Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹32.4 L+₹3.4 L (11.5%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical Documents are not in order. |
Tender Value
₹42.7 L
EMD Value
₹85,400
Closing Date
16 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) FARIDABAD
GE (AF) FARIDABAD
ADDN/ALTN TO CERTAIN SMQ AT AF STN FARIDABAD UNDER GE (AF) FARIDABAD
2022_MES_525192_1
GE(FBD)/AF-12/2022-23
Open Tender
Civil Works - Others
Works
180 days
FARIDABAD
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE (AF) FARIDABAD
₹85,400
Yes
17 Sept 2022
20 May 2022
18 Jun 2022
20 May 2022
16 Jun 2022
3 Jun 2022
21 May 2022 - 28 May 2022
60 days
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Demolition of stone slabs and tiles of any description or thickness in floors, apron etc complete all as specified amd directed by Engineer-in-Charge.
Demolition of cement concrete (un-reinforced) in ground floor and in paving not exceeding 15 cm thickness ( below or above ground level) complete all as specified and directed by Engineer-in-Charge.
S&F Vitrified ceramic tiles 10 mm thick of light shade (Square/rectangular) polished area of each tile not exceeding 0. 36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
All as per item No 04 but light shade as in skirting on vartical surface over 10 mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified and directed by Engineer-in-Charge.
M&L for Glazed ceramic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and directed by Engineer-in-Charge.
M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment ot match with shade of granite including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L for 75mm thick cement concrete type C-2 1:3:6 using 40mm graded aggregate as in plinth protection, varamdah or path including necessary formwork & dummy joints complete all as specified and as directed by the Engineer-in-Charge
Taking down chowkat or frames not exc 1.50 sq.m each (with shutter without taking off shutter from the frame) etc complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat or frame with shutter (without taking of shutter from frame) exc 1.5 sqm but not exe 4.00 Sq m each each complete all as specified and directed by Engineer-in-Charge.
Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer's instructions and shown on drawing on Page 160 of SSR Pt-II ,complete all as specified and directed by the Engineer in Charge.
Factory made solid panel PVC Door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side as gap insert for top rails, bottom rail,panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supply & fixing in the frame at site as per specification and drawing on Page No 156 of SSR Part-II Rates,complete all as specified and directed by the Engineer in Charge.
S&F, Mild steel framed work such as angles, grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; door frame, ladders and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
S&F, 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.
S & F, 5 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed by Engineer-in-Charge.
S&F 35mm thick glazed and skelton shutter of 1st class hardwood open rebated and prepared to receive glass, gauze divided into square with plain ,chamfered or rounded, mitred and rebated sash bars, any number, edges of framing plain or rounded , fitted with cut and mitred beads for securing glasses etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.20(a) supplied and fixed to chowkhat complete all as specified and directed by Engineer in Charge
S& F in repair 150mm ordinary helical door springs including roller and rollar plate, fixed including welding/ fixing to steel/ wooden chowkats, complete all as specified and directed by Engineer-in-charge.
S&F pressed steel frame for doors with one or more rebated including necessary fixing lungs, hinges, lock, strike plates etc and size of frame 125 x60 mm complete all as specified and directed by Engineer-in-Charge.
S&F pressed steel frame for doors with one or more rebated including necessary fixing lungs, hinges, lock, strike plates etc complete all as specified and size of frame 165 x60 mm complete all as specified and directed by Engineer-in-Charge. NOTE : this frame is for fixing of double doors
S&F , powder coated Anodised aluminium frame for doors, windows ( min thickness 50 microns) with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge.
S&F, Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete complete all as specified and directed by Engineer-in-Charge.
M&L for factory made box type steel windows, 16 gauge steel section for frames & shutters, as per TD drawing No.219, sheet 01/03 to 03/03, type using ERW hollow 'P' section comprising double frame for glazed and gauged skelton shutters jointed internally with flat iron 40X4 mm complete including grill of 8 mm square bar, fixed horizontally @ 10 cm centre to centre, pintel hinges 75 mm long 12 mm dia, 100 mm long handle, 150 mm long tower bolts, lugs etc. with/ without cooler provision, complete all as specified and directed by Engineer-in-Charge. Note :- (i) For purpose of measurement and payment double shutter with frame including grill shall be considered as one unit. (ii) Glazing and wire mesh shall be measured and paid for separately in respective of item. NOTE : Item includes cost of double shutter of gauged and glazed shutter with square bar grill.
S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) complete all as specified and directed by Engineer-in-Charge.
S&F 150 mm long, extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engineer-in-Charge.
S&F 100 mm cold rolled stainless steel butt hinges medium weight complete all as specified and directed by Engineer-in-Charge.
S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.
S&F sheet glass ordinary quality 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.
M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice laminations, fixed with screws, fixed in repair for cupboard shutter, shelve, partiion & kitchen cabinet complete all as specified and directed by Engineer-in-Charge.
Demolition brick work or stone/boulder masonary,built in cement mortar or cement lime mortar including all quions, arches pillars,etc but ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
M&L for brickwork using old size bricks Sub class B straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces with WPC @ of 3% of weight of cement complete all as specified and as directed by the Engineer-in-Charge.
M & L for rendering 15mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement or cement complete all as specified and as directed by the Engineer-in-Charge
M&L, Rendering 5 mm thick on fair faces of brick or concrete surfaces with in CM 1:3 on ceilling finished even and smooth all as specified & as directed by Engineer-in-Charge
Supply only Integral waterproofing compound complete all as specified and directed by Engineer-in-Charge.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.
M & L for preparing new surfaces of walls, distempering 2 coats with oil emulsion distemper white or tinted over one coat of wall care putty complete all as specified and as directed by the Engineer-in-Charge
All as per item No 39 above but on ceiling surfaces complete all as specified and directed by Engineer-in-Charge.
Complete removal of existing treatment including preparation of surfaces and applying two coats of weather proof emulsion of electric blue or white colour over a coat of exterior wall primer in (projections of column/wall/edges of chajja, roofs and other narrow locations in buildings upto ground plus three floor) complete all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treatment on walls including preparing old plaster surfaces and applying two coats of cement based paint complete all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treatment on walls including preparing old plastered surfaces and applying two coats of oil bound distemper complete all as specified and directed by Engineer-in-Charge.
All as per item No 43 above but on ceiling surfaces complete all as specified and directed by Engineer-in-Charge.
M&L for two coat of Synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description not other wise described over 10 cm width or girth including preparation complete all as specified and directed by Engineer-in-Charge.
M&L for prepartion on new surface of steel & iron work of any description not specifically mentioned otherwise over 10 cm width or girth & applying two coat of synthetic enamal paint over one coat of red oxide primer all as specified & as directed
M&L PCC type B1, 1:2:4, using 20mm graded aggregate as in stagging for water tanks, inserting hold fast and filling Jamb etc and like including weathering slighly rounded or chamfered and where connecting slab and parapets etc angles throating complete all as specified and directed by Engineer-in-Charge.
Dismantling existing water storage tanks exc 250 litres but n.exc 500 litres capacity by disconnecting existing water connection and removal from site complete all as specified and directed by Engineer-in-Charge
S&F, Rotational moulded PVC, double layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve complete all as specified and directed by Engineer-in-Charge.
S&F Ball valve, high pressure with of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms) complete all as specified and directed by Engineer-in-Charge.
S&F in repair Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Taking down carefully existing bitumen tar felt including plaster, concrete/brick coba /tiling from the roof /parapets till RCC slab and roughening the surface ,wire brushing , cleaning and washing with water etc. and removing the rubbish to a distance exceeding 500m but n.exc 1Km & depositing where complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces with WPC @ of 3% of weight of cement, on roof surface at double storey building, complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for roof treatment on RCC roof slab complete as mentioned below, complete all as specified and directed by Engineer-in-Charge. (i) Cleaning the concrete surfaces of RCC roof slab as obtained after demolition/taking down of existing water proofing treatment thoroughly with wire brushes, washed and dried. (ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/dampness all specified in SSR Part-I (iii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (vi) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 kg/sqm on top of dry surface. (v) Laying APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame "torch', application method all as per manufacturer's instructions.
S & F Fancy type mild steel 25 mm dia Drapery rod with all fittings including making the disturbed good as per existing specification,as in repair with fancy type brackets and knobs for curtain rods, to fix on wall complete all as specified and directed by Engineer-in-Charge. Note : Item includes the cost of fancy type brackets and knobs.
Taking up or down steel tubing with connections for cleaning for refixing complete of bore 15mm, all as specified .
Taking up or down steel tubing with connections for cleaning for refixing complete of bore 20mm, complete all as specified and directed by Engineer-in-Charge.
S&F 15 mm bore ,CPVC medium grade , with all fittings (like Elbow , Tee, Socket, Gi pipe connecter, nipples, tank adaptor etc) and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed by Engineer-in-Charge.
S&F 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings complete all as specified and directed by Engineer-in-Charge.
S&F in repair Bib taps, long body, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed in repair, complete all as specified and directed by Engineer-in-Charge.
S&F in repair Brass chromium plated shower rose 125mm with CP Arm with swivel joints incl fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.
S&F in repair Stop valves fancy type, chromium plated for iron pipe or for unions of bore dia 15mm and fixed, complete all as specified and directed by Engineer-in-Charge.
M&L, Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rest (exclusive flusing cistern& flush pipe) including cast iron 'P' or 'S' trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2 and necessary lime concrete, fixed as in repairs, including making good the surface to match with existing floor finish fixed as in repair complete all as specified and directed by Engineer-in-Charge.
S&F, Wash basin, vitreous china, white, flat back of size 550x400 mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32 mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32 mm dia HDPE waste pipe and including new brackets fixed as in repair complete all as specified and directed by Engineer-in-Charge.
S&F, Stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm fixed as in repair and making good to disturbed surfaces, complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed by Engineer-in-Charge.
S&F in repair Angle cock, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions bore dia of 15mm complete all as specified and directed by Engineer-in-Charge.
S&F 15mm dia pillar taps, cast cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure, with or with out lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repair CP Soap dish, fancy type, fixed to plugs with chromium plated brass screws all as specified.
Supply & fix in repairs , stainless steel Plate Rack of best quality, made out of 0.80 mm thick stainless steel sheet , of size 90 cm x 60 cm x 25 cm with all internal fittings of appoved make complete all as specified and directed by Engineer-in-Charge.
S&F, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia of required length for orissa pattern w/c sheet, fixed in repair complete all as specified and directed by Engineer-in-Charge.
S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed by Engineer-in-Charge.
Taking down rainwater pipes/PVC pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and directed by Engineer-in-Charge. (measured overall as fixed along the centre line over fittings and accessories)
S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clamps complete all as specified and directed by Engineer-in-Charge.
S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified and directed by Engineer-in-Charge.
S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified and directed by Engineer-in-Charge.
S&F PVC (SWR) junction single, (Single T) equal or unequal of 110mm dia with access door complete all as specified and directed by Engineer-in-Charge.
S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified and directed by Engineer-in-Charge.
S&F PVC(SWR) bends suitable for 75 mm external dia with acces door complete all as specified and directed by Engineer-in-Charge.
S&F PVC (SWR) vent cowl of 75mm bore dia complete all as specified and directed by Engineer-in-Charge.
M&L in repair 110mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose and soft soil complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L fibrillated fiber reinforced heavy duty coloured cement concrete pre polished chequred tiles from Ultra floor tiles or equivalent size 300 x 300 x 20 to 25 mm and wt 4.2kg/tile set jointed and pointed in neat cement slurry in floors, and cut and polished with white cement & pigment, over 15mm thick screed bed or bedding layer of cement mortar 1:4, for laying floor finish complete all as specified and directed by Engineer-in-Charge.
Removing building material etc, (other than spoil payable under items 03028 to 03031 in Section 3-Eathwork) to a distance of 2.5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination (for per load refer SSR 2010 section 21 page 462) complete all as specified and directed by Engineer-in-Charge.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Taking Down carefully Copper/aluminium Point Wiring (light, fan,socket or Power) complete,(fittings Such as switches, ceiling roses, pendents, regulators sockets etc, to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer-in-Charge.
Taking down carefully aluminum two core sub main wiring of sizes 6 Sqmm /4 Sqmm cable any type and removing old material from site and making good disurbed surface complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.
Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.
Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1 with peak, size 250 mm x 150mm x 40mm complete all as specified and directed by Engineer-in-Charge.
Supply, lay, spread in trenches river sand including spreading, levelling, punning for cushioning of cable complete all as specified and directed by Engineer-in-Charge.
Supply and laying in trenches, LT underground cable of size 4 core 25 Sqmm XLPE insulated armoured and PVC sheathed 1100 Volts grade with aluminium conductor multistranded including cable connecting lugs, glands,jointing materials etc.laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as specified and directed by Engineer-in-Charge.
S&L GI tubing light grade 40 mm bore intrenches/fixing on pole/wall/crossing in drain etc. for protection of UG cable complete all as specified and directed by Engineer-in-Charge.
M&L point wiring with 1.5 Sqmm (Nominal area) PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper concuctor in and including PVC concealed conduit and conduit accessories along with continuous earth wire 1.5 Sqmm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including complete with all accessories for one light point/Fan point/bell point controlled by one ,one way switch complete all as specified and directed by Engineer-in-Charge.
All as per Item No.99 mentioned here-in- before but on the same board with other switches with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and directed by Engineer-in-Charge.
All as per item No.99 mentioned here-in- before but one three pin 5 Amps socket out let on independant board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and directed by Engineer-in-Charge.
All as per item No.99 mentioned here-in- before but 15 Amps 3 pin socket outlet on independent board with 2.5 sq mm PVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single core for continuous earthing complete all as specified and directed by Engineer-in-Charge.
All as per item 99 mentioned here-in- before but for Single pole and neutral enclosure with 4.0 sq mm PVC insulated and sheathed copper conductor with 4.00 sq mm PVC insulated copper conductor single core for continuous earthing complete.
All as per item No.99 above but one light point controlled by two 2 way 5 Amps switch complete all as specified and directed by Engineer-in-Charge.
S&F Piano switch in repairs, flush button single pole one way 6 Amp complete all as specified and directed by Engineer-in-Charge.
Supply and fix switch flush type 5 Amps single pole two way complete all as specified and directed by Engineer-in-Charge.
S&F bell push, in repairs, flush type 5 Amps complete all as specified and directed by Engineer-in-Charge.
S&F socket outlet, in repairs, flush type 2 in 1, 3 pin 6 Amp complete all as specified and directed by Engineer-in-Charge.
S&F socket outlet, in repairs, flush type 2 in 1, 3 pin and 6/16 Amp complete all as specified and directed by Engineer-in-Charge.
S&F Piano switch in repairs, flush button single pole one way 16 Amp complete all as specified and directed by Engineer-in-Charge.
S&F stepped type electronic fan regulator, in repairs, flush type on the existing phenolic laminated sheet etc. complete all as specified and directed by Engineer-in-Charge.
S & F Sheet metal Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 V complete all as specified and directed by Engineer-in-Charge.
Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 12 way Double door with 200 Amps rated busbar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface complete all as specified and directed by Engineer-in-Charge.
S&F in repairs,MCB SP 6-32 Amps,"C" series 240 Volts complete all as specified and directed by Engineer-in-Charge.
S & F in repairs,MCB SPN 32 Amps,"C" series 240 Volts complete all as specified and directed by Engineer-in-Charge.
S&F in repairs,ceiling rose surface backlight, 65 x 50 mm three terminals complete all as specified and directed by Engineer-in-Charge.
M&L in repairs,two single core PVC insulated cable with copper conductor multi stranded 6 Sqmm in and incl. duly drawn through and including concealed PVC conduit suitable size as sub main with continuous earth wire 6 Sqmm size and connecting to common earth dolly all complete all as specified and directed by Engineer-in-Charge. (Flexible Copper Wire Used In FRLS)
All as per item No 117 mentioned here-in- before but 4.0 sq mm PVC insulated and sheathed copper conductor with 4 sq mm PVC insulated copper conductor single core for continuous earthing complete all as specified and directed by Engineer-in-Charge.
S&F lamp batten holder, in repairs, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in-Charge.
S & F in repairs Bell Multi Music type, 240 Volts complete all as specified and directed by Engineer-in-Charge.
Supply and fixing LED , Tube light fitting 20 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge. Make - Polycab Cat Part No. INTENSO AX LED BATTEN 4 FEET 20 W or Equivalent in Philips/Ledvance/ Havells/Bajaj.
Supply and fixing LED , Tube light fitting 12 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting all as specified and directed. Make - Polycab Cat Part No. INTENSO AX LED BATTEN 2 FEET 12 W or Equivalent in Philips/Ledvance/ Havells/Bajaj.
S&F in repair energy efficient LED building secruity lights 1x30W with lens, PDC aluminium body and toughened glass visor fitted in frame secondary optical lens for superior light distribution efficay >100 Lm/W, CCT 5700K, IP-65 complete with bracket/clamps, nut bolts and washers suitable for fitted in building complete all as specified and directed by Engineer-in-Charge. Make - Polycab Cat Part No. PCGLS T1 30 N or Equivalent in Philips/Ledvance/ Havells/Bajaj.
S&F Fresh Air fan 250 mm sweep, 240 Volt AC single phase completed complete all as specified and directed by Engineer-in-Charge. Make - Standard Refresh air-DX or equivalent to Havells/USHA/Crompton.
S&F exhaust fan heavy duty metal body with louvers of size 300mm sweep, 1400 RPM including making holes in existing bricks/stone wall and fixing arrangements complete all as specified and directed by Engineer-in-Charge. Make - Standard Refresh air-HD
M & L in repairs earthing complete with galvanised steel earth plate electode 600 x 600 x 6.0 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level connected to & including galvanised steel wire 4.0 mm dia size means of nuts and bolt check nuts and washers of galvanised rion sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to earthing test point complete including testing filling of adquate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed by Engineer-in-Charge.
Taking down existing geysers and refixing the same after completion of work including 04 Nos anchor bolts and nuts of each gesyer complete all as specified and directed by Engineer-in-Charge.
Parveen Builders
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .