REPAIR AND MAINTENANCE WORK AT GUEST HOUSE BUILDING AND RESIDENTIAL QUATERS UNDER MAHANADI DIVISION CWC BURLA

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing bath shower of standard brand like Gaguar or equivalent

Providing Jaguar make or approved equivalent CP brass health faucet with tube complete set as per instruction ot Engineer-in-Charge.

Providing and fixing on wall face unplasticised-PVC moulded fitting / accessoried for unplasticised rigid PVC Rain water pipe conforming to IS: 13592 Type A including jointing with swal ring conforming of IS: 5382 leaving 10mm gap for themal expansion.

Cleaning of septic tank and diposal of waste material of division office and residential complex as and when required as per instruction of Engineer-in-Charge.