasticizers/Additives make by 'BASF or equivalent, Polymers make 'BASF' or equivalent and UV resistant Synthetic inorganic pigments shall be used for pigmentation make 'BAYFERROX (Germany) or equivalent. The material casting shall take place in Synthetic Rubber/FRP Mould manufactured by Mould/ Tool /Mould Grade Resin of Revex/ 'Reckli' or equivalent. The cost shall be inclusive of all material, labour, royalities etc. as required to Install all the GFRC items complete as per direction of Engineer-in-Charge / Architect. (Thickness of 25+/-5mm & Border thickness of 50-60mm) & Panel (Thckness of 25+/-5mm). (Cost of Supporting Framework will be Extra).

Supplying, providing and fixing PVC Sqm louvers of approximate size of 9.5 feet in length X 5 to 10 inches in width and 10- 12mm thickness in wall panelling using adhesive and making proper alignment as per direction of interior designer and approved by Engineer-in-Charge. PVC louvers should have features like waterproofness, durability anti- fungus/termite protection. The rate includes cost of all labour, material, transportaton, lead, lift, taxes etc. complete. Total 16682722.70 Schedule C-Electrical work Construction of new station building under ABSS at Andul & Uluberia.