NIT NO.4(M6)ITEM NO. 7

providing of 150mm dia blank flang

S/o Nut bolts with washers of good quality.

S/O of 40 mm Dia M.S. pipe Make: - Jindal/Tata / Approved make by DJB

Supply of 50% neoprene rubber packing of suitable size as per site requirement. Make: Jyoti/ Worth

Dismantling of charging pump and repairing of charging pump set and making it leak proof with the fixing asbestose graphite packing, and change its studs.etc. As per site requirement

Dismantling of old damage line and fixing of New pipes for replacement of charging line, making of required size pipes and specials by manual labour, taking all safety measures with proper welding, alignment, tightening the nut bolts, making of joint leak proof.

installation of charging pump set by providing & fixing of nipples, elbows, tees, bends etc. by taking all safety precautions, arranging all tools and tackles i/c welding set gas cutter etc. as per site requirement.

Dismantling of old motor of Set No.1 from pump and base frame with the help of manual labour, or with gas cutter from base frametaking all safety measure .

Modification of existing base frame suitable for pump set with the help of welding work & material as required s required.

Strengthening of RCC foundation for suitable upto 40HP motor and charging pump and motor plastering and making wet layer of cement for the foundation i/c. Shuttering etc. as required and filling the gap of RCC foundation as per site requirement to increase the strength of foundation by cement concrete work with the manual labour as per satisfaction of engineer-in-charge.

installation/ replacement of motor 40 HP Motor set No.1 (motor will be provided by the department) along with other E&M equipment work , like laying of cable as per site requirement, making connection with thimble panel board by taking all safety precautions, arranging all tools and tackles i/c welding set gas cutter etc. as per site requirement.

Testing & commissioning of motor P/set i/c above all E&M equipment first at on No-load and then on full-load condition.

Transportation charges for man & Material including loading/ Unloading etc. as per site requirement at a suitable place as per direction of engineer-in-charge.

Supply of Red oxide Zinc chromate primerDSR (2202) 2018

Supply of Turpentine oil DSR (7770) 2018

Supply of synthetic enamel paint orange DSR (0834) 2018

Supply of synthetic enamel paint yellow DSR (0834) 2018

Supply of Synthetic enamel paint in White Colour DSR (0834) 2018

Supply of Synthetic enamel paint in Blue Colour DSR (0834) 2018

Supply of Anticorrosive bituminous paint black DSR (0833) 2018

Supply of Synthetic enamel paint in Dark Gray Colour DSR (0834) 2018

Supply of Thinner DSR (8517) 2018

Chemical Rust Remover DSR (7911) 2018

Wire Brush DSR (364) 2018

Hiring charge of Painter DSR (0131) 2018

Hiring charge of Beldar DSR (0114) 2018

Hiring Charge of Paint applicator DSR (0033) 2018

HYDROCON ENGINEERS