Interior fit out work at the office space of TRAI at 4th, 5th, 6th and 7th floors of Tower F, World Trade Centre, Nauroji Nagar, New Delhi

Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cum 395.85 6326.05 2504166.89

Providing and laying machine cut, mirror polished, Italian Marble brass brass inlay stone flooring laid in required pattern in linear portion of the

building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1

11.51 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment

1.02 to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab in all colour and shade Sqm 450.00 6095.50 2742975.00

ENGINEERED WOODEN FLOORING Panel 1820 x 145 Total thickness 14 mm Numbers of panels per pack 6 Nested Lengths Max. 1 plank out

of 6 m2 per pack 1,583 m2 Kg per pack 11,99 kg Toplayer PEFC controlled sources EN 13489 ± 3 mm Core board PEFC controlled sources

Spruce Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and groove Length Uniclic Width Uniclic Multifit Domestic use

Conditions in each pack 33 years Uniclic - Multifit connection Lifetime Commercial On request "Wood for Life" Edge Protect + Provides a warranty

on build-up of residue dirt along the edges due to maintenance over the years 10 years "Wood for Life" Surface & Edge Protect + (lacquered

products only) Provides a warranty on pollution of surface structure and a warranty on build-up residue dirt along the edges due to maintenance

1.03 M.R. over the years 10 years Surface layer Wood species Oak Origin Europe Finishing UV cured Oiled finish 2 layers UV cured Lacquer Anti-scratch Sqm 1742.50 6470.00 11273975.00

top coat 5 - 7 layers Natural variance Due to nature, visual surface can deviate from samples Surface treatments cf catalogue/website Nature

Marquant Vibrant General aspect of installed EN 13489 Lipping - difference in height (mm) ≤ 0,20 difference in width (mm) ≤ 0,20 cupping

lengthwise % ≤ 0,1 cupping in width % ≤ 0,2 Dimensional stability ISO 24339 Cupping short side max % ≤ 0,30 Changes 30 - 85 % RH Cupping

short side min % ≥ - 0,20 Open joints short side (mm) ≤ 0,20 Open joints long side (mm) ≤ 0,30 Underfloor heating Suitable of special installation

instructions.or its equivalent as per direction of Engineer Incharge

Providing & fixing of PANELS in patented round hole profile of size 146mm x 25mm x 3000mm (Min) or equivalent as per site requirement aand

direction of EIC. Terra DECKING are hybrid composites with a wood plastic composite core made of 65% wood fiber, 30% High Density

Polyethylene and 5% Additives and 360 degree capping of high performance polymer compound for high UV resistance and vibrant aesthetics

1.04 MR produced using co extrusion process.The Cladding panels should adhere to accelerated weather testing as per ASTM G154:2016,Cycle-1, Density Sqm 318.00 4976.00 1582368.00

of 1.3g/cum & tensile strength >22Mpa . The panel should be compatible with no visible screw installation system using Novel Terra Powder

coated Steel Clips. its equivalent as per direction of Engineer Incharge

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20mmx20mmx4mm in all colour, design, fixing in customize design

as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the

1.05 11.53 rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in- Sqm 75.00 3282.50 246187.50

Supplying, installation, testing and commissioning of rubberised flooring, 20mm thick with box preparation, adhesive, installation, suitable for

1.06 MR gymnasium flooring complete in all respects Sqm 26.00 2734.00 71084.00

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and

11.41 conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1: 4 (1 cement : 4 coarse sand), jointing

1.07 with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Providing and fixing removable raised/false access flooring with systemand its components of approved make for different plenum height with

possible height adjustment upto 50 mm, comprising of modular loadbearing floor panels supported on G.I. rectangular stinger frame workand G.I.

Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer

diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size

75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment

upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through

base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both ends for

securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by

11.54 the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the

1.08 system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete

as per the architectural drawings, as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade

(FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The

top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20

welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate

is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory

finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within

0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel

which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of

50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed

on the side of the panel to ensure the quality of the product.

11.54.2 450 mm Finished Floor Height (FFH). Sqm 94.00 5407.15 508272.10

Supply of 100 mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thichness 1.30 to 1.50 mm. Designed to conceal

1.09 MR screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket. Metre 1500.00 286.00 429000.00

Providing Recycled PET Carpet Tiles / Planks 250mm x 1000 mm or euivalent Planks having density 6000 - 6200 and Tufting Weight of 20 Oz /

680 GSM. Carpet should be 100% made of Recycled PET Fibre and construction face carpet tile with fiber glass polyvinyl chloride backing. .

1.10 MR The Plank should have a total thickness of 6mm and Pile Height should be 4mm The laying work should be carried out by the authorized installer Sqm 855.00 3153.00 2695815.00

of the Company in India. as per site requirement and direction of Engineer Incharge

Providing and laying Carpet tiles of Yarn type Eco Solution Q® Nylon (Nylon 6) only; Multi-Level Pattern Loop, manufactured using 100% solution

dyeing process, Tiles of size 23cms x 91cms or equivalent as per direction of EIC and site requirement with SSP® Soil Protection treatment ™ or

equivalent containing properties of Stain Repel, with Ecoworx® Tile- 100% PVC Free/ 100% Bitumen Free/ 100% Recyclable - backing system

with recycled content, made from thermoplastic polyolefin compound with reinforcing layer high-performance environments requiring modular

flooring, having tufted yarn weight of 542.5 gsm/sqm and average yarn density of Minimum 9143 oz/cu. yd. or more, Nominal total thickness 5.42

1.11 MR mm minimum, Radiant Panel class 1 rated (ASTM E648), NBS smoke < 450, Pill test -Passed, Anti Static Property less Than 3.5 kv, Texture Sqm 414.00 3682.00 1524348.00

Appearance Retention Rating of 3.5 for Severe Use, Anti Microbial Treatment-Passes (AATCC-174). CRI Green Label Plus is certified for indoor

air quality, including fixing/ installation with Low/ Zero VOC content Adhesive. Impact Sound (ISO 10140-3) 20 dB & Sound absorption (ISO 354)

0.2 Class D.or equilent as per direction of EIC and site requirement

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Providing and laying Carpet tiles of Yarn type Eco Solution Q® Nylon (Nylon 6) only; Multi-Level Pattern Loop, manufactured using 100% solution

dyeing process, Tiles of size 61cms x 61cms equivalent as per direction of EIC and site requirement with SSP® Soil Protection treatment ™ or

equivalent containing properties of Stain Repel, with Ecoworx® Tile- 100% PVC Free/ 100% Bitumen Free/ 100% Recyclable - backing system

with recycled content, made from thermoplastic polyolefin compound with reinforcing layer high-performance environments requiring modular

flooring, having tufted yarn weight of 542.5 gsm/sqm and average yarn density of Minimum 6128 oz/cu. yd. or more, Nominal total thickness 5.84

1.12 MR mm minimum, Radiant Panel class 1rated ( ASTM E648), NBS smoke < 450, Pill test -Passed, Anti Static Property less Than 3.5 kv, Texture Sqm 688.50 3394.00 2336769.00

Appearance Retention Rating of 3.5 for Severe Use, Anti Microbial Treatment-Passes (AATCC-174). CRI Green Label Plus is certified for indoor

air quality, including fixing/ installation with Low/ Zero VOC content Adhesive. Impact Sound (ISO 10140-3) 20 dB & Sound absorption (ISO 354)

0.2 Class D or equilent as per direction of EIC and site requirement

TOTAL FLOORING WORKS 8679069.99 19913359.00

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

2 FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x

50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required

size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to

centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.

12.45 wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of

2.01 ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and

finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's

specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) Sqm 2328.30 1145.95 2668115.39

BAFFLE CEILING: Providing & Installation of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm Height) or equivalent

as per site requirement and direction of EIC U Shape panels in RAL color finish. Panels shall be made of 0.5 mm thick galvanized steel after

Powder-coated and length up to 4000 mm. Panel shall be high corrosion resistance and good color stability. Centre to Centre panel gap will be

150 mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold

2.02 MR the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod Sqm 300.00 4245.00 1273500.00

hanger with special height adjustment suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and

nylon inserts. Panels are factory cut in lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to

cover the edges of the panels. or equivalent as per direction of EIC and site requirement

Providing and fixing GI Plain 75mm wide x15mm deep panel or equivalent as per site requirement and direction of EIC upto 6mtr, shall be roll

formed out of 0.5mm thick Powder Coated .The top coat of panel shall be 60 micron polyester coated finish in approved colour. The panel shall be

factory cut in up to 6Mtr OR required length. Accessories Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black

2.03 MR paint having cut out to hold on panel in a module of 75mm closed. The joint of two carriers shall be joined by means of carrier splices maintaining Sqm 20.00 4663.00 93260.00

a module of 75mm .4mm dia galvanized rod with special height adjustment butter fly clips made out of SS steel sheet. The edge profile G.I.shall

be matching with the panel or equivalent as per direction of EIC and site requirement

CUSTOMISED PERFORATED MESH FASLE CEILING: Supply & Install: Loop Type 2 system formed as an open metal ceiling with an open area

of more than 50% and to the flare [5mm] of the perforation pattern [RV-50-40] the ceiling has a three-dimensional visual effect and hides the insight

into the plenum. Bypassing the perforation, the S-shaped sides of the LOOP interlock both the long and front side joint with a non magnetic

suspension, the elements are installed with a circumferential 1 mm joint, thus compensating tolerances in x and y direction. The non-magnetic

suspension system effectuates a self-alignment of the elements [puzzle effect]. The module size 966x1115x1.0mm or equivalent as per site

requirement and direction of EIC, GMS is perforated with 60mm deep drawn holes .The substructure consists of a form perforated L profile

[U1040] as a lateral grid which is suspended from the ceiling with nonius adjustable upper and lower parts or with threaded rods using official

2.04 MR approved dowel plugs. The grid profiles are to be connected together at the ends by means of longitudinal connectors [U 1041] [screw fasteners]. Sqm 154.00 5253.00 808962.00

The spacing of the grid profile is according to the requirements of DIN EN 13964. On profiles angles, C-band raster as secondary profiles are

bolted on by means of C channel hanger bracket with M6 bolts. Only construction parts approved by the manufacturer may be used. Provide

necessary supports, provisions as per the architects Instructions. Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO

9001:2008 approved by TUV.Finish of ceiling is in RAL 9016 white/ RAL 9006 Silver grey powder coated with minimum 60 microns paint thickness

or equivalent as per direction of EIC and site requirement

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Providing & Fixing of Fibre Glass Acoustical Suspended Ceiling System with 20/25mm thick Optra Microlook 90 Edge Tiles with Silhouette 15mm

face exposed grid. . The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95 (Average value of

Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, , Light Reflectance ≥88% as per

ASTM E-1477, Colour Pebble White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 20/25mm Square Tegular/Microlook 90˚ edge and

8mm drop in module size of 300 x 1200mm. It shall be suitable for Green Building application, with Recycled content of 85%.SUSPENSION: The

tile shall be laid on grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour with mitred ends & “bird’s mouth”

notches to provide mitred cruciform junctions colour global white. Grid shall have double stroke rotary stitching on all T sections i.e. the Main

Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 7.9 kg/m2 (as per

standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading

of 9.5 kg/m. The end details of the cross tee shall be made of pre hardened steel clip fixed to the ends of the cross tee to provide double locking

between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a

pull out strength of more than 100kg. The T Sections shall be made of 90 gsm as per IS 277 (2003) pre-painted steel with baked polyester paint of

2.05 MR 0T bending capability. INSTALLATION: INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using sq m 963.00 3540.00 3409020.00

suspension system (specifications below) at 1200mm maximum. The First/Last suspension system at the end of each main runner shall not be

greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting

1200mm long cross tees to be interlocked between main runners at 1200mm to form 1200 x 1200 mm module. Cut cross tees longer than 600mm

require independent support. 1200 x 300mm module to be formed by fitting 1200mm long flush fitting cross tees (with no mitre cut on cross tees)

centrally between the 1200 mm cross tees(Miter cut at every 300 mm). Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls

using screws at 450mm centre to centre maximum. Installation shall be carried out as per Manufacturer recommended procedure. SUSPENSION

SYSTEM accessories supplied by Manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre- straightened hanger wire of dia – 2.5

mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips

made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment

during installation purpose in main runners) or equivalent as per direction of EIC and site requirement

Providing & fixing of planks - 600mmx1200mmx25mm thickness or equivalent as per site requirement and direction of EIC made out of wood

wool fibre of width 1 mm thickness mixed with white portland cementwith 5mm CNC groove as per architects design. TOTAL CONSTUCTION

height of 200mm minimum from the true slab. Panels to be fixed on framework made out GI (0.60mm thick & 60 MM Width) sections to form a

section of 600mmx600mm. Celenit panels to be fixed on the Slabs using UNIVERSAL BRACKET with a minimum of 50mm to 100mm void or gap

with Galvanized screws of length 50 mm & Dia 4.5 mm. Mineral Wool of density 50 kgm3 density (30mm thick) to be back filled.Thermal and

2.07 MR acoustic insulation board, consisting of mineralized extra-thin fir wood wool bound with white Portland cement. Wood wool is 1 mm wide. High sq m 75.00 4677.00 350775.00

quality boards for design acoustic absorption systems.It complies with EN 13168 and EN 13964.The boards are certified by ANAB-ICEA and

natureplus for eco-compatibility of materials and manufacturing process. CELENIT ABE is PEFC™ certified. Also available with FSC®

certificationSound absorption value NRC : upto 0.90. Reaction to fire acc. to EN 13501-1: B-s1, d0. EC Conformity Certificate Reg. No.: K1-0751-

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Providing and fixing horizontal level Open cell GI lay-in ceiling tiles with border panels forming board edge of size 600x600x38mm (Nominal)

having cell size of 200x200mm made of 120 gsm galvanized steel as per IS 277 (2003) suitable for architectural finishes in 0.35mm thickness as

per in IS:513 (1994) in Global white color. To create triangle, a diagonal component of length 265.40mm & height of 14.30mm should be fitted

within 200x200mm open cell. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness

ranging from 60-80 microns. The powder coating shall pass Salt Spray Test for 750 hours as per ASTM B117, QUV –A Test for 1000 hours as per

ASTM G-154 – (Cycle – 1) and Humidity test for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO

2409. The shade variation across batches shall be delta E<1 using Excite/BYK Gardner instrument and gloss level of 25±5% at 60˚ as per ASTM

D523. Tile shall have a Fire Performance class A1 as per EN-13964. SUSPENSION: The tile shall be laid on manufacturer’s Suprafine 38 with 15

mm wide T - section flanges colour global white (matching to tile colour) having double stroke rotary stitching on all T sections i.e., the Main

Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as

per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection

loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel clip fixed to the ends of the cross tee to provide double

locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall

have a pull-out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel 90 gsm and pre-painted steel with baked

polyester paint of 0T bending capability INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using

2.08 MR Knauf suspension system (specifications below) at 1200mm maximum. The First/Last manufacturer’s suspension system at the end of each main sq m 928.80 4245.00 3942756.00

runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the

Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer

than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the

1200 mm cross tees.

Perimeter trim to be manufacturer’s wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. All

border cut tiles shall be laid, using manufacturer’s lay-in end cap for installation to have a Microlook effect on perimeters.

Installation shall be carried out as per manufacturer’s recommended procedure.

SUSPENSION SYSTEM accessories manufactured and supplied by Knauf consisting of M6 Anchor Fasteners with hanger hole, pre–Straightened

Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. Additionally,

adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for

level adjustment during installation purpose in main runners. or equivalent as per direction of EIC and site requirement

STRETCHED FABRIC CEILING : Supply & installationof fabric false ceiling / wall formed out with TRANSLUCENT Printed fabric coverings made

out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m &5.1m with weight of

200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light transmission of 50%. The tear

strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should be accordance to B-S1, d0. The fabric should be

humidity resistant and free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s). At labeling in accordance with the French

decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with approved manufacturer guidelines. It comes with 10- year

manufacturer guarantee. The installation of TRANSLUCENT Printed fabric should be dry installation & done at room temperature using CLIPSO

2.09 MR PVC, ABS Grippers. Clipso ceiling base to be made of MS or Wooden frame finishing to a flush finish of tapered and square edges in desired Sqm 99 11863.00 1174437.00

design as per architect specification.Supply of LED Lights behind the Fabric Wall/ False ceiling in modules/ PCB with recommended wattage as

per manufacturer's standards to give an effect of ambient lighting. LED make MLS/ Bridgelux / Osram- SMD 2835, LED spacing / Pitch should be

atleast 73 -80mm with beam angle of 170 degree, Colour temperature shoud be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr.

LED modules/ PCB should be positioned properly to provide an even light flow, casting noshadows or dark spots. LED Driver Cost included.

TOTAL FALSE CEILING WORKS 2668115.39 11052710.00

3 WALL FINISHES WORKS

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Supply and installation of Aluminium Framed Glass Partition for minimal frame, room dividing solutions. Single glazed demountable glass partition

using clear toughened glass in proprietary natural anodized finish. Clip-on / U-Section of size 30mm x 21mm with suitable gaskets for insertion with

glass. It also consists of clipper two way Clear Profiles, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration

Glass thickness - 10mm (LSG).

All Profiles are min 2.5mm thickness excluding 20 microns of Anodizing, Standards applicable.

• Aluminium profile made by Al Alloy 6063-T6 Grade including all the fittings complete as per site requirement and direction of EIC

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or

3.02 9.1 with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood cu m 2.00 131576.95 263153.90

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc.

including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood cu m 2.00 163814.10 327628.20

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame

3.04 9.21 of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 72.00 2015.75 145134.00

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter

to be measured).

Providing and Fixing ESDH 1236-22X922 mm Dtype Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of approved make

3.06 MR and model all complete as per the direction of Engineer-in-charge. Each 165.00 6070.00 1001550.00

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50 mm for wooden doors of approved make and model all

3.07 MR complete as per the direction of Engineer-in-charge. Each 10.00 896.00 8960.00

Providing and Fixing FH-943 Double cylender Floor Spring- for wooden door with Closing Force EN 3 with Maximum door weight 105 Kg.

Maximum door width 950mm.Closing speed : 130°

3.08 MR Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 Years Each 26.00 8987.00 233662.00

Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in

cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and Fixing EFS ACC-001,002 top and Bottom Strap for wooden doors of approved make and model all complete as per the direction of

3.10 MR Engineer-in-charge. Each 26.00 1128.00 29328.00

Providing and Fixing EDL 024 Dead lock Back set- 50 mm with Key Hole for wooden doors of approved make and model all complete as per the

3.11 MR direction of Engineer-in-charge. Each 26.00 954.00 24804.00

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Providing and Fixing ECY 1060- 60 mm SS Cylinder One side knob and one side regular key (3 key) for wooden doors of approved make and

3.12 MR model all complete as per the direction of Engineer-in-charge. Each 26.00 901.00 23426.00

Providing and Fixing FHHS 3100 (EN 1154) - Double cylinder Floor Spring with Top-Bottom Patch,pivot and Bottom Patch Lock Maximum door

weight 100 Kg. Maximum door width 1000 mm.Closing speed : 120°,Final closing speed : 15-0°. Hold Open (standard): 90° hold open.Suitable for

3.13 MR Weight of floor spring approx : 6kg Each 139.00 9858.00 1370262.00

5 Years Warranty against manufacturing defect with 5,00,000 cycles Tested approved make and model all complete as per the direction of

Engineer-in-charge.

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top &

3.14 21.18 bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all Sqm 312.30 4540.70 1418060.61

complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass

with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum tensile strength of 3.5

pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate:

MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited Architectural Market Department.

Contractors payment wouldn't be released until & unless he/she produces orginal warranty certificate from the manufacturer.

Supply and installation of Automatic Horizontally Retractable Acoustical Wall(s) as shown on the architectural drawings.

Track and Rollers: Top hung system with track and heavy duty roller system. Supplied with necessary track plates, track strips, threaded rods,

nuts and washers, alignment pins etc. Tracks are supported by adjustable steel hanger brackets connected to structural support pairs of 12mm

diameter threaded rods. Brackets supports the load bearing surface of the track. Track consists of natural architectural-grade aluminum alloy

capable to bear the per panel load of 800 Kgs. The transfer areas are provided with aluminum junctions, switches and curves to ensure smooth

transition of panels in the parking. The trolley is made of steel and provided with stainless steel rollers to ensure durability and smooth operation

held with the 16mm bolt connected to the frame.

Suspension System: The ceiling track is to be fixed with an adjustable steel suspension of threaded rods. This steel suspension should be

adjustable to ensure absorbtion of the eventual deflection of the ceiling. The threaded rods should be protected against corrosion.

Wall Panels: 110mm thick standard panels, filled with sound insulation materials are provided with MDF cover boards. The panels are

interconnected by means of a concave / convex interlocking aluminum anodized profiles provided with an integrated EPDM magnetic strip and a

vinyl acoustic seal running along the height of the interlocking profile. The skeletal frame of each element is constructed of a non-deflecting zinc

coated steel tube with the aluminum anodized edge protecting profiles on both sides of the steel frame, bolted together. The cover boards are of

3.16 MR 16mm thick MDF board, held in acoustic free suspension with the skeletal frame and within the side profiles. Each panel to have top and bottom Sqm 40.00 55405.00 2216200.00

operable EPDM pressure seals operated by a crank handle to ensure optimum contact pressure of 1500N. The system is equipped with an

adjusting panel at one end of the wall. This panel normally at the closing end of the wall has a telescopic adjusting panel built with the same

materials as the other panels and is operated, together with the top and bottom seals, by an internal three-way spindle mechanism. The telescopic

sliding element stroke is 120 mm. There are aluminum profiles provided on both sides of the walls for better acoustics. In case of a provision of a

door within the wall, the door frame jambs is provided with retractable seals for complete and tight closure of the door panel to the floor. In case of

a provision of double door within the wall, there is a provision of active

and inactive leaves for the door. Rrecessed door handles in satin stainless steel fininsh are provided for the doors.

Sonic Barrier above False Ceiling: A sonic barrier between true slab and tracks is provided above false ceiling to the true ceiling. In case of a

height more than 1000mm special MS structural arrangement and sonic arrangement is provided at an extra cost in consultation with the architect /

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Providing and fixing Bollard Channelled woodwork acoustic wall panel of width of 192/132/128mm with finishing of 15 mm thick Grooved wooden

acoustic panel of size 2420 mm, Groove Size 3.2mm at an interval of 21mm/28 mm c/c as per acoustic design / Architects’ approval, the wooden

3.17 MR acoustic panels to be backed with black acoustic fleece with NRC of 0.45 (NRC 0.8 with 50mm GW of 48kg/m3).the edge of panel shall be Tounge Sqm 276.30 3858.00 1065965.40

and groov to be fixed with clips on aluminium profile designed specially fo the panel. the panel will be mounted with the help of clips on Bollard

Aluminium extruded Keel. The grooved acoustic panel laminated in desired shade as per Engineer In charge

Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by Architect/ Client / Customer, fixed with compatible

neutral grade silicon on a perfectly levelled 12mm thick water proof marine plywood / MDF / Mineral fibre board which is mounted on RCC wall/any

other structure. Lacquered glass must be made industrially (using curtain coating process); opaque (if viewed against a support wall), uniformly

3.19 MR coated with PU lacquer (50 micron thick coating or more); panel to panel colour consistency (measured by photo spectrometer); highly durable Sqm 270.00 4868.00 1314360.00

(passes hardness test for minimum 220 oscillations); humidity resistance (conforms to BS EN 1036 1999 or equivalent) ; environmentally

friendly having Low VOC (no lead, no arsenic, no copper, no formaldehyde), low VOC content <100g/l. Silicone used should not react with lacquer

coating (compatible neutral cure silicon)

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of

special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel

50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash

fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one

flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of

610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor

3.20 9.105 fastener or metal screws with nylon plugs at spacing of 450mm centre to centre, and fixing of boards to both side of frame work by 25mm long dry

wall screws on studs, floor and ceiling channels at the spacing of 300mm centre to centre. The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided at the

horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25mmx 25mmx0.5 mm), joint finisher and two coats of primer suitable for

board as per manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095:

part 3 (Board with BIS certification marks)

Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab & celling, cladded with Acrylic Solid Surface 12mm

thick sheets straight fabricated on a single face, finished in matte finish, pasted with industrial grade silicon on a robust substrate. Substrate shall

be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural requirement & duly painted with anti-rust red oxide coating and

3.21 MR covered with 12 mm thick water proof ply as per the design and dimensions approved. The proposal includes the cost of preparing appropriate Sqm 60.00 13362.00 801720.00

substrate surface over the civil structure provided, along with material cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING,

TABLE TOPS ETC. COMPLETE

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Providing & supplying of Window Blinds per the approved sample Duette double honeycomb shades with easy rise operating system as per

following specifications fabric specifications: • Original Non-woven honeycomb shade shaving soft fabric appearance and high energy-efficient

fabric with high tear strength constructed out of Anti static, resilent, colour fast & Sanitized Treat 100% spun bonded non woven polyester fiber &

precision manufacture to form a hexagonally shaped duette pleat• Pleat dimension ¾”Honeycomb within a Honeycomb” with 3 air pockets for

maximum energy efficiency. •Shadings are duotone, with neutral tone facing the exterior and color facing the interior The Head rail. Shall measure

49.68 wide and 36.66mm deep & thick 1.27mm extruded from 6063 T6 alu. alloy& shall be powder coated to a smooth finish with a thickness of 40

microns. Fabric shall be constructed from spun-bonded polyester fiber, precision manufactured to form a hexagonally shaped, dual pleat, cellular

construction. All cords & cord holes shall be fully concealed inside the fabric structure. As each of the hexagonal cells is formed individually, pleats

operate independent of each other providing superior pleat retention & structure strength. Installation brackets. shall be of high tension spring steel

suitable for overhead & wall mounting 30mm Duette Hartford mounting bracket. Head rail covered with Sydney Valance of height 80mm made up

of Aluminium & L shape moving Rail includes “Click & Engage" method of dimension 50mmX55mmsticked with integrated moving rail magnets

provide a streamlined look, reduce centre light gap, and promote easier operation. Polyster cord. Shall be 0.9mm in diameter & of woven hollow

core end cap shall be molded acrylic color matched to the head & bottom rails. Bottom rail shall be a single channel section, measuring 30mm

wide and 12.5mmdeep & thickness 1-1.2mm extruded from 5005 H-16 alu. Alloy & shall be powder coated with a smooth finish to a thickness of 15-

25 microns. Hold-Down bracket (optional) shall be molded in clear acrylic. It incorporates a pin for engagement with the bottom rail end-cap. It

shall be suitable for sill, face or side facing. Cord Equalizer shall be injection melded from impact modified acrylic with a high flexural modulus

Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of Roller Blindscomprising of optima

screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count 18-19/cm, having

fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear resistance should be complying to ISO4674 & breaking resistance –

ISO 5081. The DRIVE UNIT shall be of clutch for quick,easy and safe installation,moulded plastic with steel spring support and inserted into the

tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right side or left hand side of the Shade. The Shade when

lowering or raising, shall be automatically locked in position upon release of the ball chain by means of a built in friction lock.Universal clutch for

left and right hand operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be molded of plastic witha steel location pin. The plug shall be

3.24 MR inserted into the tube end. (Opposite to the Drive Unit) for ease of installation. TheSUPPORT BRACKETS shall be of coated steel & provided with sq m 630.00 2806.00 1767780.00

covers and used in right hand or left hand positions differentiated by the acceptance of the of the rectangular drive unit support or the round idler

plug pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside maximum

of80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shall incorporate a key way

integral with the tube to accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The BALLCHAIN

shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form an endless ballchain.It is used for

raising or lowering action of the shades.

Providing & supplying of fabric venetian Window Blinds as per the approved sample, consisting of 3" vane size having head rail, rotator rail and

bottom rail made of aluminium alloy 6063-T6 PER ASTM B221 - 85 extruded profile, powder coated and provided in standard natural white color.

The rolling tube should be made up of aluminium alloy from extruded profile of 34mm dia. The head rail dimensions should be of suitable size

according to the length of head rail and space available and finished with fabric cover matching with the louver fabric. The cassette should conceal

the working mechanism rotary-clutch. (White polycarbonate spring tempered rotary clutch which raises), lower and tilts the blinds. White

polycarbonate limit assemblies control vane over-rotation, located on either side of individual blinds. The room darkening fabric of Blind should be

3.25 MR of anti-static polyester vanes which have facings between two sheer layers (50 mm wide) to reduce glare. Sheer layers should be of white 100% sq m 50.00 10793.00 539650.00

knit polyester, the colors, textures and opacities as approved. The fabric shall be made of spun- bonded 100% polyester fiber (having green guard

certification) treated with soil & dust repellent requiring minimum regular interval cleaning. GREEN GUARD Gold certified for low-emitting products

to maintain Indoor environment. Up to 80% ultraviolet protection with vanes open and 90% with vanes closed. The shading to be operated by Easy

rise mechanism with a continuous cord loop operating system. All parts, components & hardware are in approved shade as per direction of

Engineer-incharge.

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per details of Architect.

3.26 MR Rate to include finishing exposed surfaces of the Pelmet with enamel paint of approved shade or 1mm laminate. metre 371.70 1782.00 662369.40

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 60.00 1018.05 61083.00

3.29 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Sqm 60.00 86.45 5187.00

13.4 12 mm cement plaster of mix :

3.30 1:4 (1 cement: 4 coarse sand)

3.31 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Sqm 50.00 214.30 10715.00

13.60 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

13.60.1 Two or more coats on new work Sqm 5000.00 137.85 689250.00

Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden/

9.140 steel frame work, complete as per direction of Engineer-in-Charge

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type Sqm 6480.00 1084.60 7028208.00

Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden/

3.34 MR steel frame work, complete as per direction of Engineer-in-Charge

4mm thick MDF Board Sqm 2250.00 273.00 614250.00

Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll form G.I. sheet with

zinc coating of 120 GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm and 0.55mm thick (Base metal thickness) fastened

to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with first & last fixing point at not greater than 50 mm from either

3.35 MR end. Boral C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6 mm and 0.55mm thick installed perpendicularly within Sqm 3200.00 1022.00 3270400.00

the flanges of floor and ceiling channels located directly opposite to each other at not more than 610mm centers. Maintain 5 to 10mm gap between

C Stud and web of U Track.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface

3.36 9.127.2 layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality- 1.0 mm Thick Sqm 3000.00 764.00 2292000.00

TOTAL WALL FINISHING WORKS 13188409.08 23263824.80

4 MISCELLANEOUS WORKS

Modular kitchen - Under counter storage cabinets:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of

drawers made of 18mm thick ISI marked commercial ply, all ply to be laminated with 0.8mm laminate. All shelves should be supported on

approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thick

4.01 MR with laminate on both sides with 18mm wide 2mm thick PVC edge banding. All Shutters finished in high gloss acrylic of approved. The cabinet Sqm 28.00 7249.00 202972.00

boxes of floor units will be supported by 100mm height vertical adjustable legs which will be covered with PVC skirting in brushed aluminum finish

attached by hardware of skirting. The unit shall be fixed to the floor/ wall/ slab using metal screws of appropriate size and rawl plugs. Only front

face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be

varies from 400x560x710mm to 1000x560x710mm (approx.) and join together as per site requirements etc.

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Modular Kitchen - Overhead storage wall units:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of

drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All shelves should be supported on approved

quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with

4.02 MR laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of approved. The unit shall be Sqm 30.00 12165.00 364950.00

fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of

boxes shall be considered for measurement and payment. Cabinet boxes size would be varies from 400x560x710mm to 1000x560x710mm

(approx.) and join together as per site requirements etc.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels Each 15.00 3548.00 53220.00

4.02B MR Providing and fixing baskets Each 15.00 4013.00 60195.00

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions

including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with

4.03 22.3 water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying Sqm 60.00 774.25 46455.00

blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet

should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Supplying 50 ltres, 2-star, direct cool, single door refrigerator, rust resistant, with adjustable legs, separate chiller compartment, mechanical

4.04 temperature control and with 1 year warranty Nos 45.00 8990.00 404550.00

TOTAL MISCELLANEOUS WORKS 46455.00 1085887.00

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Supply, Installation, Testing and Commissioning of COMMERCIAL TREADMILL

*AC driving system provides higher torque of power

for heavy loading.

*4.0 HP AC continuous (8.0 HP Peak) motor.

*24"x 65"running surface.

*Speed range 1~25 kmph

*Precise incline control from 0~18%.

*Clear and luxurious full LED design showing time,

speed, distance, incline,

5.1 MR calories, heart rate and matrix running. Each 1 178858.49 178858.49

*Various motivating programs for different workout

*Double phenolic heavy cushioned 8 elastomer shock

absorbing deck that provides

suitable push off to reduce the possibility of any type

of injury to knees & joints.

*Heavy duty reliable orthopaedic running belt.

*Inbuilt speakers with MP3 & USB connector.

*Sweat proof console design.

*Two cup / bottle holders.

Supply, Installation, Testing and Commisioning of COMMERCIAL

ELLIPTICAL TRAINER

*Rear drive and handle arms enable smooth and full

5.2 MR *Large and impact absorbing pedals provide gentle Each 1 131953.47 131953.47

reduce lower back stress.

*Friction free electro magnetic resistance : 20 levels.

*Striding distance : Maximum 20" with natural

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Supply, Installation, Testing and Commisioning of COMMERCIAL UPRIGHT BIKE

New patented Hybrid design.

With 3 pcs crank assembly.

Innovative back cushion with various adjustable

Large and impact absorbing pedals provide gentle

reduce lower back stress.

Friction free electro magnetic resistance : 16 levels.

5.3 MR With self generator power system. Each 1 90570.94 90570.94

Multiple programs for different workout requirements.

Built in hand grip pulse sensors.

Large LED display to show time, distance, RPM,

calories, pulse,

resistance level & watt.

Quick start key allows commencing exercise with a

touch of a button.

Extra sturdy & stable steel frame construction.

Supply,transportation with wheels

Installation Testing in the front.

and Commissioning of HEAVY DUTY COMMERCIAL MULTIGYM

State-of-the-art design with heavy duty steel structure

4 station gym with 3 steel weight stacks of 90 Kgs

Multiple Exercise Function – Leg press, Multi press,

Lat pull, Pec fly / Rear delt, Dip / Chin with Vertical

5.4 knee raise stand Each 1 348837.46 348837.46

Comfortable seat pads

Durable powder coated finish

Ergonomic Design / Scientific Biomechanics

Arc cover for protection.

Supply, Installation, Testing and Commisioning of TT Table "1000 DX" With 4 Rackets and 6

This table has been used in many international

including Asian Championships and Common Wealth

Championships" "FRAME SIZE 25X50MM

WHEEL SIZE :- 100MM

NO. OF WHEELS: 4 WITH LOCK 4 WITHOUT

PAINT:- DU PONT POLYURETHANE ANTI GLARE

SIZE: 2740X1525X760MM STORAGE SIZE :-

PACKAGE SIZE;- 161X145X17CM VOLUME:-

WEIGHT :- 128KG NET AND 135KG WHEN

ASSEMBLY TIME:- 7 MINUTES"

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR NO S NO DESCRIPTION UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

DSR NO S NO DESCRIPTION UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

2021 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MR 1 MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY) or euivalent as EACH 4 14614.00 58456.00

per site requirement

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE: 630X460X130

MM or euivalent as per site requirement

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

MR 3 32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP or EACH 4 2267.00 9068.00

euivalent as per site requirement

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 4 3065.00 12260.00

WALL FLANGE or euivalent as per site requirement

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 4 13797.00 55188.00

SET, SIZE: 375X520X400 MM or euivalent as per site requirement

Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE or euivalent

as per site requirement

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

FLANGE or euivalent as per site requirement

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

ADJUSTABLE WITH WALL FLANGE 15mm or euivalent as per site requirement

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH

MR 9 8mm DIA 1.2 METER LONG FLEXIBLE TUBE AND WALL HOOK or euivalent as per site EACH 4 2375.00 9500.00

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM

CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE

MR 10 CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE) or EACH 4 7381.00 29524.00

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28 11 complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6 mm thick 4 1411.15 5644.60

17.31 12 hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. EACH

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 10 500.35 5003.50

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

dia stone aggregate 12.5 mm nominal size) including necessary plaster and METRE 6 615.70 3694.20

Digitally signed by AMIT

18.76 15 Cutting holes upto 30 X 30 cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 3 362.40 1087.20

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching 6 171.80 1030.80

18.78 16 METRE

surface after housing G.I. pipe etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

Internal clamps at 1.00 on

- Exposed m spacing.

wall This includes jointing of pipes & fittings with one step

18.7.2 20mm nominal outer dia pipes METRE 60 325.10 19506.00

18.7.3 25mm nominal outer dia pipes METRE 60 408.55 24513.00

18.7.4 32mm nominal outer dia pipes METRE 20 500.95 10019.00

18.7.5 40mm nominal outer dia pipes METRE 20 674.35 13487.00

18.7.6 50mm nominal outer dia pipes METRE 20 927.00 18540.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clampswork

Concealed at 1.00 m spacing.

including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 30 441.15 13234.50

18.8.2 20mm nominal outer dia pipes METRE 20 513.75 10275.00

18.8.3 25mm nominal outer dia pipes METRE 10 626.05 6260.50

18.8.4 32mm nominal outer dia pipes METRE 10 712.75 7127.50

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 1 708.40 708.40

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

20 alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

MR nominal size) including cost of shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-

charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 200.00 536.00 107200.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20.00 416.00 8320.00

Digitally signed by AMIT

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

MR 21 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

MR 22 complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 8 536.00 4288.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 8 726.00 5808.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round

cover with screws and other required fitting complete as required.

Supply, Installation, testing and commisioning of toilet waste water super quiet portable

pumping station. Pump upto vertical 5 meters and horizontal 100 meter from toilet to vertical

MR 25 shaft with inlet connection in portable pump side inlet of 50, 75, 110 as per requirement to EACH 4 67430.00 269720.00

complete the work as per the directions of engineer in charge

Providing and fixing stainless steel tray below sewage pipe of size 200x200x200 mm of grade

MR 26 SS304 including all accessories

Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER CONCEALED

MR 27 DIVERTOR FOR BATH & SHOWER or euivalent as per site requirement

Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/SHOWER

MR 28 MIXER or euivalent as per site requirement

Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM ROUND

MR 29 EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS STEEL WITH EACH 5 21707.00 108535.00

CHROME PLATED) WITH RUBIT CLEANING SYSTEM or euivalent as per site requirement

MR 30 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 5 12004.00 60020.00

MR 31 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 5 3969.00 19845.00

MR 32 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER EACH 5 3895.00 19475.00

Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH

MR 33 LOWER HANGER

MR 34 Supply, Installation, Testing and Commisiong of ROBE HOOK EACH 5 1858.00 9290.00

MR 35 Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER EACH 4 4497.00 17988.00

MR 36 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 5 3019.00 15095.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

A.18 1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

A.19 1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2x4 sq mm FRLS PVC insulated copper conductor single

A.20 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 27920 334.00 9325280.00

PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4x4 sq mm FRLS PVC insulated copper conductor single

A.21 1.13 core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS Metre 100 537.00 53700.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

A.22 1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 2399 122.00 292678.00

1.24.5 6 pin 15/16 amp socket outlet Each 270 197.00 53190.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.23 1.26 excluding modular plate as required. Each 200 40.00 8000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

A.24 1.27 existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

B.1 1.14 insulated copper conductor, single core cable in surface/ recessed steel conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 50 334.00 16700.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 439.00 21950.00

Supplying and making end termination with brass compression gland and aluminium lugs for

C.2 9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

C.4 MR Conductor Cables :

Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(a) 3.5 C x 120 Sqmm XLPE cable Metre 200 705.00 141000.00

(b) 3.5 C x 95 Sqmm XLPE cable Metre 120 604.00 72480.00

(c ) 3.5 C x 70 Sqmm XLPE cable Metre 120 504.00 60480.00

(d) 3.5 C x 50 Sqmm XLPE cable Metre 120 403.00 48360.00

(e) 3.5 C x 35 Sqmm XLPE cable Metre 120 345.00 41412.97

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

D.2 2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

2.13 complete with connections, testing and commissioning etc. as required.

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying and fixing following way, vertical type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral

D.3 2.5 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator)

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

D.5 2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

SITC of Infrared passive technology based occupancy sensor having high performance non

D6 15.1 regulating programmable type, suitable for connected load upto 10 A for mounting height upto Each 10 4602.00 46020.00

2.8 m and for 5 diametre coverage along with necessary arrangement complete in all respect

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for floor

E.10 MR Supply, Installation, Testing and Commissioning of USB port Socket in single module Each 408 718.11 292988.94

E.11 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 60 371.29 22277.24

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box

E.12 MR along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and Set 17 9477.90 161124.35

single cable outlet/ glavanized steel, paint RAL 7031 for floor box .

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for

E.13 MR Floor Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for Set 51 6124.08 312328.27

headband and single cable outlet/ glavanized steel, paint RAL 7031 for floor box.

Supply, installation, testing & Commissioning of flat support plate 8 module for integration of

E.14 MR Mechanism for Floor Box Set 71 94.98 6743.62

Supply, installation, testing & Commissioning of waved support plates for 4 module (2x2)

E.15 MR modules for Floor Box Set 60 1241.00 74460.00

Supplying and fixing following modular switch / socket on the existing modular plate & switch

E.16 1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 108 148.00 15984.00

1.24.6 Telephone Socket Outlet Set 200 148.00 29600.00

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor,

1.18 unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Metre 400 1279.37 511749.18

E.18 (b) 225mmx38mm(GI) - 3 compartment Metre 450 1027.52 462383.64

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

MR adjustable junction box 65- 90 mm including all accessories complete in all respect as per the

directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.20 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Set 5400 47.00 253800.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

E.21 conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with

4.1 connectors suspended from the cieleing with MS suspenders including bolts and nuts painting

suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 800 1137.00 909600.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe Set 17 13838.00 235246.00

of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. Metre 2000 70.00 140000.00

5 MR Floor Panels

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Colour: Gray Powder Coated, as per approved sample.

1 nos, 250 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 320 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -8 Nos.

(b) 40 Amps, TPN, MCB - 16 nos

Panel complete as above Each 4 204973.92 819895.69

15 MR UPS Panel

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

Three (3) nos, 63 Amps. 4 pole MCB , i.e four pole Moulded Case Circuit Breaker of fault

breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

2 Nos. 100A, 4P, MCCB (25kA) with phase indicating lamp protected with 2A, SP, MCB's

along with E/M interlocking

(a ) 40 Amps, TPN MCB - 6 nos

Panel complete as above Each 4 180851.51 723406.03

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

15 MR HVAC Panel

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 320 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

Bus Bars:25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 320 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

(a) 63 Amps, TPN, MCB -4 Nos.

(b) 40 Amps, TPN, MCB - 8 nos

Panel complete as above Each 1 180000.00 180000.00

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

17 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour Nos. 20 269.00 5380.00

on front side as required

Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2

18 2.22 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour Nos. 2 292.00 584.00

on front side as required

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commissiong of 40 KVA (20 with battery bank+20 with

battery bank) KVATrue Online Double Conversion UPS 3Phase Input - 3Phase Output in

Parallel Redundant N+1 Configuration IGBT Based Rectifier and IGBT Based Inverter

Batteries:12 V, SMF Amararaja/Exide with minimum VAH capacity of 15600 suitable for 30

minutes backup with each ups Along with Accessories Rack, Interlinks, SFU, Parallel Kit, DC

MR Cable Upto 5 Meters complete in all respect as per the directions of the engineer in charge. SET 5 1016620.00 5083100.00

UPS should have availability of Input /Output isolator, Inbuilt manual bypass along with phase

sequence corrector. UPS Efficiency shall not be less than 94% from 25% to 100% Load ,

isolation etc Power factor should be more than 0.9. Overall breakup/ intergration of 200 KVA

shall be decided by EIC/client within the quoted cost

Total of Electrical items 23747870.00 10054671.62

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

S NO DSR (E & M-

DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)

Supply and Installation of pressure independent rectangular VAV unit with integral sound attenuator

made of 22G GI sheet casing length 900mm consisting of 25mm thick 48kg/m3 density fiber glass

1.0 M.R. wool covered with tissue paper ,elliptical volume control damper , calibrated differential pressure

sensor (DPT sensors) at inlet complete with digital Thermostat.(All VAV shall be factory calibrated).

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD)

380-400 VAC, IP-54 Chassis, RFI class A1 (C2), No brake chopper.

a M.R. VFD upto 35 HP or as directed by the engineer in charge Nos. 4.0 180000.00 720000.00

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air ducts. Quoted

3.0 MR price shall be inclusive of necessary conduting, copper control cabling from the sensors to the Nos. 12.0 17500.00 210000.00

respective VFDs as per "Approved Shop Drawings".

Supply, Installation, Testing & Commissioning of Silent type circular /rectangular inline fans for

exhaust air complete with sheet metal casing, 25mm thick acoustic insulation, direct driven centrifugal

fan, motor with proper protection and inspection door. Fan shall be suitable for operation on 220+6

% volts, 50 Hz,1 phase AC power supply. Flanges to be provided on both sides to facilitate duct

connections. Fan shall be installed as shown in the drawings and will be of following characteristics :

4.0 M.R. All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be

complete with Plug Top & necessary power cable.

Fans shall have low noise level in rage of 35-40dBA @3m and shall be suitable for indoor installations.

5.0 M.R. Tube Axial Fan

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following capacity

with GSS casing and aluminium alloy impellers with high efficiency aero-foil sections, blades, the

a M.R. impeller directly driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V ± 10%, complete as NOS 7.0 96750.00 677250.00

required. This cost shall include the cost for suitable panel, DOL starter,Panel ,breakers etc compete

in all respect as per the directions of engineer in charge.

M.R. 9000 cfm at 15 mm static presuure for fresh air/exhaust air With Class "H" insulation.

Digitally signed by AMIT

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return

air path as and where required of required sizes i/c control wiring,the damper shall be motorized and

spring return so as to close the damper in the event of power failure automatically and open the same

6.0 16.20 in case of power being restored. The spring return action shall be inbuilt mechanism and not externally

mounted. The damper shall also be closed in the event of fire signal complete as required and as per

specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

7.0 GI Gravity Louver

Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene rubber

gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

8.0 VOLUME CONTROL DAMPER

Supply, installation, testing and commissioning of GI volume control duct damper complete with

a 16.13 neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications SQM 30.0 7046.00 211380.00

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal

rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,

16.12.1 hangers, supports etc. as per approved drawings and specifications of following sheet thickness

complete as required.

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume

control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without

volume control dampers complete as required

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with

aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without

volume control dampers with anti smudge ring & removable core.

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of air handling

14.0 MR units/ductable split units//inline fans. Flexible connections shall be constructed using imported fire RM 100.0 1440.00 144000.00

retardant fabric with extruded aluminium frame/flange on both sides of approved make.

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the suction of

15.0 MR fresh air/discharge of Exhaust air as per the specifications and shop drawings. Sample of bird screen SQM 10.0 2850.00 28500.00

to be got approved from consultants and Clients prior to procurement.

Digitally signed by AMIT

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile

rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The

16.0 16.23 joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation

complete as per specifications and as required.

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass

wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre

17.0 16.21 to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet SQM 225.0 708.00 159300.00

fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc.

complete as required and as per specifications

Smart Indoor Air quality monitor to measure Air quality parameters including AQI, PM1, PM2.5, PM10,

CO2, Humidity and Temperature. In addition to the mentioned sensors of the base device, you can

customize it to measure more parameters by adding extra sensors. This monitor should be a 3-tier

architecture including sensor Hardware, secure cloud infrastructure, monitoring apps including

dashboard, android/IOS apps, where ever requires. Dashboard should be customisable and IOT

MR (Internet of things) enabled with view and management for all of your locations on one dashboard so

that you can easily identify and address any air quality issues. Sensors should be soft calibratable.

The System should be capable of providing periodic Preventive maintenance for automated after sales

support service in form of notification/alerts and user interaction through dashboard application.

Air Quality Monitor Nos 4.0 7580.00 30320.00

Supply, installation, testing and commissioning of DUAL COIL MICROPROCESSOR BASED

PRECISION A/C UNITS as per the specifications complete with air cooled condenser, chilled water

coil and variable speed drive for condenser fan, scroll compressor, evaporator coil with hydrophillic

coating, EC brushless motor, backward curved/ direct driven fan, first fill of refrigerent, 24 hrs

19.0 MR performance test with necessary heat load, multistage electric heater, variable capacity humidifer and

vibration isolator. Motor shall be suitable for 415 + 10% volts, 50 cycles, 3 phase AC supply and

external static pressure shall be 25 Pa. Outdoor unit motor should be with IP-54/55 protection and

should be weather proof. PAC shall have bottom throw.

Each unit shall be complete with powder coated electrical panel and double earthing. The cables

should be Cross linked polythene insulated, armoured Copper cabling, with a low smoke and flame

sheath (XLPE/SWA/LSF) and all termination between main panel and PAC should have double

compression gland. Timers shall be provided in Electrical panel for delayed start of units.

It shall be inclusive of copper piping (of required length), drain piping, control & power cabling from

MCB to indoor unit & it shall also include MCB, GI tray for supporting the refrigerant pipes (whereever

exposed to sun) between indoor and outdoor units.

Units shall be equipped with factory integrated 2 way automatic control valve with thermostat. It shall

also provided with automatic balancing valve.

The unit capacities shall be after taking deration into account due to copper piping lengths.

Condensers should be adequately sized for high ambient temperatures upto 42.2 Deg C (New Delhi

Conditions) with condensing temperatures not exceeding 56 Deg C.

The unit should include INTEGRATOR for giving industry standard (Modbus/ Lon Works/ Bacnet)

output to BMS system. Mapping shall be required for all points displayed on precision unit

microprocessor panel. It shall be inclusive of wiring in MS conduit between integrator and individual

CHW units shall be capable for delivering 6 TR actual total capacity at below rated chilled water

Chilled Water Inlet to PAHU's : 6.7 Deg C (44 Deg F)

Chilled Water Outlet from PAHU's : 12.2 Deg C ( 54 Deg F)

Digitally signed by AMIT

The air cooled units shall be complete with copper refrigerant piping with nitrile rubber insulation as

per specifications.

3TR (1W+1S) Dual Coil (chilled water & DX air cooled) Microprocessor units for Server Room

complete as required

Unit described as required complete in all respect. Nos 1.0 1258328 1258327.68

TOTAL HVAC WORKS 9514057.0 6430277.7

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C HP 60 16415.00 984900.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER

not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree

C WB temperature.

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High

wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low

fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil,

3 3.00 electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary

accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply,

complete as required. The unit shall have automatic force shut down provision in case of fire

on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

4 Joints i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Digitally signed by AMIT

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

5 5 Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

a 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 200 245.00 49000.00

b 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 400 331.00 132400.00

c 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 200 466.00 93200.00

d 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 400 588.00 235200.00

e 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 100 707.00 70700.00

f 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 100 865.00 86500.00

g 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 75 1022.00 76650.00

h 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 75 1108.00 83100.00

5 6 Cable/Wiring

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

7 MR Drain Piping

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

fittings such as bends tees etc. and duly insulated.

a 40 mm dia (9 mm thick ins.) Metre 600 285.00 171000.00

Total VRV WORKS 3015081.00 499116.00

GRAND TOTAL 3514197.00

GRAND TOTAL 3514197.00

Digitally signed by AMIT

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

A. UTP Components for Data

1. Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 METRE 21440 57.00 1222080.00

1.53.1) MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply, Installation, Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, Blue

Supply, Installation, Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow

Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

4 information outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG Nos. 268 400.00 107200.00

U/UTP Patch Cord Blue, LSZH, C6, 2M

Supply, Installation, Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for

5 information outlet (I/O) to Rack End Redantant device connectivity. High Speed Nos. 268 285.00 76380.00

Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow)

Supply, Installation, Testing and Comissioning of 24 port Loaded Jack Panel for

CAT6 cable termination at rack end. Data Active

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for

CAT6 cable termination at rack end. Data Active Redandant

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

8 Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 RM 20950 57.00 1194150.00

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply, Installation, Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, (Ivory)

Supply, Installation, Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

Supply, Installation, Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for

11 information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 419 285.00 119415.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

Supply, Installation, Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

12 information outlet (I/O) to end user device connectivity. High Speed Gigabit 24AWG Nos. 419 450.00 188550.00

U/UTP Patch Cord Blue, LSZH, C6, 2M

Supply, Installation, Testing and Comissioning of 4 Port British Style Shuttered Face

13 Plate white for I/O fixing at user side Nos. 419 156.00 65364.00

Digitally signed by AMIT

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

C. 200 Pair MDF Box

14 200 Pair MDF Box with mounting Frame Nos. 4 13020.00 52080.00

15 10 Pair Krone Module Nos. 12 900.00 10800.00

16 25 Pair Riser Cable Mtr. 200 1253.00 250600.00

Total : C - MDF Box

D UTP Components for Wifi

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

17 Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 RM 6000 57 342000.00

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, White

Supply , Installtion , Testing and Comissioning of 24 port loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for

20 information outlet (I/O) to end user device connectivity. (Field End), High Speed Nos. 200.00 285.00 57000.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered

21 Face Plate white for I/O fixing at user side Nos. 100 156.00 15600.00

Digitally signed by AMIT

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

E UTP Components for CCTV & Access Control

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

22 Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 RM 3480 57 198360.00

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, White

Supply , Installtion , Testing and Comissioning of 24 port loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for

25 information outlet (I/O) to end user device connectivity. (Field End), High Speed Nos. 116.00 285.00 33060.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered

26 Face Plate white for I/O fixing at user side Nos. 58 156.00 9048.00

GRAND TOTAL (A+B+C+D+E) 2956590.00 1725947.00

GRAND TOTAL (A+B+C+D+E) 2956590.00 1725947.00

Digitally signed by AMIT

DSR/ MR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR/ MR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

SITC of Cat 6A U/UTP Cable 23 AWG Solid Bare Copper Conductor 4 Pair, 3P/ETL Verified

as per ANSI/TIA 568.2-D, LSZH Jacket with IEC 60332-3-22 Flame Rated, IEEE 802.3bt Type

M.R. 1 4 PoE Rated, as per the specification in existing conduits/ raceways. The cable should have Mts 17480 105 1835400

flexible jacket and ripcord for easy strip ability.

Supplying, installing, testing and commissioning of Cat 6A RJ45 Modular Jack, Category 6A -

TIA 568.C.2, Category 6A - ISO/IEC 11801:2002 Ed.2, Min. 625Mhz Tested, Power Over

Ethernet (PoE) IEEE 802.3at type 1 and 2 (up to 30W), IEEE802.3bt/D1.7 type 3 and 4 (up to

100W), CISCO UPOE (up to 60W), Power over HDBaseTTM (up to 100W) Rated with 25

Years Performance Warranty, UL Listed, RoHS Certified, UL 1863, IEC 60603-7, FCC part 68-

F, Operating Temperature -10°C to +60°C, Single Tool Termination Process without

untwisting Pairs, Without Spring Shutter as it malfunctioned, Technical Datasheet should have

Worst Case Performance Values of IL <=0.48dB, NEXT Min. 37dB, FEXT Min. 31dB, RL Min.

M.R. 2 13dB, Balanced TCL Min. 19dB, PSANEXT Min. 56dB, PSACRF Min. 56dB @ 625 Mhz, Plug Nos 437 650 284050

and Modular Jacks should be interchangeable, Pairs Crimped & Cut together via Tool to avoid

manual termination issues, PBT glass reinforced Connector Body, Min. 500 M-Ohm Insulation

Resistance, Rear Connection with Copper alloy- Gold plated contacts over Nickel,

Cable/Connector Retention Min. 66N, Connector/Hardware Retention Min. 88N,

Plug/Connector Retention Min. 50 N.

Supplying, installing, testing and commissioning of Patch Panel, 24 Port, 1U, loaded Straight

Patch Panel with Discrete Angled Modules, Unshielded, Straight Bar with angled 6 Port Blank

Modules with Cable Support Bar, ETL Verified Panel to Min. 600Mhz (enclose ETL report),

Without Spring Shutter as it malfunctioned, Ports with individually replaceable & Consistent

M.R. 3 port-to-port performance, Steel, 16 gauge, powder paint finish, black, plastic inserts, UL94V-0 Nos 20.00 4800 96000

plastic, Black, Four removable/reversable Inserts/modules with 6 no. of IO slot per Module,

Cable support bar should be provided separately with panel, RoHS complied with ACA safety,

ETL Test Report 600 Mhz for ISO/IEC 11801-1 and ANSI/TIA-568-C.2 standard needs to be

submitted along with bid.

Supply , Installtion , Testing and comissioning of 4 Ft Cat6A LSZH Stranded Bare Copper

ETP Patch Cord, Foam-skin Polyethylene Insulation, Contact Blade Phosphor bronze plated

with 1.27um gold over 2.54um nickel undercoat, Clear Transparent PVC Boot, Polycarbonate

M.R. 4 (PC) Plug Housing, LSZH Jacket, 6.1 mm OD, Technical Datasheet should have Min. 625Mhz Nos 437 564.37 246632

Tested, Operating and Storage Temperature -20°C to +60°C.

Supply , Installtion , Testing and comissioning of 7 Feet Cat6A LSZH Stranded Bare Copper

ETP Patch Cord, Foam-skin Polyethylene Insulation, Contact Blade Phosphor bronze plated

M.R. 5 with 1.27um gold over 2.54um nickel undercoat, Clear Transparent PVC Boot, Polycarbonate Nos 437 946 413402

(PC) Plug Housing, LSZH Jacket, 6.1 mm OD, Technical Datasheet should have Min. 625Mhz

Tested, Operating and Storage Temperature -20°C to +60°C

Digitally signed by AMIT

Supply , Installtion , Testing and comissioning of 86×86 KeyConnect, Single/Double/Quard

Port with Shutters, UK style, 2 Plates/Pieces Face Plate, Mounting Frame and Cover Plate

with write on labels in transparent plastic window – supplied with plate for better aesthetic look

M.R. 6 (Premium Type), Almond Color, Mounting Screws 2 pcs, M3.5 x 25mm, with covers, Elegant: Nos 437 156 68117

hidden-screw design, RoHS Complied in datasheet, Should be able to accept Cat6A, Cat6

and Cat5e information outlets, Fire Retardant Plastic, ABS. White Color for I/O fixing at user

side For Data ,Voice ports

M.R. 7 SITC of 06 core OM6 Multimode fiber orange color 50/125, minimum bending radius 15x OD Nos 6000 135 810000

Supply, Installation, Testing & Commissioning of 42 U Network Rack with 19''PDU 6 points 5

M.R. 8 amp , Stationary shelf, Mounting Hardware(pac. Of 10) , Cable manager Horizontal 1U , Nos 5 52000 260000

Fan 230 vac 90 cfm top mounted .

TOTAL CAT 6A 0 4013601

Digitally signed by AMIT

S No Description UOM Qty Rate DSR NDSR Amount

A. Active Component for Data, Wifi

24-Port Layer 3 Stackable Managed Gigabit Switch, catalyst 9500 24x1/10/25G and

1 4 port 40/100G advantage an 24-port 25/100 G advantage with 650 W power supply. Nos. 1 1261967.00 1261967.00

With the above specifications or higher

Supply instllation testing and commissioning of Access Switch of 48 port PoE+,

4x10G, Network essentials, DNA essentials

SITC of 48 port 10/100/1000 Base T Switch with 4 x 10G SFP+ ports,The Switch

should have 16K MAC address, Should have RJ-45 console port should

support MSTP and DUAL configuration, Should support Static Route Entry: IPv4

124; IPv6 50 , Should support IP-MAC- Port Binding strictly management network

devices preventing illegal access and the Man-in- the-middle attack, Should support

3 Asymmetric VLAN, Auto Voice VLAN, Should support Cable diagnostics, Time- Nos. 14 215000.00 3010000.00

based PoE: PoE ports can be turned on/off by port or system through

schedule, Operating Temperature -5 to 50°C (23 to 122°F). As Approved by NSL

4 SITC of wifi controller _fibre uplink Nos. 1 385500.00 385500.00

SITC of wifi wireless access point-C9120AX Internal 802.11ax 4x4:4

MIMI;IOT;BT5;mGig;

6 Providing and laying of LC- LC multimode OFC type patch cord for data and voice. Nos. 30 3850.00 115500.00

Supply, Installation, Testing and comissioning of Router with following specification:

•Two WAN router in high availability require at WAN layer. These routers will be

used to terminate the WAN links as internet G/W router.

•2RU platform with 2 SM and 2 NIM slots plus 2 x 10Gbps and 4 x 1Gbps embedded

Layer3 Ethernet ports

• IPV4 Throughput: 19.7 Gbps and IPSEC Throughput 18.8 Gbps.

• Both PRI lines will terminate on voice routers one on each for HA.

7 •1 NIM slot and 4x 1 Gigabit Ethernet WAN ports, 4 GB Memory (DRAM) default. Nos. 2 750262.00 1500524.00

•One 1 Port PRI card each

• There shall be no single point of failure and the network will incorporate standby

gateway router, layer 3 switch, IPT server and voice gateway in hot standby load

Digitally signed by AMIT

SITC of firewall solution with the following specifications:

Firewall is proposed in high availability Mode to provide protection against outside

8 cyber attackers by shielding network from malicious or unnecessary network traffic. Nos. 1 2498310.75 2498310.75

Firewall will be placed in between WAN/Voice Router and Core-3 Switch. (which is

not shown in above Network topology)

Supply, Installation, Testing and Commisioning of Server with the following

configuration: Form Factor/ Height: 4 U rackable tower, Processors: 2x 3rd

Generation Intel Xeon Scalable processors upto 250 W, Memory: 64 GB in 16x

DIMM slots using 128GB DIMMs; 3200MHz TruDDR4; upto 16x Intel Optane

Persistent Memory 200 series module (PMem) installed in combination with system

memory DIMMs, Expansion Slots: 8x PCIe 4.0 slots plus 1x PCIe 3.1 slot (with 2x

processors), Network Interface: 2x 10GBASE- T ports; 1x IGbE dedicated

management port, Ports Front: 1x USB 3.1 G1, 1x USB 2.0 with XClarity Mobile

support Rear: 4x USB 3.1 G1 . 1x VGA, 1 x RJ- 45 (management), 1x external

diagnostic handset port, 1 x serial port, HBA/RAID Support: SW RAID standard;

optional HW RAID upto 32 ports, or SAS HBAs upto 16 ports

Supply, Installation, Testing and Commissioning of NAS (network attached storage)

10 with total 16TB capacity (4TB x 4 nos) Nos. 7 181838.00 1272866.00

SITC of 43" diplsay panel with IPS technology, 16:9 aspect ratio, 1940 x 1360 (4K)

native resolution, 350 nits brightness, 178 x 178 degree viewing angle, hard coating

(3H) minimum surface treatment, should be anti glare treatment, should be 24 hours

11 operational hours, should be usable in landscape or protrait modes, should have Nos. 10 59500.00 595000.00

atleast 2xHDMI, DP, DVI-D, RGB, Audio, USB 3.0, should have RS232C in/out,

RJ45 In, IR receiver in, pixel sensor in etc all complete.

SITC of A4 Black and white Laser Multifunction device; Print; Copy and Scan,

12 Dynamic Security enabled printer,Email, USB; Ethernet; Wi-Fi as per direction of Nos. 10 135174.00 1351740.00

EIC/client. Printer should be highr duplex printer and heavy duty

SITC of Rodent control, WLD, VESDA system in Main Server room as per

requirement of site and direction of Engineer Incharge.

Providing of AR-VR devices having wifi inability, controller and charging system as

per the selection of EIC/ Client

SITC of NMS for the system which can manage more than 5000 device and would

15 support most of the repute OEM products for the same as per th selection of client Nos. 1 1234200.00 1234200.00

Total : A - Active Component for Data, Wifi 23703507.75

Digitally signed by AMIT

Schedule of Quantities: FTTO Switch & Cabling

S No Description Unit Qty Rate DSR Amount Non DSR Amount

SITC of 24 Port Fiber LIU Loaded with SC MM Coupler, Splice tray with layered structure,

A.01 Conformance to Multi Mode (ANSI/TIA-568.3-D, IEC 61300-3-4, IEC 61300-3-6, IEC 60874-1, Nos. 6 43,996.00 0.00 263,976.00

ISO/IEC 11801) as per given Specification etc. all complete

A.02 SITC of Multimode fiber termination at the user end Nos. 140 673.00 0.00 94,220.00

Digitally signed by AMIT

Schedule of Quantities: CCTV

S No Item Description UoM Rate DSR Amount NDSR Amount

SITC of IP Vari Focal Dome IR Camera with mounting brackets: 1/2.8" Image Sensor; Resolution:

1920X1080; Lens: Fixed Focal; f:2.8 to 12 mm; Iris: Fixed; Colour:0.1 [email protected] B/W:0 lux (IR LED

ON); Day/Night; WDR;Privacy Masking : 8 Zone ; Video Intelligence:Tampering VMD, & Trip Zone;

IR Distance: 30 Mtr; Shutter Speed : 1/30 ~ 1/10000 sec or higher ONVIF S, Protocols :

1 RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/UDP RTSP/TCP, HTTP, HTTPS, FTP, SNTP, SMTP, No's 40 12,500.00 500,000.00

Controlled Backlight compensation; Connectivity:RJ45(10/100 BASE-T); POE; Video Streaming:

Four;Edge Storage 256 GB : Multiple Option; Protection: IP 67; IK10, Operating Temperature: -20

degree C - +55 degree C;Operating Humidity: 0% -90%. MTBF time 1,00,000 Hours (Report to be

Submitted) Certifications: CE,FCC,BIS/UL etc complete as required etc all complete

SITC of 64 Channel Rack mount NVR , H.264/H.265 compression, network incoming throughput of

850 Mbps and 12MP recording resolution, time division multiplexing, real time recording of multiple

cameras, storing digitized and compressed images on internal hard disk drives, fast search and

retrieval either locally at the unit, or Graphical User Interface (GUI), all connected cameras to be

discovered and configured automatically, simultaneous live view, record, play back, data

transmission in real time, maximum throughput of 400 Mbps, UHD 1920 ips, support H.264/H.265

compression, 2X – 12X digital zoom in live view mode, 2X – 12X digital zoom in playback mode,

time lapse, event, time lapse + event, pre / post-event, panic recording schedule, recording bitrate

control mode: CBR and VBR, alarm, audio, motion, trip zone, video loss, text-in, system event

triggering, fan error, record failure, storage related alerts and alarm in error, email, remote

2 notification (call back) to remote work stations, mobile device push and SNS (Twitter) notification, No's 1 415,250.00 415,250.00

Time-lapse, Event log, Motion, Thumbnail, Text-in search options, SSL, Password encryption

options, network keyboardfor controlling the NVR and PTZ, 1 Gigabit Remote Client port, 4 Gigabit

ports, ONVIF compliant , output interface 1 HDMI (up to 4K), 8 internal SATA ports (10TB per SATA)

with recording capacity up to 80 TB or more , RAID support as 1, 5, 10 - user may choose &

configure as per security needs on internal SATA , redundant dual power supply ,2 USB for backup

/upgrade, BIS certified, internal Admin service, monitoring servics, Left object detection, compatible

to AI cameras, ANPR cameras for future., Support Bookmarking, Support SSL, privacy masking and

password support is required on exported videos, Failover services in 10:1mode etc all complete

SITC of 10 TB Surveillance Hard Drive, With a workload rating of up to 180 TB/yr, built for always-

on, 24/7, high-definition surveillance systems etc all complete

SITC Redundant Server Intel I7 Xeon Quad Processor with 2 x 8GB RAM , 1 Tb HDD, TFT Display ,

4 Keyboard, Mouse complete all accessories .as per specifications of this tender etc complete as per No's 1 275,750.00 275,750.00

specifications etc. all complete

IP CCTV and Suvilliance Solution 1,496,370.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

Supply, Installation, Testing and Commissioing of LED Recess luminaire with

LED(Light Emitting Diode) maximum system power: 28W, 120 LM/W system efficacy,

colour temperature of 4000K, neutral white, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours, energy efficient LEDs, CRI>80, R9>0,

minimum luminous flux of 3360 lm, MacAdam 3, T.H.D≤5%, driver efficiency ≥ 88%,

surge protection of 2.5kV, direct light emission, Aluminium extrusion body, polyester

white powder coat applied over a 5-stage pre-treatment, Triangular Prismatic diffuser

for glare-free uniform light, UGR<16, Electronic control gear or euivalent as per site

requirement Protection class I, IP40, L =1195mm, B = 295mm, H = 67mm, PH =

Supply, Installation, Testing and Commissioing of Recessed downlightwith HPE (High-

Performance Efficiency) with LED (Light Emitting Diode), maximum system power: 15

W, minimum Luminous flux of luminaire 1500 lm, 100 LM/W system efficacy, Colour

temperature of 4000 K, Neutral white, CRI > 80, MacAdam 3, T.H.D≤5%, R9>0,

driver efficiency ≥ 88%, surge protection of 2.5kV 230V constant current driver, 70%

of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light

emission, housing in die-cast aluminium, Polyester powder white coloured coat

applied over a 5-stage pre-treatment trim, prismatic diffuser for homogenous light

distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear or

euivalent as per site requirement Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160

Pendant luminaire with LED (Light Emitting Diode), maximum system power 28 W,

minimum luminous flux of luminaire 1600 lm, 100 Lm/w, , CRI>80, R9>0, THD<5%,

P.F>0.95, Driver Efficiency>88%, SDCM<3, colour temperature of 4000 K, Neutral

white, 230V constant current driver, 70% of luminous flux after 50,000

operating hours, energy-efficient LEDs, luminaire profile in aluminium, Plastic

3 MR moulded end caps, Polyester powder Aluminium white coloured coat applied over a 5- no 450 4162.68 1873205.44

stage pre-treatment, Deep recessed high-efficiency glare-free snap-fit micro-

prismatic diffuser for homogeneous light distribution, UGR<19, ZHLS (Zero Halogen

Low Smoke) internal wiring, integral electronic control gear, adjustable suspender,

Protection class I, IP20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max = 1500

mm.or euivalent as per site requirement

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

17.2.4 1 detector complete with mounting base complete as required. No 210 2858.00 600180.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector

with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commissioning of addressable fire control module complete

Supplying, installation, testing & commissioning of addressable phone control module

17.2.11 6 complete as required. No 4 3267.00 13068.00

Supplying, installation, testing & commissioning of intelligent addressable duct detector

17.2.13 7 including suitable Photo detector complete with base as required. No 16 7814.00 125024.00

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB,

17.3.1 10 MP3 player (including 6 zone button paging station) with seamless integration facility with No 1 126411.00 126411.00

main fire alarm panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 150 Watt, 25V rms

MR 12 operating at 240 Volt AC Supply complete as required. NOS 4 74598.00 298392.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

17.5.2 13 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath Mtr. 2750 173.00 475750.00

complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

17.5.3 14 existing surface / recessed steel conduit of following pairs, cores and size including

connections and interconnections etc. as required.

speaker cable Two pair, 2-core, 1.5 sqmm

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

17.5.4 16 and accessories like coupler etc. as required. Metre 1500 53.00 79500.00

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

M.R. 17 backup complete as required. NOS 30 3870.00 116100.00

Digitally signed by AMIT

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

17.3.9 18 microphone assembly complete as required. NOS 1 81756.00 81756.00

Supply, Installation, Testing and Commisioning of Loop Card capacity of 159 detectors For

BMS Fire integration compatible with existing system

Supply, Installation, Testing and Commisioning of Interface Card for BMS fire integration

compatible with exisiting system

Supply, Installation, Testing and Commisioning of repeater panel having 640 character liquid

crystal with backlit control compatible with existing system

TOTAL FIRE ALARM WORKS 2290311.00 1365092.00

GRAND TOTAL 3655403.00

GRAND TOTAL 3655403.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - IPABX

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing & Commissioning of Server based Communication

System with all the required Software licenses and Hardware - IP-PBX/IP

Telephony Communications Server: The IP Telephony Solution shall support the

following Services - Voice, Video, IM, Presence and Audio Conference The

Solution should be built on Active-Active Redundant Servers The IP Telephony

Solution should support H.323 and SIP The Solution should support the following

Trunks - FXO, E1 PRI and SIP The IP Telephony solution should incorporate all

licenses for the Phones and Trunks Solution should support 80 Extensions from

Day 1 with future scalabilityupto 5000 users. Licenses for all Phones supplied

should be provisioned on Day1 Solution should support Hard IP Phones,

Softphones, Video Phones, 50 Analog Extensions with necessary Licenses, Rack

mount architecture, complete as required and as per technical specifications.

Supply, Installation,Testing and commisioning of Executive Level IP Phone with

Color display -Touch Screen display, having function of vedio calling, 4-position

adjustable tilt display, Permanently-labeled feature buttons:, speaker, mute,

headset, contacts, home, history, message, phone, forwarding, volume (separate

volume levels in handset, speaker, ringer, and headset), Red LEDs on speaker,

mute, headset, message and history, 24 administrative buttons, Wideband

speakerphone 0-5 Softkeys, Ergonomic hearing aid compatible, handset

supporting TTD acoustic coupler, Bluetooth and DECT headset support with

2 adapter, Message waiting indicator, Ethernet (10/100/1000) line interface, Nos 25 25200.00 0.00 630,000

Secondary Ethernet (10/100/1000)line interface, Optional IEEE PoE 802.3af

adapter registers as class 2 device, SIP protocol, H.323 protocol support,

Standards-based codec support: G.711, G.726, G.729A/B, G722 , Supports the

following languages: Arabic, Brazilian Portuguese, Simplified, Chinese, Dutch,

English, Canadian,French, Parisian French, German,Hebrew, Italian, Japanese

(Kanji,Hiragana and Katakana), Korean, Latin American Spanish, Castilian

Spanish, and Russian. Include Licence.

Supply, Installation,Testing and commisioning of Executive Level IP Phone with

Color display – 3.7 inches x 2.1 inches (9.5 cm x 5.4 cm)- Diagonal width: 4.3

inches (11 cm), Touch Screen display, 4-position adjustable tilt display,

Permanently-labeled feature buttons:, speaker, mute, headset, contacts, home,

history, message, phone, forwarding, volume (separate volume levels in handset,

speaker, ringer, and headset), Red LEDs on speaker, mute, headset, message

and history, 24 administrative buttons, Wideband speakerphone 0-5 Softkeys,

Ergonomic hearing aid compatible, handset supporting TTD acoustic coupler,

Bluetooth and DECT headset support with adapter, Message waiting indicator,

3 Ethernet (10/100/1000) line interface, Secondary Ethernet (10/100/1000)line Nos 47 21500.00 0.00 1,010,500

interface, Optional IEEE PoE 802.3af adapter registers as class 2 device, SIP

protocol, H.323 protocol support, Standards-based codec support: G.711, G.726,

G.729A/B, G722 , Supports the following languages: Arabic, Brazilian Portuguese,

Simplified, Chinese, Dutch, English, Canadian,French, Parisian French,

German,Hebrew, Italian, Japanese (Kanji,Hiragana and Katakana), Korean, Latin

American Spanish, Castilian Spanish, and Russian. Includ Licence.

Supply Installation, Testing and Commissioning of Analog Speaker Phone with

Total 3,486,250

Digitally signed by AMIT

Schedule of Quantities: Access Control

Sl No. Description Unit Quantity Rate DSR Amount Non DSR Amount

Supply, Installation, Testing & Commissioning of 2 door 2 reader

access control systems with ARM 32 Bit RISC Processor, Up to 8

MB Flash Memory,40000 transactions, 100000 users, Modbus

availability, 16X2 LCD Display, 4X3 Key with soft keypad, 0°C to

1 50°C temperature, Antipassback,Power Supply with provision for Nos. 11 53966.19 593628.09

battery Backup inside the cabinet ,Multiple communication protocol

which enhance flexibility to integrate with multiple third party

environments e.g. BMS, IT admins, CCTV/IP Camera Integration

with Access Event for security Audit.

Supply, Installation, Testing & Commissioning of smart card reader

with 13.56 MHz frequency, 0.1 sec read time, 4-9 cms read range,

2 Bi colour LED, Advanced key management systems to reduce the Nos. 20 9354.14 187082.73

risk of compromised data or duplicated cards,Pigtail termination

Supply, Installation, Testing & Commissioning of Electromagnetic

Lock, 600 lbs strength (Single and double leaf door), LED Status

3 Indicator with required Lock bracket. Separte Power supply for each Nos. 20 9929.78 198595.59

EM Lock to be provided.

Supply, Installation, Testing & Commissioning of Exit Push Button

Supply, Installation, Testing & Commissioning of Web based

access Management software for upto 500 Users, The software has

very user friendly modular interface that is easy to operate with rich

in functionality and also provides comprehensive various useful

reports. Software has various other functions likeDevice

configuration, Masters, Access Management etc..Cloud

Compatible,Multi location/Department, Multi login users with rights,

Time Zone (with Free time zone), Central Date & time

Synchronization, User wise Latest swipe display, MS·SQL Server

2014 or, Higher, Database backup, Excel sheet Import for masters

Supply, Installation, Testing & Commissioning of Visitor

Management Software (Server License) (Advance Edition) with

6 SQL Express database .This will include a common license for Nos. 1 55405.29 55405.29

Host, Security and Admin .SQL Licence in Customer Scope.

Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of

Visitor Management Software (Client License) (Advance Edition) wit

7 h SQL Express database.This will includeeither a Host or a security Nos. 20 32379.72 647594.43

license.SQL Licence in Customer Scope. or its equivalent as per

site requirement

Supply supply, Installation ,testing and commissioning of Armoured

Cable 8Cx1 sqmm Multistand shielded.

SITC of Biometric Machine: User identification in 1 second

Minimum 500 Users and Expandanbe up to 10,000 users (30,000

templates) in 1:N identification mode, 2.8” QVGA color touchscreen

and buzzer 250,000 IDs in authorized user list, 1 Million logs. CPU:

ARM Cortex-A9 core 1GHz, Linux Operating System, Fake finger

detection, Duress finger, FBI PIV IQS certified optical fingerprint

senso, Network / Communication: - Ethernet, RS485, USB,

Wiegand and OSDP support ,Integrated Smart Card Reader,

Internal storage capacity: 512MB Flash, 512MB RAM, Operating

conditions: - Temperature: -20°C to 55°C (-4°F to 131°F) -

Humidity: 10% to 80% (non condensing), Ingress protection: IP65,

EMC/Safety standards: - CE, CB, FCC, BIS - UL294 , RoHS,

REACh and WEEE etc all complete

SITC of Smart card Frequency Excitation (13.56 MHz) Mifare smart

Card , distance upto 2.5" Memory Type EEPROM, 2K bit memory

10 Complies with ISO/IEC standards for thickness. Lifetime Warranty Nos. 400 354.89 141955.30

etc all complete

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

18.7 tapers, nuts bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint

of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree

2 centigrade with required accessories :

18.21.4 Concealed Sprinkler 872 Each 1435.00 1251320.00

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with maximum

working pressure of 175 PSI test pressure of 875 PSI

3 18.25 (Burst) with branch line (Inlet) 25mm NPT male thread to

sprinkler head (Outlet) 15mm NPT female thread with

reducer, nipple, 2 side brackets, center bracket,

stockbar of following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 4.5 Litre capacity (IS:15683). 20 NOS 12911.83 258236.50

Digitally signed by AMIT

Mechanical Foam gas cartridge type. 9 Kg capacity

ABC dry powder stored pressure type 6 kg capacity

Providing and fixing of pressure switch in M.S. pipeline

including connection etc as required

Providing and fixing of flow switch in M.S. pipeline

including connection etc as required

Grand Total 3991546.50

Grand Total 3991546.50

Digitally signed by AMIT

Schedule of Quantities: AV System

S No Item Description UoM Qty Rate DSR Amount NDSR Amount

SITC of 55" Direct LED Backlight videowall display Full HD 500cd/m² Full HD

monitors. Brilliant images. Clear contrast IPS panel: rich color consistency from

every angle,Extra-narrow (0.8 mm) bezels. For distraction-free images, Contrast

ratio (typical): 1400:1 Dynamic contrast ratio: 500,000:1, Response time (typical):

8 ms, Aspect ratio: 16:9, Viewing angle (H / V): 178 / 178 degree, Pixel pitch:

0.63 x 0.63 mm, Display colors: 1.07 B

2 SITC of 3x2 video wall mounting for the above video wall No's 2 301,865.00 603,730.00

SITC of Screen Size 98" Interactive display Pixel Pitch 0.429 x 0.429 mm,

Resolution 3840 (H) x 2160 (V) 4K, Brightness ≤500 Nits, Contrast Ratio ≦4000,

Viewing angle 178°,178°, Response time 5ms, Display color 8 bit/16.7 Million,

Backlight DLED,Speakers 2*15W

SITC of 86" Professional Ultra HD Display Panel, 4K UHD (3840x2160)

Resolution, Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing

angle (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel

4 technology: IPS / Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video No's 3 323,819.51 971,458.53

Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232,

Ethernet, 2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all

SITC of 75" Professional Ultra HD Display Panel, 4K UHD (3840x2160)

Resolution, Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing

angle (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel

5 technology: IPS / Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video No's 10 153,742.20 1,537,422.00

Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232,

Ethernet, 2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all

SITC of 65" Professional Ultra HD Display Panel, 4K UHD (3840x2160)

Resolution, Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing

angle (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel

6 technology: IPS / Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video No's 15 105,698.00 1,585,470.00

Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232,

Ethernet, 2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all

Digitally signed by AMIT

SITC of 55" Professional Ultra HD Display Panel, 4K UHD (3840x2160)

Resolution, Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing

angle (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel

7 technology: IPS / Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video No's 18 80,074.06 1,441,333.13

Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232,

Ethernet, 2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all

SITC of 43" Professional Ultra HD Display Panel, 4K UHD (3840x2160)

Resolution, Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing

angle (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel

8 technology: IPS / Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video No's 40 59,500.00 2,380,000.00

Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232,

Ethernet, 2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all

SITC of Fixed Wall Mount, capable of holding up to 75 kg and supports 37" to 90"

displays, VESA Compliant etc all complete

SITC of Fixed Wall Mount, capable of holding up to 110 kg and supports 75" to

98" displays, VESA Compliant etc all complete

SITC of Wireless Presentation Platform, allows simultaneous content sharing for

up to four 1080p presenters, Wireless screen casting with iOS, Android, Mac,

Chromebook, and Windows devices through native AirPlay, Google Cast, or

Miracast protocols, Supports YouTube Live streaming, Local storage available for

playback of images and video, WPA2-PSK, and AES-128 encryption, with

wireless access of camera & microphone with or without dongel etc all complete

SITC of Cable Cubby with flip top, cover and multi-format cables, 2 Universal

12 Power, 1 HDMI, 1 USB-C, 1 Ehternet Cable, made of steel and aluminium etc all No's 88 19,858.00 1,747,504.00

SITC of of Wooden Podium one shelf, with Dual Gooseneck Microphone

13 connectivity and LED Light, Power extension, alokng with touch screen to view No's 2 165,200.00 330,400.00

the main screen content with all required accessories etc all complete

SITC of of Digital Podium one shelf, with Dual Gooseneck Microphone

connectivity and LED Light, Power extension, along with touch screen to view the

main screen content with all required accessories etc all complete. Front digital

sinage display as per requirement and as per direction of client

SITC of All in One Conference Unit, Auto-Framing, Plug-and-play USB

connectivity, Built-in Components: 6 Beamforming microphones, PTZ camera,

Speakers, AI Viewfinder, cable management & retention system, table stand etc

Digitally signed by AMIT

SITC of Network PTZ Conference Camera, 12x optical zoom and 60° horizontal

FoV, 1/2.8” low-noise CMOS Sensor, Sensor Scanning Mode: Progressive,

Horizontal Rotation Range: ±170°, Vertical Rotation Range: -30° to +90°, Image

rotation for ceiling mounting, White Balance: Auto, indoor, outdoor, one-push,

manual, specified color temperature, IP Stream Resolutions: H.264 @ 360p,

270p or 180p, a single network cable for video, power and control data transport,

HDMI 2.0 and 3G-SDI Outputs Power Over Ethernet (PoE) support etc all

SITC of HD Visual Communications System, SIP, H.323, 6-Site Connection, Dual

Network, Enabling High-Definition Web Conferences, Video Compression

Method: H.261 (mainstream only), H.263, H.263+, H.263++ (reception only),

H.264 High Profile, H.264 Baseline Profile, Video Input: 2 HDMI, 1 PC, Video

output: 2 HDMI, IP mode, NAT Traversal mode, IP / NAT Traversal mode etc all

SITC of Universal Switcher with HDMI and USB-C connectivity, 1 HDMI Inputs, 1

USB-C connectivity (4K Video, Audio, Data, Power charge), 1 HDMI Outputs, 4

USB-A 3.0 Connection (for USB Devices), 1 USB-B 3.0 Connection (for PC

18 hosts), USB host switching, Analog audio de-embedding, Charging via USB-C up No's 2 272,000.00 544,000.00

to 60w, Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18

Gbps), DP Alt Mode, HDMI 2.0, HDMI 1.x, DVI Signal Support, HDCP 1.x, HDCP

2.2 support etc all complete

SITC of Universal Switcher with HDMI and USB-C connectivity, 2 HDMI Inputs, 2

USB-C connectivity (4K Video, Audio, Data, Power charge), 2 HDMI Outputs, 4

USB-A 3.0 Connection (for USB Devices), 2 USB-B 3.0 Connection (for PC

19 hosts), USB host switching, Analog audio de-embedding, Charging via USB-C up No's 8 288,907.00 2,311,256.00

to 60w, Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18

Gbps), DP Alt Mode, HDMI 2.0, HDMI 1.x, DVI Signal Support, HDCP 1.x, HDCP

2.2 support etc all complete

SITC of HDMI 2.0 Matrix Switcher, 4HDMI Inputs, 3 Outputs, with breakout

Audio, Occupancy Sensor input and various control features, Supports HDMI 4K

20 signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps), HDMI 2.0, HDMI 1.x, No's 6 322,718.00 1,936,308.00

DVI Complaint, HDCP 1.x, HDCP 2.2 support, GPIO control ports, Device control

via Ethernet (TCP/IP) etc all complete

SITC of 8 Inputs and 8 Outputs HDMI 2.0 Compatible Full 4K Matrix Switcher,

Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps),

HDCP 2.2 and HDCP 1.4 compliant with cross conversion capabilities, HDMI 2.0,

HDMI 1.4 and DVI 1.0 compliant, HDR and Low Latency Dolby Vision support,

Audio de-embedding, HDCP 2.2 and HDCP 1.4 compliant, Advanced EDID

Management, Fully non-blocking switching architecture etc all complete

Digitally signed by AMIT

SITC of HDMI 2.0 Extender (Transmitter) , Supports HDMI 4K signal formats (4K

UHD @60Hz RGB 4:4:4, up to 18 Gbps), Bi-directional PoC remote powering,

22 Extends HDMI 2.0, audio, Ethernet, RS-232 up to 100m over one CATx cable, No's 4 118,190.00 472,760.00

HDR and Low Latency Dolby Vision support, Bi-directional RS-232 extension

(pass-through),HDCP 2.3 compliant (transparent pass-through) etc all complete

SITC of HDMI 2.0 Extender (Reciever) , Supports HDMI 4K signal formats (4K

UHD @60Hz RGB 4:4:4, up to 18 Gbps), Bi-directional PoC remote powering,

23 Extends HDMI 2.0, audio, Ethernet, RS-232 up to 100m over one CATx cable, No's 4 118,190.00 472,760.00

HDR and Low Latency Dolby Vision support, Bi-directional RS-232 extension

(pass-through),HDCP 2.3 compliant (transparent pass-through) etc all complete

SITC of Central Conference Controller with Recording & Web Server, with built-in

Digital Signal Processing, Control upto minimum 50 Discussion Unit and

expandable upto 150 Discussion Unit by configuring multiple Controller Unit, Two

USB Connections to connect USB Storage Device for Direct Recording of the

Meeting, Camera Control Integration Capability, Conference Mode: Direct

access, Request, Push to talk, FIFO, Vox control, Selectable Voice Activation,

Digital Acoustic , Feedback Reduction, With Audio Input & Output for connectivity

with external sysytem like amplifier, microphone & audio/video conference

system, Audio Quality 16Bit digital, With Power Saving Mode allows controller to

sleep state if it has been left ON, CE Certified.

SITC of Chairman Discussion Unit with Gooseneck Microphone of minimum

Length 400 mm, built-in Digital Signal Processing, Priority button silences all

delegate microphones and allows only the chairperson to speak, Next-in-line

button gives the floor to the next speaker in a waiting list of speakers who

requested to speak, User Button with Feedback, Shielded microphone, immune

25 to mobile phone interference, High-quality integrated loudspeaker, Headphone No's 2 52,000.00 104,000.00

output with Volume Adjustment, Loop-through, daisy-chain cabling, Different LED

Signalling for Mic On/Off OR Request-to-Speak Push Button, Audio Quality 16Bit

digital, Frequency Response: 30Hz-15kHz, Microphone with 400 mm Gooseneck

Length with , Polar Pattern: Unidirectional, Cardioid, Max SPL @ 1kHz: 110dB

SPL, S/N Ratio: 67dB-A CE Certified.

Digitally signed by AMIT

SITC of Deleagte Discussion Unit with Gooseneck Microphone of minimum

Length 400mm, built-in Digital Signal Processing, Microphone On / Off Button,

Shielded microphone, immune to mobile phone interference, High-quality

integrated loudspeaker, Headphone output with Volume Adjustment, Loop-

26 through, daisy-chain cabling, Different LED Signalling for Mic On/Off OR Request- No's 28 35,681.00 999,068.00

to-Speak Push Button, Audio Quality 16Bit digital, Frequency Response: 30Hz-

15kHz, Microphone with 400 mm Gooseneck Length with , Polar Pattern:

Unidirectional, Cardioid, Max SPL @ 1kHz: 110dB SPL, S/N Ratio: 67dB-A,

Connection: Screw Lock, CE Certified.

27 SITC of 2 meter Conference Cable from same OEM etc all complete No's 28 3,986.00 111,608.00

28 SITC of 20 meter Conference Cable from same OEM etc all complete No's 4 17,320.00 69,280.00

SITC of Wireless System with Handheld Transmitter, Supercardioid Dynamic

Microphone capsule , 24-bit digital audio, Extended 20 Hz to 20 kHz frequency

range, 118 dB dynamic range, Digital predictive switching diversity, 44 MHz

tuning bandwidth, 32 available channels per frequency band, Up to 10 compatible

systems per 6MHz TV band; 12 systems per 8 MHz band, RF Carrier Frequency

Range: 470–937.5 MHz, Working Range 100 m (328 ft), Network Interface, RF

Power: 10 mW, Antenna Type: Integrated Single-Band Helical, Up to 8 hours

from 2 AA batteries or rechargeable battery etc all complete

SITC of Wireless System with Beltpack Transmitter, Omnidirectional Condenser

Lavalier Microphone , 24-bit digital audio, Extended 20 Hz to 20 kHz frequency

range, 118 dB dynamic range, Digital predictive switching diversity, 44 MHz

tuning bandwidth, 32 available channels per frequency band, Up to 10 compatible

systems per 6MHz TV band; 12 systems per 8 MHz band, RF Carrier Frequency

Range: 470–937.5 MHz, Working Range 100 m (328 ft), Network Interface, RF

Power: 10 mW, Antenna Type: Integrated Single-Band Helical, Up to 8 hours

from 2 AA batteries or rechargeable battery etc all complete

SITC of 12" Gooseneck Condenser Microphone, Inline Pre-Amp, Mute Switch,

Light-Ring, Cardioid, Electret Condenser, Frequency Response 70–16000 Hz,

Output Impedance: 180 Ω, Maximum SPL: 120 dB SPL, Dynamic Range: 93 dB

etc all complete

Digitally signed by AMIT

SITC of Audio, Video and Control (AV&C) Processor, 64 x 64 networked audio

channels, 8x on-board Flex channels and GPIO, Full-featured Control engine

(with feature license), 8 AEC Processors, up to 32 x 32 Dante audio channels (8

x 8 included), USB AV bridging (8 x 8 audio + Camera support), Full-featured Q-

SYS Control engine (with optional feature license), External USB audio device

host, Up to 2x VoIP instances etc all complete

SITC of Fully Integrated Audio, Video and Control Solution, 128 Networked Audio

Channel, 24 Channels of analog I/O, including 8 configurable Flex channels, 16

AEC Processor, Up to 32 x 32 Dante audio channels (8 x 8 included), USB AV

bridging (16 x 16 audio + Camera Support), Full-featured Control engine (with

Feature License), Up to 4x VoIP Instances, External USB audio device host etc

SITC of 6.5-inch, 2-Way Ceiling Speaker, Rated Power: 60W, Frequency Range:

65 Hz – 20 kHz, Sensitivity: 88 dB, Rated Coverage 135° conical DMT, Maximum

34 continuous SPL 106 dB, Nominal impedance: 8 / 16 Ohm, Transformer taps: No's 30 22,523.23 675,696.97

60W / 30W / 15W at 100 / 70V, IP-34 Rated, Low-saturation and low-loss

70/100V transformers with 16Ω bypass, UL and CE Certified etc all complete

SITC of 4.5-inch, Full Range Ceiling Speaker, Rated Power: 16W, Frequency

Range: 70 Hz – 16 kHz, Sensitivity: 89 dB, Rated Coverage 140° conical,

35 Maximum continuous SPL 101 dB, Nominal impedance: 8 / 16 Ohm, Transformer No's 8 22,166.35 177,330.80

taps: 16W / 8W / 4W at 100 / 70V, 70/100V transformers with 8Ω bypass, UL

Certified etc all complete

SITC of 8 Channel Class-D Amplifier, Power (per channels driven): 200 W at 8 Ω

/ 4 Ω / 100V / 70V, FlexAmp Technology, Frequency Response: 20 Hz – 20 kHz,

Signal to Noise > 103 dB, Input impedance >10k, balanced or unbalanced, User-

configurable operating modes, UL, CE, RoHS/WEEE compliant etc all complete

SITC of 4 Channel Class-D Amplifier, Power (per channels driven): 200 W at 8 Ω

/ 4 Ω / 100V / 70V, FlexAmp Technology, Frequency Response: 20 Hz – 20 kHz,

Signal to Noise > 103 dB, Input impedance >10k, balanced or unbalanced, User-

configurable operating modes, UL, CE, RoHS/WEEE compliant etc all complete

SITC of Energy Star Class D Dual Channel Power Amplifier, 60 watts per

channel into 4 and 8 ohms, Bridged Mode Watts per channel: 200 W at 8 Ω & 4

Ω, 250 W at 70 V & 100 V, Signal to Noise (A weighted, 20 Hz-20 kHz) >100 dB,

Highpass Filter Switchable 80 Hz when Bridged in 70V & 100V etc all complete

SITC of Expension Module for RS232 / Communication Port, Gigabit LAN, Four

39 bi-directional RS232 serial ports, Power over Ethernet (PoE) capable etc all No's 2 99,940.00 199,880.00

Digitally signed by AMIT

SITC of 10.2" Apple iPad LED-backlit Multi-Touch display with IPS technology

with User Control Interface (UCI) Deployment etc all complete

SITC of Apple docking and charging station with all required accessories etc all

SITC of 8-Port Gigabit PoE+ Ethernet Smart Switch with 2 SFP Ports and Cloud

Management etc all complete

SITC of 16-port Gigabit Ethernet High-Power PoE+ Smart Switch with 2 SFP

Ports and Cloud Management etc all complete

44 SITC of Wireless Access Point etc all complete No's 3 27,866.00 83,598.00

Digitally signed by AMIT

SITC of 1 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to

18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High Dynamic

Range (HDR10), Dolby Vision and Hybrid log–gamma (HLG) video etc all

SITC of 2 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to

18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High Dynamic

Range (HDR10), Dolby Vision and Hybrid log–gamma (HLG) video etc all

SITC of 5 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to

18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High Dynamic

Range (HDR10), Dolby Vision and Hybrid log–gamma (HLG) video etc all

SITC of 12.5 Meter Active Copper HDMI Cable, Data Rate: Up to 18.2Gbps,

Colour Depth: Up to 16 bits, Colour Formats: RGB 4:4:4 / Y’CBCR 4:2:2 /

48 Y’CBCR 4:2:0, Consumer Electronic Control (CEC), Auto Lip-Sync Correction, No's 86 12,276.31 1,055,763.06

Audio Return Channel (ARC), Enhanced Audio Return Channel (eARC), High

Dynamic Range (HDR) etc all complete

SITC of 15 Meter Active Copper HDMI Cable, Data Rate: Up to 18.2Gbps, Colour

Depth: Up to 16 bits, Colour Formats: RGB 4:4:4 / Y’CBCR 4:2:2 / Y’CBCR 4:2:0,

Consumer Electronic Control (CEC), Auto Lip-Sync Correction, Audio Return

Channel (ARC), Enhanced Audio Return Channel (eARC), High Dynamic Range

(HDR) etc all complete

SITC of 1 Meter USB Full-Featured Type-C cable for USB 3.1 Gen2, 4 Lane

Displayport Alt mode (4K60FPS Video and Audio), Supporting peripherals via

USB 2.0 up to 480 Mbps (Mouse, Keyboard, Thumb Drive, Speakerphone and

Webcam) etc all complete

SITC of 2 Meter USB Full-Featured Type-C cable for USB 3.1 Gen2, 4 Lane

Displayport Alt mode (4K60FPS Video and Audio), Supporting peripherals via

USB 2.0 up to 480 Mbps (Mouse, Keyboard, Thumb Drive, Speakerphone and

Webcam) etc all complete

SITC of 10 Meter USB 3.1 Gen1 SuperSpeed Active Extension Cable

TypeA/male to TypeA/female, Supports 4K Webcam, SSD storage, Native

USB2/USB1 and USB3 extension, Plug and play compatible with PC, Mac, and

Linux etc all complete

SITC of Microphone Cable, 2 Conductor 22 AWG Tinned Copper, PE Insulation,

53 85% Tinned Copper Braid Shield, Cotton Braid, PVC Jacket (as per actual) etc all Meter 600 237.50 142,500.00

Digitally signed by AMIT

SITC of 2 Conductor 16 AWG Speaker Cable, stranded Bare copper conductors,

PVC/Nylon insulation, PVC jacket (as per actual) etc all complete

SITC of Category 6A Cable, 4 Pair, S/FTP, PVC jacket (as per actual) etc all

56 SITC of Various Cables & Connectors etc all complete No's 24 18,525.00 444,600.00

SITC of 16U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly, on

Top of the Rack, 4 Caster wheels, 2 no Shelfs to mount the equipments which

are not rack mounted, 8X2, 5/6 Amp. Power Distribution Unit, Cable Manager &

Sufficient Rack hardwares etc all complete

SITC of 24U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly, on

Top of the Rack, 4 Caster wheels, 2 no Shelfs to mount the equipments which

are not rack mounted, 8X2, 5/6 Amp. Power Distribution Unit, Cable Manager &

Sufficient Rack hardwares etc all complete

SITC of teleprompter built in monitor 15', in free standing/ standalone, rugged

case powered with power supply or with V-lock battery, HDMI Ethernet cable,

59 monitored and controlled through router, installed teleprompter app,as per No's 2 134,524.00 269,048.00

selection of client/ EIC

60 SITC of 21" display with signage option over LAN with all required accesiories No's 4 51,250.00 205,000.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - GAS SUPRESSION SYSTEM

MR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

MR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Gas Suppression System

SITC of 120 Ltrs. Cylinder with Valve & Warning Sign Boards (42 Bar VDS / UL

Approved System)

M.R. 5 SITC of Master Cylinder Accessories: (Single Cylinder)

M.R. * Pr. Guage + Low Pr. Supervisory Switch

M.R. * Electromagnetic Actuator

M.R. * Pneumatic Actuator

M.R. * Flexible Discharge Hose

M.R. * Flexible Actuation Hose

M.R. * Manual Pneumatic Actuator

M.R. * Union 7/16 JIC 1/8

M.R. 6 SITC of Nozzles Nos. 3 7,689.00 23,067.00

M.R. 7 SITC of MS SCH 40 Seamless Pipes Lot 1 76,889.00 76,889.00

M.R. 8 SITC of 2 Zone Fire Alarm Cum Gas Release Module with 7AH x 2 Batteries No.s 1 31,455.00 31,455.00

SITC of UL Listed FM Approved Listed Conventional Smoke Detectors with Base with 3

LED Color Indication

M.R. 10 SITC of Response Indicators Nos 2 105.00 210.00

M.R. 11 SITC of Abort Switch No.s 1 2,516.00 2,516.00

M.R. 12 SITC of Release Switch No.s 1 2,516.00 2,516.00

M.R. 13 SITC of Hooter with Strobe No.s 1 2,516.00 2,516.00

M.R. 14 SITC of 2 Core 1.5 Sqmm Armoured Cable Mtrs 100 133.00 13,300.00

Digitally signed by AMIT

Schedule of Quantities: Furniture

S No Specification Location Unit Rates in (Rs.) Amount Reference Image

1 Medium back Chair 404 nos 12065 4874260

Supplying and placing in position of 360 degree Revolving medium back chair of

Dimension (W)585mm X (D)660mm X (H)1060mm as per image . Ergonomically designed, Reception area: 14nos/

it features a breathable mesh backrest and adjustable lumbar support to provide you all-day pps visitor: 16nos/

comfort. it offers Synchro Single Locking Mechanism along with a Tilt Tension Control. The visitor ps to advisor: 28nos /

fixed armrest provide deluxe comfort while the strong nylon base . The 55mm castor wheels ps to secretary: 4 nos /

and a 360-degree swivel provide swift yet stable movement.High-quality fabric upholstery ps to chairman: 4nos/

with high abrasion-resistance and superior tear strength & colourfastness,Premium high- visitor for SRO: 44nos /

density virgin foam for comfortable seating, High stability chair with no-tip over, clearing drop visitor for SO: 92nos /

test of 102kgs,Adjustable Lumbar Support for superior back support,Pneumatic Height Lift visitor for TO: 56nos/

with Class IV gas lift,Adjustable headrest with Synchro Single Locking and Tilt tension Workstation chair: 179 nos /

control for improved mobility..The product should be as per above given specification under Meeting chair for PS member

the guidance of project Engineer in charge. cabin: 4nos/

Librain chair: 1no

2 Back Storage

Dimension: 2400mm(L) x 450mm(D) x 750mm(H) 4 nos 33120 132480

Dimension: 1450mm(L) X 450mm(D) x 750mm(H) 4 nos 19872 79488

Supplying, and placing in position of medium height storage @ 750mm height as per

photograph/drawing . The storage unit having Openable shutters with shelf in it. The

modular storage unit top shall be made from 18 mm thick pre-laminated particle board and

rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated

particle board while back to be made of 8 mm thick pre-laminated particle board. All edges

to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters with

D shape handles & locking arrangement..The product should be as per above given

specification under the guidance of project Engineer in charge.

Reception area: 13 nos/

lounge area: 8nos /

Recreation area : 2nos/

PRA Cabin: 16nos/

MSP Cabin: 2nos/

Executive lounge: 4nos/

1 Seater Dimension(L)850mm X (D)750mm X (H)710mm 100 nos 28369 2836900

Member Cabin: 4nos/

Advisor Cabin: 14nos/

JA Cabin: 19nos/

DA Cabin: 25nos/

PS to Chairman Cabin: 1nos/

Secretary Cabin: 2nos

lounge area: 4nos /

Executive lounge: 4nos/

2 seater Dimension : (L)1650mm X (D)750mm X (H)710mm JA Cabin: 19nos/ 50 nos 41517 2075850

DA Cabin: 25nos/

Secretarty Cabin: 2nos

Reception area: 1nos/

lounge area: 2nos /

MSP Cabin: 2nos/

3 seater Dimension : (L)1650mm X (D)750mm X (H)710mm PRA Cabin: 8nos/ 30 nos 51398 1541940

Member Cabin: 2nos/

Prefunction area: 6nos

Supplying, and placing in position of sofa as per Image A supple Camel Brown premium

Leatherette upholstery adds class to the soft cushioned backrest and seating. Sitting proudly

on sleek steel legs the sofa exudes a sense of comfort that is perfect for any space. Material

& subtype:Premium Leatherette, Colour & Colour Family:Brown-Camel Brown, Seating

Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two

Tone. steam beech solid wood have used for framing construction of sofa .The seat

cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have

2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting

stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200

gsm. The polyster polyfill keeps the upholstery wrinke free & soft.The product should be as

per above given specification under the guidance of project Engineer in charge.

Digitally signed by AMIT

Dimension: Dia 600mm x 600mm(H) 105 nos 12065 1266825

Supplying, and placing in position of side table as per Image. The side tablare made of solid

wood. The clear round table top is made from 10mm thk tempered glass for everyday use. Reception cum lounge area:

The glass top is supported by beautiful wooden legs made from solid beech wood with a 21nos/ PRA

glossy walnut brown finish. The side table have Solid Beech wood base with Round shape Cabin: 16nos/

10mm thk Tempered Glass Table Top. Colour: Walnut brown colour with a glossy finish. Advisor Cabin: 26nos/

.The product should be as per above given specification under the guidance of project JA Cabin: 19nos /

Engineer in charge.. DA cabin: 25 nos

Recreation area: 2nos

/Member Cabin: 4nos

Secreatary Cabin: 6nos

5 Center Table

Dimension: (L)1000mm x (W)600mm x (H)400mm 70 nos 20217 1415190

Supplying, and placing in position of centre table as per Image . Contemporary chic design Reception cum lounge waiting

centre table.Rectangular clear tempered glass top.Inbuilt metal rods on both the side of the area: 7nos/

wooden base.Froasted glass shelf.Material & Subtype:Glass -8mm thk Tempered Glass, PRA Cabin: 8nos/

Colour & Colour Family:Black, Shape:Rectangular, Finish:Glossy. .The product should be Advisor Cabin: 14nos/

as per above given specification under the guidance of project Engineer in charge. JA Cabin: 19 nos /

DA cabin: 25 nos

/Member Cabin: 2nos

Secreatary Cabin: 1nos

6 Small Meeting room

small meeting room: 1nos /

Dimesnion: Dia: 1200mm x 750mm(H) 17 nos 30493 518381

Prefunction Hall: 16nos

small meeting room: 3nos /

Dimesnion: Dia: 900mm x 750mm(H) 4 nos 27088 108352

PS to Member cabin: 1nos

Supplying, and placing in position of dicussion table as per image/ drawing . The table made

out of 25mm thk Prelam particle board with 2mm thk Pvc edge banding. The table top

supported with MS powder coated pole with flat round plate. The working and non working

edges shall be finished with machine pressed with 2mm PVC egdge banding. .The product

should be as per above given specification under the guidance of project Engineer in

7 Meeting room Chair 18 nos 8831 158958

Supplying and placing in position of 360 degree reloving medium mesh back chair as per

image. The Mesh back has a central console that provides excellent lower back support for

improved ergonomics. The seat cushion is upholstered in soft black fabric rests firmly on a

nylon base powered by nylon castors. The front facia of the chair is full of poise with its

sturdy arms and detached back. Material & Subtype:Mesh, Colour & Colour Family:Black,

Dimension(W)625mm X (D)450mm X (H)920mm, Back Type:Low Back, Base:Nylon Base,

Base Type:Revolving, Maximum Seating Height:20.47", Minimum Seat Height:16.73", Small Meeting room : 18nos

Function:Revolving::Pneumatic Height Lift::Tilt Tension Control::Push Back, Locking

Mechanism:Push Back. The pneumatic height adjustment shall have adjustment stroke of

75mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk

hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of

density 32-35kg/m3..The product should be as per above given specification under the

guidance of project Engineer in charge.

Digitally signed by AMIT

8 Meeting Table

Dimension: (W) 8250mm x (D) 600mm x (H)750mm (overall depth 2250mm) 2 nos 548558 1097116

Supplying and placing in position of conference table as per image/drawing. The work

surface top should be of thickness 36mm top prelaminated particle board with 2mm thick

PVC edge banding. The side panel are made up of 32mm thick prelaminated particle &

modesty panel are made out of 25mm thick prelaminated particle board with 2mm thick PVC Meeting Room Secretary : 1nos/

edge banding. The wire carrier should be made from 0.6mm thick CRCA & powder coated Meeting room chairman: 1nos

40-50 microns. Also having a provision of 6 module flip top box (8 nos) & metal raceway

for wire flow. .The product should be as per above given specification under the guidance of

project Engineer in charge. Note: Cut out to be done at site as per requirement

9 Main Chair 2 nos 26324 52648

Supplying and placing in position of 360 degrees revolving high back chair as per

photograph. The chair of Size :-(W)590mm X (D)505mm X (H)1180mm - 1280mm. The

chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR

plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The

leatherette upholstery in the chair has the look and feel of top grain leather. The chrome Meeting Room Secretary : 1nos/

plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be Meeting room chairman: 1nos

provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five

star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3)

Dimensions The backrest has a foam of 28kg/m3. The product should be as per above

given specification under the guidance of project Engineer in charge.

10 Visitor Chair 44 nos 22163 975190

Supplying and placing in position of 360 degrees revolving medium back chair as per

photograph. The Craze chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm.

The chair shall be ergonomically design contour lumbar back design made of 12mm thick

BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam.

The leatherette upholstery in the chair has the look and feel of top grain leather. The chrome Meeting Room Secreatary : 22nos/

plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be Meeting room chairman: 22nos

provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five

star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3)

The backrest has a foam of 28kg/m3. The product should be as per above given

specification under the guidance of project Engineer in charge.

11 Visitor Chair 40 nos 20804 832160

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X

(D)505mm X (H)990mmas per Image.A contemporary design with an all black finish, the

chair is a staple in every office setting. A double padded cushion encased in an all black

premium leatherette makes for one comfy seat. The side padding and the headrest sit

snugly providing added lumbar support to the user. Available in multiple formats to suit your

Meeting Room Secreatary : 20nos/

individual needs. Material & subtype:Premium Leatherette, Colour & Colour Family:Black,

Meeting room chairman: 20nos

Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever, Base:Cantilever

Frame, Base Type:Cantilever, Maximum Seating Height:19".The Seat & back are made up

of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat

has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3.The product should

be as per above given specification under the guidance of project Engineer in charge.

Digitally signed by AMIT

Main Table Dimesnion: (L)2300mm x (D)900mm x (H)750mm

All over Side Runner Dimension: (L)1940mm x (D)450mm x (H)650mm

Supplying, and placing in position of a straight line table with wire manager as per

photograph/drawing. The main desk shall be made out of 42mm thick pre laminated

particle board with the approved shade. Table top supported with side panels and modesty

panel. The side panels made out of 42mm thick pre laminated Particle board & modesty

panel made out of 36mm thk pre laminated Particle board of approved shade. All working

or non working edges shall be provided with machine pressed 2mm thick PVC edging using

special hot melt glue at hot temperature. Provision of Pop-up - cable manager box in the PRA Cabin: 8nos /

table .The Fixed Side Runner attached to the table of all over size 1940mm (L) x 450mm (D) Member Cabin: 2nos/

x 650mm (H) has a provision for three drawer with locking facility , two openable shutters Secreatary Cabin: 1no

with locking arrangement , open storage with shelf & one open storage for cpu.The

another side panel of table top having a provision of two attached drawer as per photograph.

The table top rest on SS studs for design purpose same as per image.The product should

be as per above given specification under the guidance of project Engineer in charge. Note:

Cut out to be done at site as per requirement & provision of snake pole is also

Digitally signed by AMIT

13 Back Storage

Dimension: 2100mm(L) x 450mm(D) x 750mm(H) 11 nos 28980 318780

Supplying, and placing in position of medium height storage @ 750mm height as per

photograph/drawing . The storage unit having Openable shutters with shelf in it. The

modular storage unit top shall be made from 18 mm thick pre-laminated particle board and

PRA Cabin: 8nos /

rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated

Member Cabin: 2nos/

particle board while back to be made of 8 mm thick pre-laminated particle board. All edges

Secreatary Cabin: 1no

to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters with

D shape handles & locking arrangement.The product should be as per above given

specification under the guidance of project Engineer in charge.

14 Main Chair 22 nos 30570 672540

Supplying and placing in position of 360 degrees revolving high back chair as per image.

The Leatherette office chair of size:- (W)655mm X (D)500mm X (H)1230mm is a ergonomic

high back chair made for a business tycoon or a director. The seat is constructed from a

combination of resilient plywood and soft foam for a comfortable seat. The foam cushions

are encased in a chocolate brown leatherette upholstery. The seat arms come padded with

foam and are covered in the same brown upholstery for a relaxed armrest. Powered by a

synchro multi locking mechanism the chair offers you extreme comfort as per your seating

PRA Cabin: 8nos /

position. The office seat is supported by a shiny chrome base powered by sturdy nylon

Advisor Cabin: 14nos

castors. Function: Revolving::Pneumatic Height Lift::Tilt Tension Control::Synchro single

locking, Base: Chrome Base, Locking Mechanism: Synchro single locking. The pneumatic

height adjustment shall have adjustment stroke of 100mm and shall be operated at 30kgs

extension force. The Seat and back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 38-40 kg/m3 .

The backrest has a foam of 28 (+/-2kg /m3 ).The product should be as per above given

specification under the guidance of project Engineer in charge.

15 Visitor Chair 60 nos 28022 1681320

Supplying and placing in position of 360 degrees revolving medium back chair as per image.

The Leatherette office chair of size:- (W)555mm X (D)500mm X (H)1105mm is a ergonomic

low back chair made for a business tycoon or a director. The seat is constructed from a

combination of resilient plywood and soft foam for a comfortable seat. The foam cushions

are encased in a chocolate brown leatherette upholstery. The seat arms come padded with

foam and are covered in the same brown upholstery for a relaxed armrest. Powered by a

PRA Cabin: 24nos /

synchro multi locking mechanism the chair offers you extreme comfort as per your seating

Advisor Cabin: 42nos

position. The office seat is supported by a shiny chrome base powered by sturdy nylon

castors. The pneumatic height adjustment shall have adjustment stroke of 100mm and shall

be operated at 30kgs extension force. The Seat and back are made up of 12mm thk hot

pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of

density 38-40 kg/m3 . The backrest has a foam of 28 (+/-2kg /m3 )The product should be as

per above given specification under the guidance of project Engineer in charge.

Digitally signed by AMIT

16 Meeting table

Dimension: 1050mm(Dia) x 750mm(h) PRA Cabin: 8nos 8 nos 39231 313848

Member Cabin: 2nos/

Dimension: 1200mm(Dia) x 750mm(h) 3 nos 44836 134508

Secretary Cabin: 1nos

Supplying and placing in position of Round Meeting table as per photograph. The Table

having capacity of 4 seats. The Table top shall be made out of 25mm thick prelam particle

board of approved shades. The table top shall be supported on 18mm thick understructure

made with prelaminated particle board with pvc edges.. The working or nonworking edges

shall be provided with matching machine pressed 2mm thick PVC edging using with special

hot melt glue at hot temperature.The product should be as per above given specification

under the guidance of project Engineer in charge.

17 Medium Back Chair 135 nos 13926 1880010

Supplying and placing in position of 360 degrees revolving medium back chair as per

photograph. The breathable mesh back chair with cushioned fabric seat shall be

ergonomically design with adjustable lumbar back support . The chair shall be provisioned

PRA meeting : 28nos/

with adjustable armrest (Up-Down) with PP padding and Adjustable Headrest(Can Adjust

PA to Chairman visitor: 3nos

Movement). The seat cushion to be upholstered on 10-12mm thick water proof plywood and

JA Cabin: 38nos/

moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade -

DA Cabin: 50nos/

303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

Meeting chair for Secreatary :

provided with self tension single locking mechanism and pneumatic height adjustment which

6nos/ Visitor chair

shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon

ps to Member: 4nos/

castors..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

Meeting chair member cabin:

be operated at 30kgs extension force.The Seat are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35

kg/m3. The product should be as per above given specification under the guidance of

project Engineer in charge.

Main Table Dimension: (L)2000mm x (D)1000mm x (H)750mm

Side Runner Dimension: (L)1200mm x (D)450mm x (H)750mm

Supplying, and placing in position of main Table as per Image/ drawing.The Table top made

out of 36mm thk prelam particle board with 2mm thk pvc edge banding & side panel &

modesty panel made up of 25mm thick pre-laminated particle board .The working edges

shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue

at hot temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-

600mm) attached to the table top. Pedestal Unit have a combination of 2 drawer & one

filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle

board with provision of handles & central Locking arrangement. The table have a provision

Advisor Cabin: 14nos

of free standing Side Storage of size 1200mm L x 450mm D x 750mm Ht., Storage Top

made out of 18mm thick pre laminated particle board and rest all storage to be made out of

18 mm thick prelaminated particle board . All exposed edges shall be provided with machine

pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Storage having a provision of

3 drawer unit, one openable shutter with D shape handle & central locking arrangement,

one open storage with shelf in it . The product should be as per above given specification

under the guidance of project Engineer in charge. Note: Cut out to be

done at site as per requirement & provision of snake pole is also considered)

Digitally signed by AMIT

19 Back Storage

Dimension: 2000mm(L) X 450mm(D) x 750mm(H) 14 nos 27324 382536

Supplying, and placing in position of medium height storage @ 750mm height as per

photograph/drawing . The storage unit having Openable shutters with shelf in it. The

modular storage unit top shall be made from 18 mm thick pre-laminated particle board and

rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated

Advisor Cabin: 14nos

particle board while back to be made of 8 mm thick pre-laminated particle board. All edges

to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters with

D shape handles & locking arrangement.The product should be as per above given

specification under the guidance of project Engineer in charge.

Main Table Dimension (L)1800mm X (D) 900mm X (H)750mm JA Cabin: 19nos /

Side Runer Dimension (L)1200mm x (D) 450mm x (H) 750mm DA Cabin: 25nos/

Main Table Dimension (L)2100mm x (D) 900mm x (H)750mm

b MSP Cabin: 2nos 2 nos 108353 216706

Side Runer Dimension (L)1200mm X (D) 450mm X (H) 750mm

Supplying, and placing in position of main Table as per Image/ drawing.The Table top made

out of 32mm thk prelam particle board with 2mm thk pvc edge banding & side panel &

modesty panel made up of 25mm thick pre-laminated particle board .The working edges

shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue

at hot temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-

600mm) attached to the table top. Pedestal Unit have a combination of 2 drawer & one

filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle

board with provision of handles & central Locking arrangement. The table have a provision

of free standing Side Storage of size 1200mm L x 450mm D x 750mm Ht., Storage Top

made out of 18mm thick pre laminated particle board and rest all storage to be made out of

18 mm thick prelaminated particle board . All exposed edges shall be provided with machine

pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Storage having a provision of

3 drawer unit, one openable shutter with D shape handle & central locking arrangement,

one open storage with shelf in it . The product should be as per above given specification

under the guidance of project Engineer in charge. Note: Cut out to be done at site as per

requirement & provision of snake pole is also considered)

21 Back Storage

JA Cabin: 19nos /

Dimension: 1800mm(L) x 450mm(D) x 750mm(H) 40 nos 24840 993600

DA Cabin: 25nos/

Dimension: 2100mm(L) X 450mm(D) x 750mm(H) MSP Cabin: 2nos 2 nos 28980 57960

Supplying, and placing in position of medium height storage @ 750mm height as per

photograph/drawing . The storage unit having Openable shutters with shelf in it. The

modular storage unit top shall be made from 18 mm thick pre-laminated particle board and

rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated

particle board while back to be made of 8 mm thick pre-laminated particle board. All edges

to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters with

D shape handles & locking arrangement.The product should be as per above given

specification under the guidance of project Engineer in charge.

22 Main Chair 42 nos 15370 645540

Digitally signed by AMIT

Supplying and placing in position of 360 degrees revolving high back chair as per

photograph. The breathable mesh back chair with cushioned fabric seat shall be

ergonomically design with adjustable lumbar back support . The chair shall be provisioned

with adjustable armrest (Up-Down) with PP padding and Adjustable Headrest(Can Adjust

Movement). The seat cushion to be upholstered on 10-12mm thick water proof plywood and

moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - JA Cabin: 19nos /

303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be DA Cabin: 25nos/

provided with self tension single locking mechanism and pneumatic height adjustment which PA to Chairman Cabin: 1nos/

shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon PS to Member: 2nos

castors..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot

pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of

density 32-35 kg/m3. The backrest has a foam of 28kg/m3. The product should be as per

above given specification under the guidance of project Engineer in charge.

Main Table Dimension (L)1800mm X (D) 900mm X (H)750mm

Side Runer Dimension (L)1200mm X (D) 450mm X (H) 750mm

Supplying and placing in position of main table as per photograph/drawing .The table shall

be made out of 25mm thick pre -laminated particle board of approved shade. The working

and non working edges shall be finished with machine pressed with 2mm PVC egdge

banding. The table top shall be supported with MS powder coated "C" shape leg of size

50mm x 50mm with connectors of size 40mm x 40mm. The front modesty are made out of

18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table shall be PPS Cabin: 8nos /

provisioned with free standing Side unit of size: 1200mm(L) x 450mm(D) x 750mm(H) . Side PS to Advisor Cabin: 14nos/

storage having a provision for three equal drawer unit and two openable shutter with shelf PS TO Secretary Cabin: 2nos /

in it. The Side unit top shall be made out of 18mm thick pre laminated particle board and PS to Chairman Cabin: 2nos

rest all storage to be made out of of 18mm thick pre laminated particle board. Provision of

Junction box , wire raceway and 6 module fliptop box for wire passing. The product should

be as per above given specification under the guidance of project Engineer in charge. Note:

Cut out to be done at site as per requirement & provision of snake pole is also

24 Low Height back/ side Storage

Dimension:(W) 1600mm X (D) 450mm X (H) 750mm 9 nos 21942 197478

Dimension: (W) 2700mm X (D) 450mm X (H) 750mm 7 nos 37260 260820

Dimension: (W) 2100mm X (D) 450mm X (H) 750mm 1 nos 28980 28980

Dimension:(W) 1200mm X (D) 450mm X (H) 750mm 6 nos 16560 99360

Dimension: (W) 1050mm X (D) 450mm X (H) 750mm 1 nos 14490 14490

Dimension: (W) 1800mm X (D) 450mm X (H) 750mm 5 nos 24840 124200

Dimension:(W) 2800mm X (D) 450mm X (H) 750mm 2 nos 38502 77004

Dimension:(W) 1370mm X (D) 450mm X (H) 750mm 2 nos 18630 37260

Dimension:(W) 3300mm X (D) 450mm X (H) 750mm 1 nos 45940 45940

Supplying, and placing in position of medium height storage @ 750mm height as per

photograph/drawing . The storage unit having Openable shutters with shelf in it. The

modular storage unit top shall be made from 18 mm thick pre-laminated particle board and

rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated PPS/ PS to Advisor/PS TO

particle board while back to be made of 8 mm thick pre-laminated particle board. All edges Secretary/PS to Chairman Cabin

to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters with

D shape handles & locking arrangement. The product should be as per above given

specification under the guidance of project Engineer in charge.

Dimension:(W)650mm X (D)500mm X (H)460mm 1 nos 12907 12907

Supplying and placing in position of Side table as per photograph., the collection is destined

to become a centerpiece of your modern Indian homes. Perching on solid wood trestle legs,

the veneer tabletop is tastefully adorned with a brick pattern, crafted to perfection by skilled

Marquetry artisan Material & Subtype:Veneer/Solid Wood - Steam Beech Wood,Leg PS to Chairman Cabin: 1nos

Material:Solid Wood, Finish:Matte Colour & Colour FamilyBrown - Wenge. The product

should be as per above given specification under the guidance of project Engineer in

Main Table Dimension (L) 2000mm X (D) 950mm X (H)750mm

Side Runer Dimension (L)1400mm X (D) 400mm X (H) 660mm

Digitally signed by AMIT

Supplying, and placing in position of table as per photograph. Primary work surface 50mm

thick table top made of prelaminated particle board work surface with glossy walnut finish

same matching edge banding made of same matte finish. Side panel is made of 45mm

thick. Provision of side runner/a of size is 1200mm(l)x 400mm(d)x 660mm(h), (construction

is 1 openable door + 1 open shelve for CPU back side have 3 holes, in between both 1 key

board tray with telescopic channel& 1 open box storage (l) 550mm x (h) 350mm from down PA to Chairman Cabin:1no

1-drawer. 2 drawers’ mobile pedestal of size 400mm(l)x 480mm(d)x 550mm(h), having 2

drawers with castors in provided with central lock for security and given curved shaped

upper drawer are provided for easy of opening. Overall construction of pedestal is 18 mm

along with facia of drawers.The product should be as per above given specification under

the guidance of project Engineer in charge.

Main Table Dimension: 1500mm(L) X 600mm(D) x 750mm(H)

Side Runner Dimension: 900mm(L) X 450mm(D) x 750mm(H)

Providing and placing of main table as per image/drawing. Table top are made up of 25mm

thick pre-laminated particle board and understructure shall be made of 18mm thick

prelaminated particle board gable ends and modesty panels. The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot

temperature. Provision of one CPU trolley and PVC keyboard tray attached to the table top. SRO Cabin: 22nos /

The table shall be provisioned with free standing Side Storage of size 900mm L x 450mm D TO Cabin: 28nos /

x 750mm Ht., Storage Top are made out of 25mm thick pre laminated particle board and SO Cabin: 46nos

rest all storage to be made out of 18 mm thick prelaminated particle board . Storage having Doctors Roon: 1no

a sliding shutter with D shape handles and central locking arrangement. All exposed edges

shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA

glue. The product should be as per above given specification under the guidance of project

Engineer in charge.

28 Back Storage

Dimension: (L) 1500mm X (D) 450mm X (H)750mm 23 nos 20700 476100

Digitally signed by AMIT

Supplying , and placing in position of storage as per photograph/drawing. The complete

storage unit shall be made up of 18 mm thick prelam particle board with 2mm thk pvc edge

banding . The storage shall be provisioned with shelves and 2 nos compartments .The

storage shall have openable shutters with handles and locking arrangements. The product SRO Cabin: 22nos /

should be as per above given specification under the guidance of project Engineer in Doctors Roon: 1no

29 Linear Workstation

Dimension: (L)1200mm x (D) 600mm D) x (H) 1050mm 160 nos 39312 6289920

Supplying, and placing in position of linear workstation as per Image.The worktop made out

of 25mm thk. Prelam Particle board with 2 mm thk PVC edge banding.The Table top

supported on Mild Steel of size 50mm x50mm Slanted Leg and 50mm x 25mm Horizontal

connectors with Powder coating of 50 Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on

both side of the "T" leg for Vertical wire carrying purpose.(Sharing Workstation). 0.8 mm thk

Single/Double metal powder coated raceway with Powder coating of 50 Micron below top for

wiring.Vertical wire carrying pole with powder coating 50 micron below top for wiring( Non-

sharing workstation ). Also having a provision of ms perfoated sheet hanging modesty.

provision of glass divider rest on the "D" brackets on the table top between opposite

seatings. All working or non working edges shall be provided with machine pressed 2mm

thick PVC edging using special hot melt glue at hot temperature. Provision of pullout PVC

keyboard tray and CPU trolley for each seating. Also a provision of Pedestal Unit (size:- L-

400mm x D-450mm x H-600mm) with a combination of 2 drawer & one filing drawer. The

pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with

provision of handles & Locking arrangement. The product should be as per above given

specification under the guidance of project Engineer in charge.

30 Chair for Pre-function Hall 108 nos 8100 874800

Supplying and placing in Position of stackable chair as per Image. The chair of size :-

(W)500mm X (D)530mm X (H)840mm is a curious one. The block panelled back and

waterfall seat cushions make this chair a classy addition to the workspace. An all metal

construction with an exposed chrome frame gives it a sleek look.The Seat & back are Pre funtion Hall: 96nos/

made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, Library area: 12nos

chair seat has foam of density 30-32kg/m3. The backrest has a foam of 28kg/m3.The

product should be as per above given specification under the guidance of project Engineer

31 Single Bed (without mattress)

Dimension: (L)900mm X (W)2130mm X (H)850mm 4 nos 31408 125632

Supplying and placing in position of single bed as per photograph/Drawing. single bed for

the contemporary home. Whether you're single and living alone in a new city or getting the

first bed for your kid, this is the bed you need. Clean minimal design made of straight lines

coupled with durable engineered wood is the basis for its looks. A central supporting frame

adds sturdiness and also separates the space below equally incase you wish to stove away Guest Room: 2nos /

anything underneath. Material& subtype:Engineered Wood - Particle Board, Colour & Colour Creche room: 2nos

Family:Brown - Wenge, Finish:Matte, Size:Single Bed, Style:Contemporary. complete

structure are made out of 25mm thk prelam particle board

32 Bed Side table

Dimension: (L) 500mm X (W) 450mm X (H) 450mm 4 nos 7218 28872

Supplying, and placing in position of bed side table as per image/ drawing . The bed side

table are made up of 18mm thick Prelaminated Particle Board. All the exposed edges are

edge banded with 2 mm thick PVC edge banding. Side panels are made of 18 mm thick

Prelaminated Particle board with 2mmthk pvc edge banding . The bed side table having a

provision of one drawer with open shelf in it. The product should be as per above given Guest Room: 2nos /

specification under the guidance of project Engineer in charge. Creche room: 2nos

Dimension: (L) 1450mm X (W) 600mm X (H) 750mm 2 nos 36220 72440

Supplying, and placing in position of table with 1 Drawer as per image . The table top and

Gable End are made out of 25mm thick Pre-laminated Particle board with 2mm thk pvc

edge banding. Modesty, Vertical, Drawer of size 400mm (L) X 450mm (D) X 120mm(H). are

Guest Room: 1nos /

made out of 18mm thick Pre-laminated Particle board. All exposed edges sealed with 2mm

Creche room: 1nos

thick PVC edge-banding Bottom Mounted slide used for Drawer and individual locking

provided. The Table with leveler provision.The product should be as per above given

specification under the guidance of project Engineer in charge.

34 Meeting Table

Dimension: 4500mm(L) X 1200mm(D) X 750mm(H) 1 nos 233128 233128

Dimension: 3750mm(L) X 1200mm(D) X 750mm(H) 1 nos 194273 194273

Dimension: 5400mm(L) X 1500mm(D) X 750mm(H) 1 nos 279752 279752

Digitally signed by AMIT

Supplying, and placing in position of meeting table as per photograph/drawing. Table top

made out of 36mm thk Prelam Particle board table top with 2mm thk pvc edge

banding.Table top supported with 32mm Side panel & 25 mm thk Modesty panel with 2mm

thk PVC edge banding.Providing metal wire raceway & junction connectivity of wires & meeting room

cables also having a provision of 6 Module Flip top cover (3/4 nos).The product should be

as per above given specification under the guidance of project Engineer in charge. Note:

Cut out to be done at site as per requirement

Digitally signed by AMIT

35 Main Chair 4 nos 14266 57064

Supplying, and placing in position of Revolving High back chair. The chair of size 620mm

(W) x 490mm (D) x 1240mm (H) . The chair with adjustable arm rest of which seat shall be

made up of 12mm thk hot pressed two pieces plywood upholstered with fabric in front and

back in ABS moulded with polyurethene foam. Provision of tilt tension adjustment,upright

locking facility and full 360 degree swivel mechanism . The base should be made of crome

finished and fitted with 5 nos twin nylon castor. The pitch centre diameter of the base along Meeting room: 3nos/

with castors should bot exceed 660mm, hydralic height adjustment stoke should be 60- Doctors roon: 1nos

80mm and shall be operated at 30 kg. extension force. The Seat & back are made up of

12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat

has foam of density 32-35 D. The backrest has a foam of 28D. The product should be as per

above given specification under the guidance of project Engineer in charge.

36 Visitor Chair for Meeting room 38 nos 13077 496926

Supplying, and placing in position of Revolving medium back chair . The chair of size

620mm (W) x 490 (D)x 990mm (H). The chair with arm rest of which seat shall be made up

of 12mm thk hot pressed plywood upholstered with fabric in front and back in ABS moulded

with polyurethene foam. Provision of tilt tension adjustment,upright locking facility and full

360 degree swivel mechanism . The base should be made of crome finished and fitted with

Meeting room: 36nos/

5 nos twin nylon castor. The pitch centre diameter of the base along with castors should bot

Doctors roon: 2nos

exceed 660mm, hydralic height adjustment stoke should be 60-80mm and shall be operated

at 30 kg. extension force. The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 D. The

backrest has a foam of 28D .The product should be as per above given specification under

the guidance of project Engineer in charge.

37 Examine Bed

Dimension: 1800mm(L) X 560mm(D) x 810mm(H) 1 nos 33032 33032

Supplying, and placing in position of examine bed as per Image . Frame work are made of

rectangular Stainless Steel with Mounted on protective Stumps.Backrest and Knee rest

movement on ratchet. Bed top is high-density polyurethane foam, and covered with

Washable faux leatherette : waterproof, flame retardant with provision of Detachable Doctors room: 1no

Cushioned sponge mattress of 40mm thickness . Also having a provision of Adjustable Back

and lockable in any lateral position. Maximum Weight Capacity 200 kg.The product should

be as per above given specification under the guidance of project Engineer in charge.

38 Patient Stool for Doctors room

Dimesion: Dia: 450mm(Dia) x 600mm(H) 1 nos 15964 15964

Supplying, and placing in position of patient stool with 4 legs as per Image . Frame are made

out of MS and Top are made out of Stainless Steel finished with Powder Coated. Stainless

steel round top & around ring with Height adjustable & revolving top.The product should be

as per above given specification under the guidance of project Engineer in charge.

Doctors room: 1no

39 Dining Table

Dimension: (L) 3600mm X (D) 1200mmX (H) 750mm Dining table area on 6 th floor 1 nos 105720 105720

Cafetaria area: 6nos /

Dimension: (L) 900mm X (D) 900mmX (H) 750mm 7 nos 25390 177730

Recreation Area: 1no

Digitally signed by AMIT

Supplying, and placing in position of dining table as per image/drawing. Table top made out

of 25mm thk prelaminated particle board with 2mm thk pvc edge banding with ms powder

coated "C" shape legs of size 50mm x 50mm. Comprising of metal powder coated cross

connectors of size 40mm X 40mm . The working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The product

should be as per above given specification under the guidance of project Engineer in

40 Dining Chair 39 nos 3538 137982

Supplying, and placing in position of canteen chair as per image. size: (l)381mm x

(d)419mm x (h)839mm.The seat and back in pvc moulded chair with ss 202 grade frame

round pipe. The chair comes in various colours - green, black, red,yellow, blue, brown,

orange, white. The product should be as per above given specification under the guidance of Cafetaria area: 24nos /

project Engineer in charge. Recreation Area: 4no/

Dining area: 11nos

Main Table Dimension: (L)2800mm X (D)1130mm X (H)770mm

Side Runner Dimension: :(L)1200mm X (D)600mm X (H)770mm

Supplying, and placing in position of table as per photograph. This precise Boss's Desk is

designed with superb qualityFinish made of engineered wood-medium density fibre board &

veneer glossy finish on the same. Functional and stately, with a sturdy design style, this L

shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with

delicate panel moulding and a fantastic size.The modesty frame of the table gives the great

look with panel upholstered wth PVC material which gives the leatherette look.Main Table

top thkness 80mm , side panel/gable end in 70mm thk mdf with venner glossy finish. Main

table and side runner having a skirting @120mm thk with gives a rich look. The office desk

comes with the side runner having enough storage space.The side runner top with a Chairman Cabin

thickness of 80mm thk that gives the great look . Side table, side panel, shelves,drawers

made up of 18mm thk mdf with venner finish. Table having a provision of Pedestal of size:

400(L) X 500(D) X 660(H) having three drawers to store essential & undestructure made out

of 18mm thk mdf with venner finish .Drawers have the stylish handle which enhance the

look. Material & Subtype:Engineered Wood - Medium Density Fibre Board, Colour & Colour

Family:Red - Cherry.side storage unit having a side panel, one drawer , one shutter & one

shelf of 18mm thk mdf with venner finish. The product should be as per above given

specification under the guidance of project Engineer in charge.

42 Back Storage

Dimension:(L) 2000mm X (D)450mm X (H) 2000mm 1 nos 72135 72135

Digitally signed by AMIT

Supplying, and placing in position of back storage as per photograph/drawing. A well-built

bookcase with the looks this is the complete package. A compartmentalized shelving system

with adequate space ensures any book will fit in the shelf. This Bookshelf are made out of

18mm thk prelam particle board with 2mm thk pvc edge banding . The lower cabinets

provisioned with openable shutters with shelf , D shape handles, locking arrangements and

also provisioned with open storage with shelf in it. The upper area to have open shelves for Chairman Cabin

display. The working edges shall be provided with machine pressed 2mm thick PVC edging

using special hot melt glue at hot temperature.The product should be as per above given

specification under the guidance of project Engineer in charge.

43 High back Chair 1 nos 61140 61140

Supplying,and placing in position of 360 degree revloving high back chair as per Image.

This chair is a leader standing tall in this High Back variant with a chrome vaulted base and

sleek chrome armrests. The chair boasts of a padded headrest along with the back,

cushions and armrest panels are upholstered in Burgundy Leather for a premium look and

feel.Leather - Semi Aniline Leather,Colour & Colour Family Red - Burgandy, Dimension

(W)650mm X (D)480mm X (H)1300mm, Maximum Seating Height: 610mm, Minimum Seat

Height: 540mm,FunctionRevolving::Pneumatic Height Lift::Tilt Tension Control::Synchro, Chairman Cabin

Base: Chrome Base, Locking Mechanism: Synchro, Finish Matte. The Seat are made up of

12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat

has foam of density 38-40 kg/m3 .The product should be as per above given specification

under the guidance of project Engineer in charge.

44 Low Back Chair 3 nos 38552 115656

Supplying, and placing in position of 360 degree revloving low back chair as per Image.the

chair is a leader stands proudly in the Low Back variant with a chrome vaulted base and

sleek chrome armrests. The chair back, cushions and armrest panels are upholstered in

Burgundy Leatherette for a premium look and feel.Material & Subtype:Premium Leatherette,

Colour & Colour Family:Red - Burgandy, Dimension (W)650mm X (D)480mm X

(H)1150mm, Back Type:Low Back, Base:Chrome Base, Base Type:Revolving,

Function:Revolving::Pneumatic Height Lift::Tilt Tension Control::Synchro, Locking

Mechanism:Synchro, Finish:Matte, Style:Modern.The pneumatic height adjustment shall

have adjustment stroke of 100mm and shall be operated at 30kgs extension force. The Seat

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane

foam, chair seat has foam of density 38-40 kg/m3.The product should be as per above given

specification under the guidance of project Engineer in charge.

45 Meeting Table

Dimension: 2400mm(L)x 1200mm(D)x 760mm(H) 1 nos 90860 90860

supplying and placing in position of modern design 8-seater conference table as per

photograph. The table top and legs shall be made out of 70- 80mm thick mdf board

including with 0.5mm laminate with glossy finish and, leatherette attached on table top for

extra comfort or looks, laminate mdf with glossy finish. the desk table top carries a

leatherette folio with an inbuilt wire management system for easy access. the under structure

shall be made out of 9-18mm thick 0.5mm laminate with glossy finish mdf board. Table top

made 50 mm thick, tabletop offers you a generous workspace, desk primary work surface

use premium quality materials. Our work surface furniture is finished with natural veneer

shall be finished with same matching natural veneer edge banding tape of same matching

colour in brown - walnut and shade with p.u .polish. all the mdf borad are is-14587-1998

with confirm to din 68861.iso 9001- 2015 quality certification confirming to astm d 4499

standards for viscosity and thermal stability. veneered mdf boards shall be of two grades,

namely, grade 1 and grade 11.The product should be as per above given specification under

the guidance of project Engineer in charge.

46 Medium Back Chair 15 nos 30740 461100

Supplying, and placing in position of 360 degree revloving medium back chair as per Image.

The premium upholstery is an added touch of extra class. With its supple leather upholstery.

Equipped with a multi-locking knee tilt mechanism and adjustable arms this chair is is high

on back support and comfort.t.Dimension (W)640mm X (D)500mm X (H)1130mm, Chairman Cabin meeting chair :

Material:Leather: Semi Aniline Leather, Function: Revolving::Pneumatic Height 6nos/ visitor member cabin:

Lift::Adjustable Armrest::Multilocking Knee Tilt, Maximum Seating Height: 24",Minimum Seat 6nos/

Height: 20.86", Base :Chrome Base, Locking Mechanism: Multi-Locking Knee Tilt. The Seat Secreatary Cabin visitor chair:

& back are made up of 12mm thk hot pressed plywood upholstered with PVC with 3nos

polyurethane foam, chair seat has foam of density 32-25 kg/m3.The backrest has a foam of

28D. The product should be as per above given specification under the guidance of project

Engineer in charge.

47 Lounge Chair

Dimension: (W)768mm X (D)768mm X (H)911mm 2 nos 37873 75746

Digitally signed by AMIT

Supplying and placing in position of lounge chair as per image.The classic charm with its

diamond tufted wingback, carefully accented with nailhead trim and artistically carved legs.

The generous settle-in cushions wrapped in the premium soft fabric invite you to lounge.

Material & SubtypeFabric , Seat MaterialFabric, Colour & Colour Family:Beige - Cream,

Dimension:(W)768mm X (D)768mm X (H)911mm, Seating Height: 460mm,

StyleContemporary, Assembly Type:Pre Assembled.The seat cushion is made of multi Chairman Cabin

layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic

webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest

has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill

keeps the upholstery wrinke free & soft. The product should be as per above given

specification under the guidance of project Engineer in charge.

48 Center Table

Dimension: (L)1080mm X (D)550mm X (H)450mm 2 nos 26494 52988

Supplying and placing in position of centre table as per photograph. The centre table are

made from 10mm thick tempered glass, its artistic shape allows for a spacious tabletop and

easy access storage for magazine. The clear glass finish and the Beech wood legs enhance

your living space with exquisite glamour. Designed from 10mm thick tempered glass with Chairman Cabin: 1no/

Spacious tabletop. Easy access storage with Strong Beech wood leg. The product should be Chairman Ante room: 1nos

as per above given specification under the guidance of project Engineer in charge.

Digitally signed by AMIT

2 seater Dimension(W)1300mm X (D)830mm X (H)805mm 1 nos 77953 77953

1 seater Dimension(W)755mm X (D)830mm X (H)805mm 1 nos 57064 57064

Supplying, and placing in position of sofa as per Image. a sofa tailored by master

upholsterers to be a clean-lined, modern and supremely comfortable retreat. Its timeless

silhouette wrapped in sumptuous top-grain genuine leather features curved arms and a

generously plush backrest that invites you for lounging. Material & Subtype:Leather, Frame

Material:Engineered Wood,Solid Wood, Upholstery Material:Leather, Seat Material:Leather,

Leg Material:Solid Wood, Finish:Matte, Dimension:(W)755mm X (D)830mm X (H)805mm,

Chairman Ante room

Seating Height465mm. The seat cushion is made of multi layered foam of density 32-

35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used

is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with

polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free

& soft.The product should be as per above given specification under the guidance of project

Engineer in charge.

Dimension: (L) 520mm X (D) 400mm X (H) 555mm 3 nos 19191 57573

Supplying & placing in position of side table as per image.Made from 10mm thick tempered

glass, its artistic shape allows for a spacious tabletop and easy-access storage for

magazines and books. The clear glass finish and the Beech wood legs enhance your living

space with exquisite glamour. Designed from 10mm thick tempered glass with Spacious

tabletop. Easy access storage with Strong Beech wood legs.The product should be as per

above given specification under the guidance of project Engineer in charge. Chairman Ante Cabin

51 Recliner Sofa

Dimension: (W)890mm X (D)960mm X (H)990mm 1 nos 73877 73877

Supplying & placing in position of recelinear sofa as per image. Reclinear showcases

charming bun tufting, cushioned arms and plush seating. Wrapped in buttery-soft Nappa

Aire Leather, this recliner invites you to lounge in its enveloping profile. A rocker function

further elevates the comfort story. Material & Subtype:Nappa Aire Leather, Upholstery

Material:Nappa Aire Leather, Seat Material:Nappa Aire Leather, Finish:Matte, Colour &

Colour FamilyBrown - Chocolate Brown, Dimension(W)890mm X (D)960mm X (H)990mm,

Chairman Ante Cabin

Mechanism:Manual, Function:Rocker. The seat cushion is made of multi layered foam of

density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The

thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of

28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the

upholstery wrinke free & soft.The product should be as per above given specification under

the guidance of project Engineer in charge.

Dimension: (W)650mm X (D)455mm X (H)755mm 1 nos 17408 17408

Digitally signed by AMIT

Supplying & placing in position of side table as per image. The staggered table top wrapped

in exotic veneer finished in Dark Oak lends our Mackenzie entertainment unit versatility,

making it a welcome addition to your home. Distinctive wood grains accentuate the inherent

beauty of solid wood. Material & Subtype:Solid Wood - Beech Wood,Veneer - Steam Beech

Chairman Ante Cabin

Veneer,Engineered Wood - MDF, Frame Material:Solid Wood, Leg Material: Solid Wood,

Finish:Matte, Colour & Colour Family:Brown - Dark Oak, Size:Standard, StyleMid-Centu

mdern. The product should be as per above given specification under the guidance of

project Engineer in charge.

53 High back Chair 3 nos 31419 94257

Supplying, and placing in position of 360 degree revloving high back chair as per Image.The

premium upholstery is an added touch of extra class. With its supple leather upholstery.

Equipped with a multi-locking knee tilt mechanism and adjustable arms this chair is is high

on back support and comfort.Size: (W)610mm X (D)500mm X (H)1300mm, Material:

Leather: Semi Aniline Leather, Function: Revolving::Pneumatic Height Lift::Adjustable

Member Cabin: 2nos/

Armrest::Multilocking Knee Tilt, Maximum Seating Height: 24",Minimum Seat Height: 20.86",

Secretary Cabin: 1no

Base :Chrome Base, Locking Mechanism: Multi-Locking Knee Tilt. The Seat & back are

made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-25 kg/m3.The backrest has a foam of 28D. The product

should be as per above given specification under the guidance of project Engineer in

Main Table Dimension: 1500mm(L) X 600mm(D) X 750mm(H)

Overall Side Unit Dimension: 1500mm(L) X 450mm(D) x 750mm(H)

Supplying, and placing in position of main Table as per drawing/image. The Table top are

made out of 25mm thk prelam particle board with 2mm thk pvc edge banding & side panel

& modesty panel are made up of 18mm thick pre-laminated particle board .The working

edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt

glue at hot temperature. The table have a provision of Side Storage of size 900mm L x

450mm D x 750mm Ht., Storage Top are made out of 25mm thick pre laminated particle

board and rest all storage to be made out of 18 mm thick prelaminated particle board . All

PS to Member Cabin: 2nos

exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with

hot melt EVA glue. Side Storage having a provision of 3 drawer unit of size: 400mm(L) x

450mm(D) x 675mm(H) attached to the side storage top with the help of shiny metal rods.

Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit

shall be made of 18 mm thick prelaminated Particle board with provision of central Locking

arrangement.The product should be as per above given specification under the guidance of

project Engineer in charge.

55 Back Storage

Dimension: 1500mm(L) X 450mm(D) x 750mm(H) 2 nos 20700 41400

Supplying, and placing in position of medium height storage @ 750mm height as per

photograph/drawing . The storage unit having Openable shutters with shelf in it. The

modular storage unit top shall be made from 18 mm thick pre-laminated particle board and

rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated

particle board while back to be made of 8 mm thick pre-laminated particle board. All edges PS to Member Cabin: 2nos

to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters with

D shape handles & locking arrangement. The product should be as per above given

specification under the guidance of project Engineer in charge.

Digitally signed by AMIT

56 Main Chair 2 nos 26409 52818

Supplying, and placing in position of 360 degree revolving High back chair as per Image.

This contemporary chair comprises of luxurious double padding cushion with a central indent