SPECIAL REPAIRS REPLACEMENT OF FURNITURE AGAINST CONDEMNATION AT INS SHIVAJI LONAVLA

Amount

Almirah med steel with shelves FD No. FD- 1032 :- Overall size shall be all as shown on drawing. It shall be made of 20 gauge thick mild steel sheet. The almirah shall have three shelves. The almirah shall have one normal handle 120 mm long having three way locking system with proper workmanship. All joints and welding, fixing shall be done according standard workmanship.. Finish & Paint :- All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Almirah large steel 1/2 Hx1/2 S FD No. FD - 1033:- Overall size shall be all as shown on drawing. It shall be made of 20 gauge thick mild steel sheet. The almirah shall have one normal handle 120 mm long having three way locking system with proper workmanship. A hanging rod be provided with 20mmdia chormium plated steel conduit pipe of wall thickness 1.25mm and shall have sockets at both ends.All joints and welding, fixing shall be done according standard workmanship. Finish & Paint :- All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Chair dining FD No. FD/ MAP-ll/04:-Overall size shall be all as shown on drg.All wood shall be first class teak wood.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg.75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm..Four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. Rest all as per drgs and as directed by Engr-in-Charge.

Chair dining FD No. FD-279 :- overall size shall be all as shown on drg.All wood shall be first class teak wood. The cane shall be 2 mm wide 0.4 mm thick half round and woven in godrej pattern. Hard rubber/PVC shoe shall be fixed to the bottom of all legs as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. Rest all as per drgs and as directed by Engr-in-Charge.

Chair easy FD No. FD-229 :- overall size shall be all as shown on drg.All wood shall be first class teak wood. The cane shall be 2 mm wide 0.4 mm thick half round and woven in godrej pattern. Hard rubber/PVC shoe shall be fixed to the bottom of all legs as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. Rest all as per drgs and as directed by Engr-in-Charge.

Chair writing FD No. FD-280 :-overall size shall be all as shown on drg.All wood shall be first class teak wood. The cane shall be 2 mm wide 0.4 mm thick half round and woven in godrej pattern. Hard rubber/PVC shoe shall be fixed to the bottom of all legs as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. Rest all as per drgs and as directed by Engr-in-Charge.

Chair verandah FD No. FD -259 :- Overall size shall be on all as shown drg.Frame shall be 20 mm dia MS conduit of wall thickness 1.6 mm made to shape as shown on drg. 3mm thick flat iron plate shall be welded at the bottom of all legs. Caning shall be done with 4mm wide cane in mat pattern or as directed by Engineer-in-charge in the seat, back and hand rest portion. PVC/hard rubber shoes shall be provided to the bottom of all legs. All joints and welding, fixing shall be done according standard workmanship. Finish & Paint : All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Chair computer FD No. FD/E6/MAP/01 :-Overall size shall be all as shown on drawing.Push back revolving chair, height adjustable, nylon wheel, base metal assembly required. The product requires basic assembly. Chair shall be comfortable revolving with an absolute executive look. 360 Degree smooth swivel movement. Padded seat as well as the back with comfortable arm rest.The cushion shall be of size 50 mm and of 50 density with covered best quality tapestry cloth as approved by GE.Rest all as per drg and as directed by Engr-in-charge.

Chair school with hand boardFD No. FD/E6/MAP/05 :- Overall size shall be all as shown on drg. 25mm dia 16 Gauge MS tube shall be provided for steel frame. One piece PVC seat & back shall be provided as per drg and approved by GE. PVC/hard rubber toes shall be provided to the bottom of all legs. All joints and welding, fixing shall be done according standard workmanship.Rest all as shown on drg. Finish & Paint : All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Table bedsideFD No. FD/E6/MAP/15 (R) :- Overall size shall be all as shown on drg.The entire frame of table bed side shall be made up of MS square pipe 18 gauge duly black powder coated. The two sides and top shall be of 18 mm thick ISI marked 303 BWR grade plywood shall be laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE) and 4 mm thick half round teak wood beading without joints shall be provided. The Back of the table as shown in drg shall be provided with 6mm ISI marked 303 BWR grade plywood duly screwed to frame. The two sides, back and bottom of drawers of the table shall be made up of 12mm thick ISI marked 303 BWR grade plywood as shown on drg, except the front side which shall be of 18 mm thick ISI marked 303 BWR grade plywood shall be laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE) .The drawers shall be made functional on telescopic channel as directed.The drawers of the table shall be provided with 100mm long CP handles.L-shape SS corner bracket brace support 30x30 mm to be provided. Additional Front , back and side stiffners of MS square pipe (18 Gauge) duly black powder coated at 50 mm high from ground to be provided as directed by Engr-in-Charge.PVC/hard rubber toes shall be provided to the bottom of all legs. Rest all as per drg. Finish & Paint : All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Side board FD No. FD-1112 :-Overall size shall be all as shown on drg. 18 mm thick ISI mark 303 grade plywood, laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE) shall be provided at top, Sides shall be 450mm wide and 675mm high18 mm thick ISI mark 303 grade plywood, laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE). Four drawers shall be provided equally in this space and telescopic channel to be provided to each drawer as directed by Engr-in-charge. The shutters shall be of 18 mm thick ISI mark 303 grade plywood, laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE) . 4 mm thick half round TW beading without joint shall be provided alround the front shutters and front of shelves. All drawers and shutters shall be provided with one handle each of powder coated mild steel and 100mm long. In addition wooden base frame to be provided with 925 mm long rail of size 25x40 mm both sides, 300 mm short rail of size 25x40 mm both side and 45x45 mm legs to each coners at 75 mm height as directed by Engr-in-charge. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. Rest all as per drgs and as directed by Engr-in-Charge.

Book case FD No. FD-355:- Overall size shall be all as shown on drg.All wood shall be first class teak wood.The sides,shelves, top,bottom of the book case shall be made up of 18/19 mm thick prelaminated BSL MDF board exterior grade of mahogany shade (3024-SD in action tesa or equivlent).The back shall be of 6 mm thick commercial plywood BWR grade. The base shall be provided at height of 100 mm from ground. Rest all as per drg. Polish & Finish:-All wood surface exposed to view when placed in position shall be Melamine polished with high gloss finish. Rest all as per drgs and as directed by Engr-in-Charge.

Table dressing ladies with mirror FD No. FD/E6/MAP-ll/07:- Overall size shall be all as shown on drg.The sides, top ,back and front of the base shall be of 18 mm thick ISI mark 303 grade plywood shall be laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE). All edges after post form shall be sealed with 2 mm PVC beading. Drawers shall be of 12mm thick ISI mark 303 grade plywood shall be laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE).Bottom of the drawers shall be of 6mm thick commercial BWR grade plywood shall be laminated with 0.4 mm sunmica sheet (Colour and shade as approved by GE) whereas the front of the drawers shall be of 18 mm thick ISI mark 303 grade plywood shall be laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE).The drawers shall be made functional on telescopic channel as directed. The drawers of the table shall be provided with 100mm long CP handles.L-shape SS corner bracket brace support 30x30 mm to be provided. 5mm thick electro copper plated mirror (Make: Modigaurd/ Swastik/Saint gobin) shall be fixed over 6mm thick BWR grade plywood back. The plywood shall be fixed on two vertical hardwood member of size 45mmx35mm .A horizontal support of size 30mmx20mm shall be provided in between two vertical members. The Overall size of the stool shall be 440mm long 350mm wide and 425mm high. The four sides shall be of 18 mm thick ISI mark 303 grade plywood shall be laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE).The top of the stool shall be of 12mm thick BWR plywood openable as shown in drg.Four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20mmx20mm.The seat of the stool shall be 75mm high ,made of foam 40 density covered with tapestry cloth as approved by GE.Rest all as per drg. Polish & Finish:-All wood surface exposed to view when placed in position shall be Melamine polished with high gloss finish. Rest all as per drgs and as directed by Engr-in-Charge.

Table dressing gents with mirror FD No. FD-320:- The frame of mirror shall be overall size of 410 mm wide and 1020 mm height, with teakwood vertical support out of 45 mm x 45mm shall be provided at the back of mirror. 25x19 mm teakwood frame shall be provided all around of mirror. The entire box shall be made of 12mm thick ISI mark 303 grade plywood shall be laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE) . Bottom of the drawers shall be of 6mm thick commercial BWR grade plywood shall be laminated with 0.4 mm sunmica sheet (Colour and shade as approved by GE) .The bach shall be of 6mm thick commercial BWR grade plywood. 5 mm thick mirror Polish & Finish:-All wood surface exposed to view when placed in position shall be Melamine polished with high gloss finish. Rest all as per drgs and as directed by Engr-in-Charge.

Table writing FD No. FD-275 :-Overall size shall be all as shown on drg. All wood shall be first class MP teak.410 mm two Nos long rail of size 25x50 mm to be provided under the top as directed by Engr-in-charge.The top shall be of 18 mm thick ISI mark 303 grade plywood shall be laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided all round the top of table.Drawer shall be made functional on telescopic channel and L-shape SS corner bracket brace support 30x30 mm to be provided as directed by Engr-in-charge.Shutter shall be provided with magnetic catcher..In addition 210 mm long centre sfiffner of size 25x50 mm to be provided under the top as directed by Engr-in-charge. Hard rubber/PVC shoe shall be fixed to the bottom of all legs as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. Rest all as per drgs and as directed by Engr-in-Charge.

Table peg FD No. FD-384 :- Overall size shall be all as shown on drg.All wood shall be first class MP teak.The top shall be of 18 mm thick ISI mark 303 grade plywood shall be laminated with 0.7 mm sunmica sheet (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided all round the top of table.280 mm long of two Nos short rails of size 20x40 mm to be provided at top and centre rail of size 20x50 mm shall also be provided lengthwise at centre in between the side bottom rails as directed by Engr-in-charge. Hard rubber/PVC shoe shall be fixed to the bottom of all legs as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. Rest all as per drgs and as directed by Engr-in-Charge.

Locker bedside steelFD No. FD-1029 :- Overall size shall be all as shown on drawing. Locker shall be made of mild steel sheet of 20 gauge. 20 mm dia conduit pipe shall be chrome plated with wall thickness of 1.6 mm shall be fixed with side sockets.One chromium plated steel handle of size 120mm long and not less than 50 mm wide with duplicate keys shall be provided. The locking device shall be a three way locking device with proper workmanship. All joints and welding, fixing shall be done according standard workmanship. Finish & Paint :- All steel surfaces exposed to view when placed in position shall be powder coated in dual shade (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

agarwal and company (BID ID -3081343)

M/s National Traders (BID ID -3081783)

Mahesh Traders (BID ID -3077100)

Apsara Industries (BID ID -3081608)

swastik industries (BID ID -3082387)