Construction of LSQ Accommodation at Police Post Chowki Chora Jammu ( contract No. 19)

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: (including lead, lift and carrige all complete)

All kinds of soil :

Ordinary Rock

Hard Rock (Blasting prohibited )

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :

All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (Including lead, lift and carriage all complete)

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) (Including lead, lift and carriage all complete)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level (Including lead, lift and carriage all complete)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level (Including lead, lift and carriage all complete)

1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with (Including lead, lift and carriage all complete)

1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Cast in situ Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (Including lead, lift and carriage all complete)

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (Including lead, lift and carriage all complete)

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centring and shuttering including strutting, propping etc and removal of form work:-

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level (Including lead, lift and carriage all complete)

Thermo-Mechanically Treated bars of grade Fe-500D or more

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Dry random rubble masonry with hard stone in foundation and plinth:

With bond stone

Brick with FPS bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) (Including lead, lift and carriage all complete)

Extra for brick work in super structure above plinth up to floor V level.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):

Sal Wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. (35 mm 2nd ClaSS deodar Wood)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinf!eS bright finished of required size with necessary 35 30 screws..35mm 2nd Class deodar Wood

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws(35 mm 2nd Class Deodar Wood)

15mm cement plaster on rough side of single or half brick wall in1:6(1 cement : 6 fine sand mortar) (Including lead, lift and carriage all complete)

6 mm thick cement plaster of 1:3 mix (1 cement : 3 fine sand mortar) (Including lead, lift and carriage all complete)

12 mm Cement plaster in two coats under layer 12mm thick cement plaster 1 : 4 (1 cement : 4 coarse sand) finished with a top layer 6mm thick cement plaster 1 : 4 (1 cement : 4 fine sand) (Including lead, lift and carriage all complete)

12mm Cement plaster finished with a floating coat of neat cement of mix of 1:4 (Including lead, lift and carriage all complete)

Providing and applying cement based putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. (Interior Finishing)

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm)

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard or soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. (Including lead, lift and carriage all complete)

50 mm thick with 20mm nominal size stone aggregate.

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (including lead, lift and carriage all complete)

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (Including lead, lift and carriage all complete)

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(Grill works)

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured. (Including lead, lift and carriage all complete)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete sqm (Including lead, lift and carriage all complete)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (Including lead, lift and carriage all complete)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. (Including lead, lift and carriage all complete)

Size of tile 600x600 mm

Providing / fixing of plyboard 19mm kitchen / counter cabnets of 2'-0" deep including laminated with dulmica 1mm sheets of shutters on one face including steel hinge, satinless steel handles 75m locking system, varnishing of interior unlaminated surface with approved quality of varnish complete job

Providing and fixing of Hardware fittings (Alloy) as per approved samples

100mm Handle

150 mm Handle

100mm Tower bolt

150mm Tower bolts

Stay hooks

L-drops 16" With Lock Link or equalinet

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the

25mm OD(SDR-7.4)

32mm OD(SDR-7.4)

Walls

Ground

External work including trenching, refilling etc. Main supply line.

40mm OD (SDR-7.4)

a) PPR Union 25mm

b) PPR Union 32mm

c) PPR Union 40mm

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

40 mm nominal bore

Providing and fixing ball valve (brass) of approved quality complete

a) 15mm dia

b) 20mm dia

c) 25mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.25mm nominal bore, 152mm long, weighing not less than 440gms.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

P/F CP long brass single lever wall mixer of approved qaulity and make as approved by engineeh-in-charge 15mm dia

P/F CP brass Double lever wall mixer with consealed shower of approved qaulity and make as approved by engineeh-in-charge 15mm dia

Providing and fixing white vitreous china water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever)conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied:W.C. pan with lSI marked white solid plastic seat and lid.

Providng and fixing white vitreous china wash Basin with C.I brackets, single hole basin mixer, 32mm CP brass waste of standard pattern , incl. painting of fittings and brackets, cutting and making good the walls where ever required. Wash basin 550x400mm with a pair of a5mm CP brass taps

P/F CP Brass Trap

P/F white vitrous china pedastal for wash basin complete ressed at back for the reception of pipe and fittings

Kitchen Sink 600x510x200mm , Incl all fitting CP waste. PVC waste pipe . making PVC connections.

P/F PVC waste 32mm

P/F 8mm dia C.P/S.S jet with flexible tube up to 1mter long with S.S triangular plate to eurepean type W.C of approved qaulity and make.

P/F 600x450mm beveled edge mirrior of superior glass of approved quality complete with 6mm thick hard board ground glass to wooden cleats with C.P brass screws and wasers complete.

P/F 1500x4500mm beveled edge mirrior of superior glass of approved quality complete with 6mm thick hard board ground glass to wooden cleats with C.P brass screws and wasers complete.

P/F 600x120x5mm glass shelf with edges off. Supported on anodised angle frame with CP brass brackets and guard rail complete fixed with 40mm screws, rawl plugs etc.

P/F toilet paper holder (CP)

P/F in position PVC P or S traps

P/F in position PVC floor traps

a) 100mm dia

P/F soil, waste and vent pipes 1mm thick

a)PVC S&S pipe (100mm dia)

b)PVC S&S pipe (75mm dia)

c)PVC S&S pipe (50mm dia)

PVC Cowel 50mm dia

P/F PVC stay and clamps for PVC pipes

P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes

P/F plain bends

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 (Including lead, lift and carriage all complete)

P/F Tee-junction of required degree with access door, inserted rubber washer 3mm thick, bolts and nuts complete.100x100x100 PVC 1mm

P/F PVC Reducer 100-50mm dia

P/F PVC coller 100 & 75mm

Providing and fixing liquid PTMT soap container 109mm wide 125mm high and of approved quality weighing not less than 105 grms

P/F PTMT towel rails with brackets fixed to wooden cleats with CP brass with concealed fittings arrangemet of approved quality (600mm long total length 645mm ,78mm wide and effective hight 88mm weighing not less than 190gms

P/F CP gratting100mm dia

P/F PVC connections 15mm

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominalsize),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stoneaggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 20.24.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line- (Including lead, lift and carriage all complete)

P/F master trap

NARESH GUPTA CONTRACTOR

AVG Contracts and Supplies pvt ltd

M/S JAI PAUL

Karan Singh

M/S MOHAN LAL GUPTA