Vertical Extension of Chief Engineer Office Building Irrigation and Water Resources Dept. under NHP at Mizoram New Capital Complex, Aizawl.

Amount

Civil Works

Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-20 grade reinforced cement concrete excluding cost of centering and shuttering and reinforcement in - b) All work above plinth level upto floor V level.

Centering and shuttering including strutting, propping, etc. and removal of form works in - c) Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping, etc. and removal of form works in -d) Lintels, beams, plinth beams, girders, bressumers and cantilevers, etc.

Centering and shuttering including strutting, propping, etc. and removal of form works in - e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.

Centering and shuttering including strutting, propping, etc. and removal of form works in - f) Staircases (except spiral staircase) excluding landings.

Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1cement : 3fine sand)

Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. (f) Thermo-Mechanically Treated bars.

Half brick masonry with first class brick in foundation and plinth in: b) in cement mortar 1:4 ( 1cement :4 fine sand)

First class brickwork in superstructure above plinth level upto floor V level in:

20mm cement plaster 1 : 4 (1 cement : 4 fine sand).

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Applying double coated PIDIFIN-2K on the surface of cement concrete for prevention of water infiltration and dampness in water tanks, basement, terraces, etc. ) @1.85kg per sqm.

Providing Ist class local wood dressed in frames of chaukat for doors, windows, clerestory windows fixed in position.

Providing and fixing 40mm thick panelled door shutter comprising of styles and rails of seasoned teak wood with panels of Duratuff board 25mm thick as per required architectural design including M.S. butt hinges with necessary screws but excluding varnishing/painting etc.

Providing 1st class local wood work dressed in frames of sill, upright, batten, post, beams, etc. as structural members fixed in position complete.

25mm thick dressed local wood planked flooring butt joined fixed with iron screws / nails complete excluding cost of base frame.

Providing and fixing anodised aluminium work for windows and ventilators with extruded built up standard sections of approved make conforming to IS : 733 and IS : 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whenever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses. (a) 2 - track sliding windows/ventilators.

Supplying of glass panes at site. (d) 5mm thick plate sheet glass.

Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622,of approved make, in all colours and shades, laid on bed of 20mm thick cement mortar 1 : 4 (1cement:4course sand), includingthe joints with white cement and matching pigments etc.complete.as per design colours. (d) Digital (Marble look)

Providi ng & laying vitrified tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622,of approved make, in all colours and shades, in skirting , riser of steps, laid with cement based high polymer modified quick set tile adhesive (water) based) conforming to IS:15477, in average 6mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). (d) Digital (Marble look)

Marble stone flooring 18mm thick marble stone as per sample of marble approved by Engineer-in-Charge, over 20 mm thick base of cement mortar 1:4 (1cement :4 coarse sand) laid and jointed with white cement slurry including rubbing and polishing complete. (a) Raj Nagar Plain white marble/green white marble

Providing and ceramic glazed floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours,shades, except white,ivory,grey,fume red brown, laid on 20mm thick cement mortar 1 : 4 (1cement : 4 course sand ) including pointing the joints with white cement and matching pigments etc. complete. as per designed colour. (b) Matt/ Anti-scratch

Providing and ceramic glazed floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours,shades, except white,ivory,grey,fume red brown, laid on 20mm thick cement mortar 1 : 4 (1cement : 4 course sand ) including pointing the joints with white cement and matching pigments etc. complete. as per designed colour. (a) Gloss finish

Providing & laying border tiles of approved quality, size, shape and thickness not less than 8mm of approved brand of any shade in wall & floors laid on bed of 20mm thick cement mortar 1 : 4 jointed with neat cement slurry including finishing joints with grouting in white cement mixed with pigment of matching shade complete.or/ including cutting where necessary finishing with flush pointing with Fix-A-tile (Choksey/ Sika/ Pedelite/ Rout)/ Bal Endura with Bal endura grout complete. (a) Fixed with white cement

Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 well graded stone aggregate 20mm size) finished with a floating coat neat cement including cement slurry etc. complete but excluding the cost of nosing of steps etc.

Applying double coated PIDIFIN-2K on the surface of cement concrete for prevention of water infiltration and dampness in water tanks, basement, terraces, etc. ) @1.85kg per sqm.

Supplying and fixing M.S. decorative railing consisting of top and bottom rails of 40mmx40mm square or circular section at distance of 788mm apart, 30mmx30mm square or circular section decorative intermediate balusters welded to top and bottom rails at 280mm apart. The base of balusters at 560mm apart welded with base plate of 60mmx3mm thick and fixed with cement grouting firmly to concrete section including steel priming ans steel painting complete etc.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of 80cm high in staircase, etc consisting of 75mm for rail and post, 63mm for longitudinal intermediate rail and 25mm of vertical section, spacing 125mm interval and as per approval of Engineer-in-charge.

Providing and fixing aluminium frame works for ceiling lining consisting of battens 50x25mm fixed over plugs embedded in wall with necessary nails or screws, etc. complete.

Supplying, fitting and fixing calcium silicate board ceiling with nescessary screws etc. complete excluding frame work of base and beading. (Hilux or equivalent)

Providing and fixing dressed & chamfered 1st class local wood door and window architrave of size fixed with wooden plug on door chaukhat etc complete. (a) 100mmx30mm

Providing and fixing CP brass sliding door bolts (aldrops) bright finished with nuts and screws etc. complete. (a) 300x16mm

Providing and fixing CP brass tower bolts (socket bolts) bright finished with necessary screws etc. complete. a) 250 mm

Providing and fixing CP brass handles with necessary screws, etc. complete. (a) 250 mm

Providing and fixing CP brass handles with necessary screws, etc. complete. (C) 150 mm

Providing and fixing 150 mm bright finished brass floor door stopper with rubber cuhion, screws, etc. to suite shutter thickness complete.

Providing and fixing wooden pelmet with 25mm dia wooden curtain rod and bracket including wooden plugs etc. complete (to be fixed on masonry or concrete work). (A) 1st class teak wood (b) 12mm thick 150 cm wide Pelmet.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of cement primer of approved brand and manufacture on wall surface.

Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade. (a) Regular interior emulsion like rangoli delux emulsion etc.

Finishing walls with exterior emulsion of required shade on new work (three or more coats) to give an even shade. a) Reqular exterior emulsion like supercote, walmasala etc.

Applying priming coat with ready mixed primer of approved brand and manufacture on wood work and plywood complete. (a) Ready mix white primer

Painting with synthetic enamel paint of approved brand and manufacture in all shades on new work (two or more coats).

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layer not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

SANITARY INSTALLATION

Providing and fixing water closet squatting pan ( Indian type ) with 100mm SCI 'P"/'S' trap,10 lits low level white PVC flushing cistern including flush pipe,manually controlled device with all fitting and fixtures complete including cutting and making good the walls and floors wherever required.( b) White Vitreous china Orissa pattern W.C. pan of size 530x410 mm with integral type foot rests

Providing and fixing vitreous china water closet (EWC Extd.Wall Mtg. Constellation) including Seat Cover Constellation premium and lid with C.P brass hinges and rubber buffers, Dual-flush Cistern with Lid Constellation and Fittings (Water Saver dualflush) and C.I / R.S brackets, 40 mm porcelain enamelled flush bend, overflow arrangement withspecials of standard make and mosquito proof coupling of approved design complete including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required. (B) (ii) Pastel

Providing and fixing vitreous china Urinal Flat Back Large 59 x 37.5 x 39cm of Parryware/ Hindware/ Cera and equivalent make with flush valve/spray with C.I or R.S brackets standard size of G.I flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (i) White

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. (a) White Vitreous China Wash basin size 630x450mm with a single 15mm C.P. brass pillar tap.

Providing and fixing 600x450mm bevelled edge mirror of superior glass complete with 6mm thich hard board ground fixed to wooden cleats with CP brass screws and washer complete.

Providing and fixing C.P. brass towel rail complete with brackets to wooden cleats with C.P. brass screws. (b) 600x20mm size.

Providing and fixing liquid soap container with C.P. brass lid and brackets to wooden cleats with the same materials etc complete. (a) (i) Glass container with CP lid and bracket

Providing and fixing on wall face SWRPVC soil,waste and vent pipe including jointing with rubber lubricant/ cement solvennt complete. (a) 110mm

Providing and fixing on wall face SWRPVC soil,waste and vent pipe including jointing with rubber lubricant/ cement solvennt complete. (a) 75mm

Providing and fixing Health faucet with flexible tube upto 1 metre long and holder of quality and make as approved by Engineer - in - charge.

Providing and fixing SWRPVC plain bend of required degree including jointing with rubber lubricant/cement solvent complete. (a) 110mm

Providing and fixing SWRPVC plain bend of required degree including jointing with rubber lubricant/cement solvent complete. (a) 75mm

Providing and fixing single equal SWRPVC plain junction of required degree. (a) 100x100x100x100mm.

Providing and fixing single equal SWRPVC plain junction of required degree. (b) 75x75x75x75mm.

WATER SUPPLY

Dismantling GI pipes( external Work) including excavation and refilling trenches after taking out pipes, including stacking of pipes within 50 metres lead

Providing and fixing CPVC pipes complete with CPVC fitting for water supply including clamps at one metre spacing, cutting and making good the walls etc. (internal works).Exposed on walls. (a) 15mm dia. nominal bore

Providing and fixing CPVC pipes complete with CPVC fitting for water supply, including trenching and refilling etc. (external work). (b) 20mm dia. nominal bore

Extra for concealed in brick and RCC works by making chases upto 7.5x7.5cm in walls and making good the same after housing pipes, etc.

Providing and fixing brass bib cock of approved quality. (a) 15 mm nominal bore

Providing and fixing brass stop cock of approved quality. (a) 20 mm nominal bore

Providing and fixing on terrace (at all floor levels) Polyethylene storage tank of approved brand and manufacture with cover and mosquito proof coupling and suitable locking arrangement and making nescessary connections for inlet, outlet and overflow pipes but without the cost for base support.

Providing and placing in position electric water pump of approved manufacture including connections to UPVC pipes etc. complete with accessories. (750 watts)

INTERNAL ELECTRIFICATION

Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694(1990) and Flame retardant low smoke & Halogen (FR-LSH)1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping (Gr-II) of different sizes fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from control switch to the light point etc as required: A. TO A LIGHT POINT (B ) Short point

Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694(1990) and Flame retardant low smoke & Halogen (FR-LSH)1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping (Gr-II) of different sizes fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from control switch to the light point etc as required: A. TO A LIGHT POINT(C) Medium point

Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694(1990) and Flame retardant low smoke & Halogen (FR-LSH)1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping (Gr-II) of different sizes fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from control switch to the light point etc as required: A. TO A LIGHT POINT(G) Two point controlled by one switch

Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694(1990) and Flame retardant low smoke & Halogen (FR-LSH)1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping (Gr-II) of different sizes fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from control switch to the light point etc as required: A. TO A LIGHT POINT (H) Three point controlled by one switch

Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694(1990) and Flame retardant low smoke & Halogen (FR-LSH)1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping (Gr-II) of different sizes fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from control switch to the light point etc as required: B. TO A WALL FAN POINT; (B ) Medium point

Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694(1990) and Flame retardant low smoke & Halogen (FR-LSH)1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping (Gr-II) of different sizes fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from control switch to the light point etc as required:C. TO A EXHAUST FAN POINT (B ) Medium point

Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694(1990) and Flame retardant low smoke & Halogen (FR-LSH)1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping (Gr-II) 30x12mm fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from DB to the power plug/socket 15/16A point etc. as required :-(E) Very Long point

Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694(1990) and Flame retardant low smoke & Halogen (FR-LSH)1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping (Gr-II) 30x12mm fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from DB to the power plug/socket 15/16A point etc. as required :-(E) Very Long point

Wiring in parallel system with PVC wire sheathed standard copper conductor/wires as per IS:694(1990) and Flame retardant low smoke & Halogen (FR-LSH)1100 voltage graded copper flexible wire stranded copper running inside PVC Casing & capping (Gr-II) 20x12/25x12/32x12/38 40X15/20mm dia' fixed,surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from Main to Sub-Main/DB/Sub-Main/DB to SDB/SDB/Switch boards/SDB to switch boards as required:- (A) 2x2.5 sqmm

Wiring in parallel system with PVC wire sheathed standard copper conductor/wires as per IS:694(1990) and Flame retardant low smoke & Halogen (FR-LSH)1100 voltage graded copper flexible wire stranded copper running inside PVC Casing & capping (Gr-II)25/30/38mmx15mm dia' fixed,surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from Main to Sub-Main/DB/Sub-Main/DB to SDB/SDB/Switch boards/SDB to switch boards as required:- (C ) 4X 6 Sqmm copper conductor/cable + 2X6 Sqmm earthwire

Supplying of all types of FL/CFL/LED Ceiling mounted mirror optics/fibre cover/industrial type surface type with electronic ballast/ballast, condenser /electronic filter etc.in complete as follows:-(a) 42W LED Havells Pluto Neo Panel 2x2 Recess type*

Supplying of all types of FL/CFL/LED Ceiling mounted mirror optics/fibre cover/industrial type surface type with electronic ballast/ballast, condenser /electronic filter etc.in complete as follows:-(b) 12W LED Havells Edgepro Round Recess type*

Supplying of all types of FL/CFL/LED Ceiling mounted mirror optics/fibre cover/industrial type surface type with electronic ballast/ballast, condenser /electronic filter etc.in complete as follows:-(c) 6W LED Havells Edgepro Round Recess type*

Supplying of all types of FL/CFL/LED Ceiling mounted mirror optics/fibre cover/industrial type surface type with electronic ballast/ballast, condenser /electronic filter etc.in complete as follows:-d) 20W LED Havells Pluto 2x1 Recess type*

Supplying of all types of FL/CFL/LED Ceiling mounted mirror optics/fibre cover/industrial type surface type with electronic ballast/ballast, condenser /electronic filter etc.in complete as follows:-e) 15W LED Havells Pluto 1x1 Recess type*

Supplying of all types of FL/CFL/LED Ceiling mounted mirror optics/fibre cover/industrial type surface type with electronic ballast/ballast, condenser /electronic filter etc.in complete as follows:-f) 20W LED Havells Batten Surface type*

Installation,testing and commissioning of pre-wired fluorescent light fitting/CFL/LED of all types with all accessories and tube etc. directly on the wall/ceiling including connection with 1.5sqmm PVC insulated copper conductor single core cable etc. in complete

Supplying of pre-wired ceiling fan as per IS:374 (1979) in a set including standard down rod, canopy, AC ceilingWall fan machines,regulator etc. in completed as folows:- (a) Bracket wall mounting fan 400mm sweeps Mist air Ultra/Stiker High speed ISI marked (Usha/equivalent)

Supplying of pre-wired ceiling fan as per IS:374 (1979) in a set including standard down rod, canopy, AC ceilingWall fan machines,regulator etc. in completed as folows:- b) Exhaust fan 230mm sweeps ISI marked ( Usha/Havells/equivalent)

Installation, testing and commis-sioning of ceilling fan/wall mounted fan and regulator,including wiring the down rod of standard length ( upto 30cm ) with 2X1.5 Sqmm copper conductor single core etc as required:-

Installation of Exaust fan up to 450mm sweep in the existing opening, including making holes to suit the size of the above Exaust fan, and making good the damage, connection, testing and commissioning etc, as required

Extra for fixing of the gravity louvers/shutters complete with frame for Exhaust fan of all sizes in completed

Supplying of Cable lugs(copper) of different sizes as mention below :- (a) 4Sqmm

Supplying of Cable lugs(copper) of different sizes as mention below :- (b) 6 Sqmm

Supplying and fixing of different numbers of ways MCB DB double door, SP&N, TP&N in sheet steel phosphatised powder painted MCB DB Bus Bar, Neutral link, earth Bar and Din rail conforms to IS:13032, IS:8623, BS:5486 240/415 volts 50Hz. AC supply on surface including inter-connection, painting etc, in completed as follows:- (18) 4-ways MCB DB TP&N Double Door

Supplying,fitting & fixing in complete of all types and rating of maniature circuit breaker(MCB) TP & N and SP L/G series 240/415 volts 50Hz in the existing MCB DB complete with connection, testing & commissioning etc, in completed as follows:- (1) MCB SP B series 5-32 Amps

Supplying,fitting & fixing in complete of all types and rating of maniature circuit breaker(MCB) TP & N and SP L/G series 240/415 volts 50Hz in the existing MCB DB complete with connection, testing & commissioning etc, in completed as follows:- (11) MCB FP 40Amps B-Series

Providing and fixing of Metal clad, FP switch fuses unit ( SFU), 415/500 volts with HRC fuses including drilling holes on the boards, connections, earthing the body etc. as required. (05) 63 Amps Metal clad switch fuse unit with ISI marked HRC fuses TP & N, Category-B

Supplying and fixing of Modular switch board of the following sizes/modules on surface/recess including PVC/Steel boxes,modular plate and necessary switches, plug/socket, and fan regulators etc. with necessary painting if necessary A. ONE MODULE 1) 1S

Supplying and fixing of Modular switch board of the following sizes/modules on surface/recess including PVC/Steel boxes,modular plate and necessary switches, plug/socket, and fan regulators etc. with necessary painting if necessary B. TWO MODULE 13) 2S

Supplying and fixing of Modular switch board of the following sizes/modules on surface/recess including PVC/Steel boxes,modular plate and necessary switches, plug/socket, and fan regulators etc. with necessary painting if necessary C. THREE MODULE 33) 3S

Supplying and fixing of Modular switch board of the following sizes/modules on surface/recess including PVC/Steel boxes,modular plate and necessary switches, plug/socket, and fan regulators etc. with necessary painting if necessary D. FOUR MODULE 56) 2S + 1Soc

Supplying and fixing of Modular switch board of the following sizes/modules on surface/recess including PVC/Steel boxes,modular plate and necessary switches, plug/socket, and fan regulators etc. with necessary painting if necessary E. SIX MODULE 95) 4S + 1Soc

Supplying and fixing of Modular switch board of the following sizes/modules on surface/recess including PVC/Steel boxes,modular plate and necessary switches, plug/socket, and fan regulators etc. with necessary painting if necessary E. SIX MODULE 91) 3S + 1Soc + 1Bkp

Supplying and fixing of Modular switch board of the following sizes/modules on surface/recess including PVC/Steel boxes,modular plate and necessary switches, plug/socket, and fan regulators etc. with necessary painting if necessary F. EIGHT MODULE 156) 5S + 1Soc + 1Bkp

(11) Advance maintenance free earthing of different dia,length and wall thickness copper/Galvanized bond electrode provding masonery enclosure with cover plate having locking arrangment and water pipe, etc. ( but without charcoal or coke and salt ) complete as required.

(42) Supplying & Laying of 25mmx5mm copper strip in 40mm dia' G.I pipe from earth electrode, etc. as required.

(38) Supplying & Laying of 8 SWG Copper Wire at .50mbelow ground level for conductor earth electrode, including soldering etc. as required.

(55) Supplying and drawing of 1.5sqmm, PVC Sheathed alluminium conductor for loop earhting in the existing PVC cassing & capping along with other wires in completed

FIRE SAFETY MEASURES

Supply Installation Testing and Commissioning of of 8 Zone Digitl Addresable microprocessor based fire alarm panel with 12v/15Ah battery and in build battery charger

Supply. Installation, Testing & commissioning of of photo electric multi detector with base plate.

Supply Installation Testing and Commissioning of manual call point with base plate

Supply Installation Testing and Commissioning of hooter / sounder

Wiring Laying of fire alarm system with 2cr x 1.5 sq mm copper cable, wall mounted with all accessories.

S/F of fire extinguisher type CO2 2 kg complete with all accessories.

S/F of fire extinguisher type ABC 4kg complete with all accessories.

S/F of fire extinguisher type mechanical foam 9L complete with all accessories.

SUPLLYING & Installation of of 80 mm dia. Pipe

SUPLLYING & Installation of 80 NB F/VALVE

Supply Installation Testing and Commissioning of Single headed landing Hydrant Valve (G.M) IS mrkd

S/F of RRL Hose pipe with M/F coupling (G.M) IS mrkd

S/F of short branch pipe (G.M)

Supply Installation Testing and Commissioning of of Hose cabinet (750 x 600 x 250) 18 SWG thick M.S fabric

Supply Installation Testing and Commissioning of 2 way fire brigade inlet connection 63 mm dia. Build-in non- return valve instantaneous coupling type.

Supply Installation Testing and Commissioning Fire EXIT board (radium)

Providing and fixing on terrace (at all floor levels) Polyethylene storage tank of approved brand and manufacture with cover and mosquito proof coupling and suitable locking arrangement and making nescessary connections for inlet, outlet and overflow pipes but without the cost for base support.

CHAIR, TABLE & SOFA

Supplying of auditorium chair with seat and back of PU foam, seat with auto tip facility ,armrest with a provision of cup holder, frame is to be fixed to a foundation. etc as per technical specification.

Supplying of revolving mid back chair with seat and back of PU foam and with base of five prong made of black colour reinforced plastic and pnuematic up and down with one point locking mechanism and as per detail given in technical specification

Supplying or manufacturing of table for tarining hall of size 700x450x750 mm (LxBxH) with material of pre laminated particle board. As per technical specification .

Supplying 3 (three) seater sofa with leather seat cover as per details given in technical secification.

Supplying of centre table as per detail given in the technical specifications.

Supplying of coffee/Side table as per detail given in the technical specifications.

R. Liantluanga

M/s AIE Construction