Providing Internal and External electrification to the Block 1 Building (Conference Hall, Sports Equipment Room and Gallery above) for Integrated Sports Complex at Thoppampatti in Dindigul District

Amount

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End).

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End.

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of single box type 20W LED fitting with CRCA body complete with 20W LED tube light with TW round blocks on wall or ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with necessary connection.

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod on the existing fan clamp.

Wiring with 2 x1.5 sq.mm. PVC insulated SC unsheathed FRLS CU. Conductors of 1100 V grade insuitable PVC rigid pipe concealed in wall and carring with PVC accessories with mdoule GI swtich box in fluck with module front plate with continuous earth wire connection of 1.5 sq.mm cu. wire and making good of the concealed portion with suitable colour for concealed PVC light point, fan point (for electronic regulator) (5pts / coil (Higher End) (for street light point.

Supply and run of 1.5 sq.mm PVC insulated SC unsheathed FRLS copper, conductor of 1100V grade in existing PVC concealed pipe.

Supply and fixing of batten holder (bakelite) with 9 W LED lamp.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.

Supply and fixing of 300mm (12inch) sweep (light duty) AC exhaust fan complete without provision of hole in the wall.

Supply and fixing of louvers shuters arrangements for 300mm (12inch) sweep (light duty) AC exhaust fan.

Supply and fixing of 375 mm (15") sweep light duty AC exhaust fan complete without provision of holes in the wall.

Supply and fixing of louvers shutters arrangements for 375 mm (15") sweep light duty AC Exhaust fan.

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End.

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End.

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End.

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug inflush with wall with earth connection (For AC Plug).

Supply erection, testing and commissioning of 2.0 TR (6000 K.cal/Hr) ABS Plastic Split type Air conditioner conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with rotary compressor operating on non CFC refrigerant suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with star rating of 3 star as per BEE specification and capable of performing the functions of Cooling, Dehumidifying, Air Circulating, Filtering The installation works for the above split type AC units includes the following. 1.Mounting / Fitting Indoor and outdoor units at their respective locations. 2. Laying refrigerant pipeline of required length connecting both units after drilling hole/holes in the wall if required. Thickness of copper tubing shall not be less than 0.8mm.

3. Insulating the suction pipe with expanded polyethylene foam 5mm tubing. 4. Laying 25mm dia flexible PVC drain pipe to throw out the condensate water being formed within the indoor unit.5. Leakage testing the entire system unit. 6. Charging refrigerant gas in the unit. 7. Suitable electric wiring to be provided with 2.5 Sq.mm PVC insulated copper wire between indoor and outdoor units up to 6 Mtrs length and up to switch within 3 Meters of location of indoor unit (Carrier/Voltas/O General).

Supply and installation of 5 KVA Electronic Automatic Voltage Stabilizer with Input Voltage range of 150Volt – 285 Volt and Output Voltage range 200Volts to 230 Volts with High and Low Voltage cut off and 3 minutes time delay relay with demonstration. (V Guard / Eq)

Supply and fixing of MS stand for fixing outdoor unit.

Supply and laying of 5/8" and 3/8" copper refrigerant pipe of 0.8mm thick with 2.5 sqmm 3 core chord between indoor and outdoor unit. (Extra beyond 3 mts /AC unit)

Supply and fixing of 32A DP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. [The MCB and metal enclosure should be of Higher End.

Supply and fixing of 32A FP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. [The MCB and metal enclosure should be Higher End).

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.

Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 4P MCB as incoming and 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.

Supply, fabrication, erection and commissioning of 100A capacity dust and vermin proof cubical panel board of suitable size of made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and separations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with 1"x1/8" tinned cu. Flat for 3 phases and nutral and 2 Nos of 1"x1/8"

tinned cu flat for earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches : 1"x1/8" tinned cu. Flat for interconnection of 1 no100A incoming switch to bus bar, No.8 SWG rigid copper for 6 Nos 63A outgoing Switches to busbar. A separate chamber on top of one side should be provided with multifunction motor to display line & phase voltage, phase current, power factor and frequency with one set of LED pilot lamp, fuse holder with suitable HRC fuse for each phase with suitable CT coil arrangements. The panel should be fabricated as per relevant CEIG specifications for housing 7Nos 3 phase switches and supply and fixing of the following switches.

1. 100 A TPN switch disconnector fuse units interior only with HRC fuses double break-1No 2. 63A TPN switch disconnector fuse units interior only with HRC fuses double break- 6 Nos. In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylam separators and properly earthed by tinned solid copper flat as per CEIG specification. The earth bus with two runs of 1" x 1/8" tinned copper flat must be run all around the panel to provide double earth connection. The panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and metallic damber board affixed complete with mounting on base channel of 3"x1-1/2"x1/2" iron frame work support complete. [The TPN switches shoul be L&T/Siemens make only]

Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion.

Supply and laying of 3 ½ x 70 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 3 1/2 x 70 sq.mm PVC LTUG armoured cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3 1/2 x 70 sq.mm PVC armoured LTUG cable, with earth connection.

Supply and providing cable end termination of 3 ½ x 70 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Earthing as per PWD standard with an earth electrode of 2Mtr Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour.

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured cable on post or on wall with MS Clamps.

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured postion cable in suitable GI (Class'B') pipe on wall with MS Clamps.

Supply and fixing of brass cable gland for 4 x 10 sq.mm PVC armoured LTUG cable, with earth connection.

Supply and fixng of TNEB Meter Board suitable for 3 Phases 100A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1 1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 100A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16sqm PVC insulated copper wire with 1 No. 100A 30mA four pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete.

Supply and fixing of 3 Phase 100A aerial fuse unit for 3 Nos 100A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps.

BHARATHI ENGINEERING AND ELECTRICAL CONTRACTORS (BID ID -1272715)

A.BALAKRISHNAN (BID ID -1272720)