REPAIR, PAINTING AND POLISHING OF WOODEN AND STEEL FURNITURE AND REPAIR, RECANNING, REWEAVING OF CHARPOYS AT AGE CHH SAMBHAJINAGAR AND MIL STN BHUSAWAL UNDER GE(S) AHILYANAGAR

Amount

Works to be executed at AGE Chh Sambhajinagar

M&L for removing of userviceable 3 way elbow of GI charpoy and supply and fix new 3 way elbow 32mm dia, medium grade ISI marked weight not less than 450 Grams of each directed. FD-220

M&L for removing unserviceable check nut of GI charpoy and supply and fix new check nut 32mm dia all as directed . FD-220

M&L for removing of unserviceable long rail of GI charpoy and supply and fix new long rail 32mm medium grade, ISI marked of make TATA/Jindal/Swastik/Zenith including cutting, threading at both ends and fixing all asspecified and as directed. FD-220

M&L for converting the unserviceable long rail obtained from item No 3 above into two short rail including cutting threading at both ends and fixing all as directed. FD-220

M&L for removing of unserviceable short rails of GI charpoy and converting the same into two legs including cutting, threding at one end fixing all as directed. FD-220

Removing of unserviceable plywood of GI Charpoy and supply and fix new plywood 12mm thick of size 1980x900 BWP ply of grade - A - 710, place ad fix over the four equidistant stiffener with 12 Nos of flat head bolt of 6 mm dia and 50 mm long having nylon insert nut and round washer of 25 mm external dia complete all as specified and directed.

M&L for removing unserviceable wooden parts from chair dining and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed.. FD-279/228/16M

Rear legs

Front legs

Rear/front/side rails

Stiffners (with brackets)

Back rest

M&L for removing unserviceable wooden parts from chair writing and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD-280, FD-250

Rear legs

Front legs

Rear/ front/ side rails including cane holes

Stiffners

Back rest

Arms rest

M&L for removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD -229 , FD-17

Rear legs

Front/rear/rails including cane holes

Side rails for seat including cane holes

Front /rear/stiffeners

Side rails for back rest including cane hole

Upper /lower rails for back rest including cane

Arms rest

M&L for removing unserviceable plastic cane from chairs, bin soil linen and stool dressing and recanning with 2mm wide and canning boarder 3/4 wide cane all as specified and as directed. (Make of cane : Komal or equivalent as approved by GE) FD-279, 244,228, 280, 229, 27M

M&L for removing unserviceable wooden parts from table & Teapoys and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed.

Legs for table dining 6/8 pers FD-30, 273, 239

Front/rear rails of table dining 6/8 pers FD-30, 273, 239

Side long rails for table dining 6/8 pers FD-30, 273, 239

Centre rails of table dining 6/8 persons FD-30, 273, 239

Leg of table 3'x2' without/ with drawer FD-283, 231, 284

Front/rear rails of table 3'x2' without/ with drawers FD-283, 231, 284

Side rails of table 3'x2' without/ with drawers FD-283, 231, 284

Drawers of table 3'x2' FD-283, 231, 284

Front /rear/ top/bottom rails of table writing FD-249/275

Legs of table writing FD-249/275

Stiffeners of table writing FD-249/275

Side rails of table writing FD-249/275

Legs of table centre FD-29, 335, 274

Front/rear rails of table centre FD-29, 335, 274

Stiffeners of table centre FD-29, 335, 274

Bottom rails for table centre FD-29, 335, 274

Legs of table 2' x 2' FD-95M, DB-4085

Front/rear/side rail of table 2 x 2 FD-95M, DB-4085

Leg of table 3 x 3 FD-88M

Front/rear/side rails of table 3 x 3 FD-88M

Legs of table dining 4x3 FD-273

Side rails of table dining 4x3 FD-273

Legs of peg table FD-25, 236, 277

Bottom rail of peg table FD-25, 236, 277

Top rail of peg table FD-25, 236, 277

Leg of teapoy FD-34, 232, 225

Top rail of teapoy FD-34, 232, 225

Bottom rail of teapoy FD-34, 232, 225

M&L for removing unserviceable wooden parts from sofa set and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specied and as directed. FD- 281, FD-373

Legs of sofa chairs 70 x 35 x 30mm

Arms rest of sofa chairs 70X35X725mm

Wooden bearer 40X40X670mm

Wooden batten 50X20X670mm

Wooden rails 35X100X670mm

Wooden frame for head 70X35X600mm

Wooden rails to support back frame 30X50X670mm

Wooden bearer 40X40X1730mm

Wooden rail 35X100X1730mm

Wooden frame for back 70X35X1660mm

M&L for removing unserviceable wooden parts from bed hard and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD-246

Short rails of bed hard

Long rails of bed hard

Stiffners of bed hard

Front leg of bed hard

Rear legs of bed hard

CHAIR DINING WITH LONG BACK : (FD-357)

Removing existing unserviceable rear legs and S&F new rear legs made out of Teak Wood of size 25x50mm made to shape out of 60x50mm all as specified and shown on drawing.

Removing unserviceable front legs and S&F new front legs made out of Teak Wood of size 25x50mm all as specified and shown on drawing.

Removing unserviceable front/rear/side rails and S &F new front/rear/side rails made out of Teak Wood of existing size all as specified and shown on drawing.

Removing the existing unserviceable stiffeners and S&F new stiffeners made out of Teak Wood of existing size all as specified and shown on drawing.

Removing the existing unserviceable plywood 10mm and S&F new plywood 10mm thick of existing size all as specified and shown on drawing.

Removing the existing unserviceable seat covered by leatherised ragzine and Supply and fix new seat 50mm thick synthetic foam of 20 density with covered by leatherised ragzine (made to shape) of chair dining with long back all as specified and shown on drawing.

Removing the existing unserviceable back covered by leatherised ragzine and Supply and fix new back 50mm thick synthetic foam of 20 density with covered by leatherised ragzine (made to shape) of chair dining with long back all as specified and shown on drawing.

Removing unserviceable hard rubber rings and S&F new hard rubber rings all as specified and shown on drawing.

CHAIR WRITING CUSHIONED : (FD/E6/ MAP/12)

Removing the unserviceable seat and S&F new seat as per existing size made out 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around. Polyurethane foam shall be 50mm thick all as specified and shown on drawing.

Removing the unserviceable back and S&F new back as per existing size made out 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. Back form shall be designed with contour lumber support for extra comfort with PVC lipping all around as specified and shown on drawing.

Removing the unserviceable arm rest of chair writing and S&F new arm rest made of black integral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant & both hand rest sections to have slope towards front and as shown on drawing.

CHAIR COMPUTER : (FD/E6/MAP/01)

Removing the unserviceable seat and S&F new seat of size 510x470x60mm made out 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around all as specified and shown on drawing.

Removing the unserviceable back and S&F new back as per existing size made out 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. Back form shall be designed with contour lumber support for extra comfort with PVC lipping all around as specified and shown on drawing.

Removing the unserviceable arm rest of chair computer and S&F new arm rest of black integral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant and as shown on drawing.

Removing the unserviceable tubular frame of chair computer and S&F new tubular frame cantilever type and made of 25mm dia and powder coated for computer chairs and as shown on drawing.

Removing the unserviceable hydraulic shaft of chair computer and S&F new hydraulic shaft alongwith locking system for computer chairs and as shown on drawing.

Removing the unserviceable adjustable backrest of chair computer and S&F new adjustable backrest in the range of 65mm and can be locked in 5 steps for better support as per existing size as shown on drawing.

Removing the unserviceable twin wheel castors of chair computer and S&F new twin wheel castors of black colour as per existing size as shown on drawing.

CHAIR SCHOOL WITH HAND BOARD - (FD/E6/MAP/5)

M&L for replacement of hand board of chair school of Make Godrej or equivalent as approved by GE all as specified and shown on drg.

M&L for replacement of Seat of chair school Make Godrej or equivalents as approved by GE all as specified and shown on drg.

M&L for preparation of frame of chair school with hand board, wherever required shall be welded and scrapping/ cleaning of frame & painting with one coat of synthetic enamel paint black in colour all specified and as directed by Engineer-in-charge.

M&L for removing of unserviceable plywood from bed hard and S&F new ply wood 12mm thick commercial all as specified and as directed. FD-245, 246 Make : Kitply/Green ply/Archid/Century as approved by GE

M&L for removing unserviceable drawer from the table dressing gents and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drawing and applying french polish as required all as specified and as directed. FD-230

M&L for removing unserviceable top frame of table dressing gents and S&F new top frame to the existing table dressing gents and applying french polish as required all as specified and shown on drawings. FD-230

M&L for removing unserviceable looking mirrior with frame from the table dressing gents and S&F new mirrior with frame to the existing table dressing gents with mirror and applying french polish as required all as specified and as directed. FD-230 Make of the mirror : Modi guard or equivalent as approved by GE

M&L for removing unserviceable Knob from table dressing gents and S&F new Knob of approved quality and as directed.

M&L for removing unserviceable drawer from the table dressing ladies and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drg and as directed by Engr-in-charge. FD-251, FD-32

M&L for removing unserviceable top frame of table dressing ladies and S&F new top frame to the existing table dressing ladies duly french polished as reqd or as per specification given in drawing. FD-251, FD-32

M&L for removing frame with Mirror of the table dressing ladies and S&F new frame with Mirror to the existing table dressing ladies duly french polished wherever required. Make of mirror Modiguard. FD-251, FD-32

M&L for removing unserviceable back base ply with mirror from table dressing ladies and S&F new back base ply with mirror duly french polished as reqd. Make of mirror Modiguard. FD-251, FD-32

M&L for removing broken unserviceable sliding glass shutter and aluminium channel and S&F new glass shutter and aluminium channel to the existing table dressing ladies . FD-251, FD-32

M&L for removing unserviceable back from side board and S&F new 6mm thick plywood commercial of same size duly french polished as reqd all as specified and as directed. FD-26/ 241

M&L for removing unserviceable drawers from side board and S&F new drawers made out of 12mm commercial plywood of same size and applying french polish as reqd as directed. FD-26/ 241

M&L for removing unserviceable door shutter from side board and S&F new door shutter of 18/19mm thick prelaminated particle board one side teak face and other side white teak wood beading all around all as specified and as directed. FD-26/ 241

M&L for removing unserviceable knob from side board and S&F new knob with suitable screw all as specified and as directed.

M&L for removing unserviceable top from side board and S&F new top of size 19/18mm thick prelaminated particle board one side teak face and other side white all as per drawing all as specified and as directed. FD-26/ 241

M&L for removing unserviceable legs from table dressing ladies and S&F new legs made out of 1st class hard wood teak wood duly french polished as reqd as per specification and as directed by Engr-in-charge. FD-251, FD-32

M&L for spot welding of steel furniture items of broken joints etc, not exceeding 2.5cm in length and thickness 6mm including scraping, preparing the surface of welded portion by grinding and buffing to make fit for painting and applying two coats of synthetic enamel paint over a coat of red oxide on welded portion by sprayer complete . Note:- Make of paint shall be Apcolite by Asian paints or equivalent or as approved by GE.

M&L for removing the unserviceable tops from the following tables and S&F new tops made out of 18/19mm prelaminated particle board, one side teak finish and other side balancing white and fixing the same with the existing tables with suitable screw incl beading all around to the tops duly french polished as specified and as directed.

Table writing FD-249, 275

Table centre FD-29, 335, 274

Top for teapoy verandah FD-35, FD-255

Table 600X600mm FD-95(M), DB-4085

Table 3X3 FD-88M

Table dining 4'x3' FD-273

Table peg FD-25, 236, 277

Teapoy FD-34, 232, 225

Table dining 6 persons FD-30, 273, 239

Table dining 8 person FD-30, 273, 239

Table 3X2 without & with drawer FD-283, 231, 284

Table Computer with drawer. FD/E6/MAP/03

M&L for removing unserviceable Parts of Table bed Side (MAP) and replacing with 12mm thick MDF board with suitable rivet/nut and bolt screw all as specificied and shown on drawings. FD/E6/MAP/15(R)

M&L for removing unserviceable hasp and staple 75mm chromium plated and fixing to steel shutter and locker bed side steel with suitable rivet/nut and bolt screw as shown on drawings all as specified and as directed. FD-1029, FD-257

M&L for removing unserviceable CP Handle from locker bedside & providing new CP handle 100mm and fixing with suitable screw /bolt to shutter of locker bedside steel all as specificied and shown on drawings. FD-1029, FD- 257

M&L for removing unserviceable hinges from locker bedside and S&F new hinges with suitable welding to locker bed side steel all as specificied and shown on drawings. FD-1029, FD- 257

M&L for removing unserviceable legs from locker bed side and S&F new legs made out of 1.00 mm thick black sheet and fixing to locker bedside steel with suitable welding the legs shall be painted with one coat of red oxide primer and two coats of synthetic enamel paint with match the existing all as specificied and and as directed. FD-1029, 257

M&L for removing unserviceable shutter of locker bed side and S&F new shutter to locker bed side steel made out of 1mm thick plain black sheet and painted with one coat of red oxide primer and two coats of synthetic enamel paint match with existing paint as shown on drawing all as specified and as directed FD-1029, FD- 257

M&L for removing unserviceable conduit pipe and S&F new 20mm mild steel conduit pipe with socket to locker bedside steel all as specificied and shown on drawings. FD-1029, FD- 257

M&L for removing unserviceable handle from almirah large and almirah medium steel with shelves and providing new handle for almirah large steel and almirah medium steel with shelves as per specifications and shown on drawing all as specified and as directed. FD-75, 243, 1031, 1032

M&L for removing unserviceable locking device of Almirah large steel with shelves and providing new locking device including cover as per specification and shown on drawing and for directed. FD-75, 243, 1031

M&L for removing unserviceable lock from Almirah large/ medium steel with shelves and S&F new Godrej or equivalent as approved, 6 levers lock with duplicate key all as specified and shown on drawing and as directed by Engr-in-charge. FD-75, 243, 1031, 1032

M&L for removing unserviceable shelves from Almirah large steel with shelves and S&F new shelves for Almirah large steel with shelves made out of 1.00mm thik black sheet as per specified and shown on drawing all as specified and as directed. FD-75, 243, 1031

M&L for removing unserviceable legs from Almirah large steel with shelves and Almirah medium steel with shelves and S&F new legs made out of 1mm thick black sheet as specified and shown on drawing all as specified and as directed. FD-243, FD-1031, FD-1032

M&L for removing unserviceable clips and providing new clips to shelves of almirah large steel with shelves and med steel with shelves as specified and shown on drawing and as directed. FD-243, FD-1031, FD-1032

M&L for removing unserviceable locks from table office clerk and table office officer steel and S&F new locks to table clerk steel and table office officer steel all as specified and as directed. FD-1003, 1004

M&L for removing unserviceable hand rest from chair CB steel with arms and S&F new hand rest made out of 1st class hard wood Indian teak wood to the existing chairs CB steel with arms as specified and directed. FD-75(M)

M&L for removing unserviceable seat & back from chair CB steel with arms and supply and fix new seat and back for chair CB steel with arms duly painted for following :-

Seat of chair CB steel with arms FD-75M

Back of chair CB steel with arms

M&L for removing unserviceable seat & back from chair CB steel without arms and supply and fix new seat and back for chair CB steel without arms duly painted for following :- FD-75M

Seat of chair CB steel without arms

Back of chair CB steel without arms

M&L for removing old unserviceable seat from chair CBA spl and S&F new seat made out of 1st class hard wood Indian teak wood duly canned with 2mm plastic cane to the existing and as directed. FD-75M

M&L for removing old unserviceable back of chair CBA spl and S&F new back of chair made out of 1st class hard wood Indian teak wood duly canned with 2mm plastic cane to the existing and as directed . FD-75M

M&L for removing unserviceable seat and back in one piece made out of PVC and S&F new PVC seat & back in one piece with suitable nut bolt/screw to the existing frame. Make- Supreme/Cello/Polyset or Blowplast and as directed. FD/E6/MAP-05

M&L for removing unserviceable prelaminated MDF board top 18mm thick openable and S&F with suitable hinged & screw on right hand side to 25mm dia mild steel pipe inserted in 20mm dia rod welded to frame. FD/E6/MAP-05

M&L for removing unserviceable hand rest from chair CBA special with hand rest made out of 1st class hard wood Indian teak wood as per size shown on drawing duly polished as specified and directed by Engr-in- charge. FD-75(M)

M&L for removing unserviceable plastic cane from chair verandah and recanning with 4/5mm half round plastic cane good quality including painting of chair verandah all as specified and as directed. (Make of cane : Komal or equivalent as approved by GE) FD-256, FD-19M Make of paint : Apcolite by asian paints (high glossy) or equivalent as approved by GE.

M&L for removing unserviceable plastic cane from wooden chair easy and recanning with 4/5mm half round plastic cane good quality including applying french polish of required gloss complete all as specified and as directed. (Make of cane : Komal or equivalent as approved by GE) FD-229, 17

M&L for removing unserviceable planks from form without back and S&F new plank made out of 1” class Indian teak wood to the existing form without back as per specification given in drawing. FD-77

M&L for removing unserviceable Seat/Back cushion from sofa set to seat five,four and three and S&F 100mm thick cushion foam 40 density of size 22x21 inches duly covered & stiched with tapestry cloth. Note- Tapestry cloth shall be of Bombay Dyeing /Raymond furnishing /"D" Décor , colour of cloth will be approved by GE. (FD-281, FD-373) Make of foam : Sleepwell/Curlon or equivalent as approved by GE.

M&L for removing unserviceable tapestry cloth cover from the existing sofa foam cushion and S&F new cushion cover made out of good quality tapestry coth rate not less than Rs 250/- per mtr and as per sample approved by GE including provn of Zip at one side of cover, rest all as specified in drawing. (FD-281, FD-373) Make : D Decor/ Raymonds/ Bombay Dying

M&L for removing unserviceable frame of square tube from form without back and S&F new square tube wherever required to existing form without back with suitable welding all as shown on drawing. FD-77M

M&L labour for painting to the frame of form without back with one coat of synthetic enmal paint black to existing form without back all as per specification and shown on drawing FD-77M

M&L for removing dent and bents of following steel furniture articles and applying one coat of synthetic enamel paint by sprayer including preparation of surfaces complete all as specified and as directed.

Almirah large steel with shelves FD-67, 243, 1031

Almirah med/small with shelves FD-243, 1032

Locker bed side steel FD-1029, 257, 1039

Table with drawer steel FD-1008

Table office clerk steel FD-1004

Table office officer steel FD-1003, FD-84(M)

Table dining ORs FD-165M

Chair CB steel with arms FD-75(M)

Chair CB steel without arms FD-75(M)

Chair verandah steel with white paint FD-256, FD-90(M)

Chair CBA special FD-75M

M&L for removing existing polish of following wooden furniture and applying melamine by Asian Paints /Nerolac/Berger paints strictly as per manufactures instructions all as specified and as directed. Note : Colour of polish shall be as approved by GE

Book shelf open small FD-4121

Book shelf open large FD-4121

Bed hard FD-246/ FD-247, FD-21

Chair WB without arms FD-225/ FD-285/ FD-56

Chair writing FD-280/ FD-250

Chair dining FD-279/ FD-16M/ FD-228, FD-226

Chair easy FD-229, FD-17, FD-201

Sofa set 4 seater FD-281, FD-373

Sofa set 5 seater FD-281, FD-373

Table centre FD-29, FD-335, FD-274

Table peg FD-25, FD-236, FD-277

Table dining 6 person FD-239, FD-30, FD-273

Teapoy FD-34, FD-232, FD-225

Table bed side FD-248

Table dressing Gents with mirror FD- 230

Table dressing ladies with mirror FD-251, 32

Table writing FD-249, FD-275

Table dining 8 pers FD-30, FD-273, FD-239

Bin soil linen FD-224

Side Board FD-241

Works to be executed at AGE Bhusawal

M&L for removing of userviceable 3 way elbow of GI charpoy and supply and fix new 3 way elbow 32mm dia, medium grade ISI marked weight not less than 450 Grams of each directed. FD-220

M&L for removing unserviceable check nut of GI charpoy and supply and fix new check nut 32mm dia all as directed . FD-220

M&L for removing of unserviceable long rail of GI charpoy and supply and fix new long rail 32mm medium grade, ISI marked of make TATA/Jindal/Swastik/Zenith including cutting, threading at both ends and fixing all asspecified and as directed. FD-220

M&L for converting the unserviceable long rail obtained from item No 69 above into two short rail including cutting threading at both ends and fixing all as directed.

M&L for removing of unserviceable short rails of GI charpoy and converting the same into two legs including cutting, threding at one end fixing all as directed. FD-220

M&L for removing of existing wornout newar of GI charpoy and reweaving the charpoy with new 50/55mm wide nylon newar of vergin quality weighing not less than 1.50 Kg per charpoy after tightening the loose components including provn of 3mm thick 50mm dia MS circular plate welded to the legs all as directed. Note : Reweaving shall be closely done on both side. FD-220

M&L for removing unserviceable lock from Almirah large/ medium steel with shelves and S&F new Godrej or equivalent as approved, 6 levers lock with duplicate key all as specified and shown on drawing and as directed by Engr-in-charge. FD-75, 243, 1031, 1032

Removing of old unserviceable locks of modular tables and cupboards and S&F new locks with duplicate keys Make : Standard or equivalent as approved by GE.

M&L for removing unserviceable handle from almirah large and almirah medium steel with shelves and providing new handle for almirah large steel and almirah medium steel with shelves as per specifications and shown on drawing all as specified and as directed. FD-75, 243, 1031, 1032

M&L for removing unserviceable locking device of Almirah large steel with shelves and providing new locking device including cover as per specification and shown on drawing and for directed. FD-75, 243, 1031

Removing of old unserviceable Shutter of Almirah Large steel and S & F new shutter made of MS sheet 1mm thick all as per drg and directed. FD-1031

M&L for removing unserviceable shelves from Almirah large steel with shelves and S&F new shelves for Almirah large steel with shelves made out of 1.00mm thik black sheet as per specified and shown on drawing all as specified and as directed. FD-75, 243, 1031

M&L for removing unserviceable locking device of Almirah medium steel with shelves and providing new locking device including cover as per specification and shown on drawing and for directed. FD-1032

M&L for removing unserviceable shelves from Almirah medium steel with shelves and S&F new shelves for Almirah medium steel with shelves made out of 1.00mm thik black sheet as per specified and shown on drawing all as specified and as directed. FD-1032

Removing of old unserviceable Shutter of Almirah medium steel and S & F new shutter made of MS sheet 1mm thick all as per drg and directed. FD-1032

M&L for removing unserviceable legs from Almirah medium steel with shelves and S&F new legs made out of 1mm thick black sheet as specified and shown on drawing all as specified and as directed. FD-1032

M&L for removing unserviceable clips and providing new clips to shelves of almirah large steel with shelves and med steel with shelves as specified and shown on drawing and as directed. FD-243, FD-1031, FD-1032

M&L for removing unserviceable shutter of locker bed side and S&F new shutter to locker bed side steel made out of 1mm thick plain black sheet and painted with one coat of red oxide primer and two coats of synthetic enamel paint match with existing paint as shown on drawing all as specified and as directed FD-1029, FD- 257

M&L for removing unserviceable shelves from locker bed side and S&F new shelves for locker bed side made out of 1mm thick plain black sheet and painted with one coat of red oxide primer and two coats of synthetic enamel paint as per specified and shown on drawing all as specified and as directed. FD-257

M & L for removing existing unserviceable drawers from table office officer & table office clerk, S&F new drawer from 1mm thick MS steel duly painted with olive green synthetic enamel paint over a coat of primer and as specified and directed by Engineer-in-charge. FD-84(M), FD-1004

Removing of old unserviceable top of Table office clerk steel , and S&F new 'top' made out of prelaminated particle board exterior grade 18 mm thick make-novapan/eco board and 6 mm thick teak wood beading shall be provided all around of 'top' duly french polishing all as specified'showing on drg and as directed. FD-1004

M&L for removing unserviceable plastic cane from seat of chair writing and recanning with 2mm wide plastic cane good quality in Godrej pattern complete all as specified and as directed. (Make of cane : Komal or equivalent as approved by GE) FD-280

M&L for removing unserviceable plastic cane from seat of chair dining and recanning with 2mm wide plastic cane good quality in Godrej pattern complete all as specified and as directed. (Make of cane : Komal or equivalent as approved by GE) FD-279, FD-228

M&L for removing unserviceable wooden parts from chair dining and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed.. FD-279/228/16M

Front legs

Rear/front/side rails

Rear legs

M&L for removing unserviceable plastic cane from wooden chair easy and recanning with 4/5mm half round plastic cane good quality including applying french polish of required gloss complete all as specified and as directed. (Make of cane : Komal or equivalent as approved by GE) FD-229, 17

M&L for removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD -229 , FD-17

Rear legs

Front legs

Arms rest

Removing existing unserviceable seat/ back frame of Chair easy and supply & fixing new seat/ back frame of first class teak wood duly french polished and with holes for canning and supply & canning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern) all as specified and directedall as specified and directed. FD-229

M&L for removing unserviceable drawer from the table dressing ladies and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drg and as directed by Engr-in-charge. FD-251, FD-32

Removing of old unserviceable back ply of Table Dressing ladies and S & F new ply 6mm thick all as specified and shown on drg.

M&L for removing unserviceable back base ply with mirror from table dressing ladies and S&F new back base ply with mirror duly french polished as reqd. Make of mirror Modiguard. FD-251, FD-32

M&L for removing unserviceable legs from table dressing ladies and S&F new legs made out of 1st class hard wood teak wood duly french polished as reqd as per specification and as directed by Engr-in-charge. FD-251, FD-32

Removing of old unserviceable top of Table Dressing Gents and S & F new Top with 12mm prelaminated particle board all as specified and shown on drg. FD-230

M&L for removing unserviceable drawer from the table dressing gents and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drawing and applying french polish as required all as specified and as directed. FD-230

Removing of old unserviceable back ply of Table Dressing Gents and S & F new ply 6mm thick all as specified and shown on drg.

M&L for removing unserviceable looking mirrior with frame from the table dressing gents and S&F new mirrior with frame to the existing table dressing gents with mirror and applying french polish as required all as specified and as directed. FD-230 Make of the mirror : Modi guard or equivalent as approved by GE

Removing of old unserviceable bottom ply wood of Table Dressing Gents and and S & F new 8mm thick plywood all as specified and shown on drg.

Removing existing unserviceable cane from seats of Chair Office CB and chair Office CBA and supply & caning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern) all as specified and directed. DB-4134, WDF-10

M&L for removing unserviceable knob from tables, side board etc and S&F new knob with suitable screw all as specified and as directed.

Removing of old unserviceable Top of wooden locker bed side and S & F Top made of 18mm thik prelaminated partical board exterior grade, ISI Mark Make-Novapan/Ecoboard or equivalent as approved by GE all as specified and shown on drg. FD-222

Removing of old unserviceable bottom and all legs of wooden locker bed side and S & F Top made of 18mm thik prelaminated particle board exterior grade, ISI Mark Make-Novapan/Ecoboard or equivalent as approved by GE and legs made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss of all as specified and shown on drg. FD-222

Removing of old unserviceable front door of wooden locker bed side and S & F new front door all as specified and shown on drg. FD-222

Removing of old unserviceable leg of locker bed side and S & F leg of teak wood made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss of all as specified and shown on drg. FD-222

Removing of old & unserviceable Hasp & staple of locker bed side and S & F new Hasp & staple 75mm ISI Mark all as per drg and directed.

Removing of old & unserviceable ply from back side of locker bed side and S&F new ply 6mm thik ISI mark make-Kitply/National all as specified and shown on drg.

M&L for one coat of spray painting with first quality synthetic enamel paint of approved color on both inside and outside of bed side locker after cleaning by sand paper all as directed.

Removing of old unserviceable piano hinges of locker and fixing new steel approved quality piano hinges all as specified and shown on drg.

M&L for one coat of spray painting with first quality synthetic enamel paint of approved color on stool 2' Height, after cleaning by sand paper complete all as directed. F-2

Removing of damage plywood top of Bed hard Modern furniture moulded and supply and fix new 12 mm thick commercial plywood ISI Mark all as per drawing Make of Plywwod : Kit ply/ Anchor /Bhutan Board/Archild lam/Green lam. FD-2005/07

M&L for removing of unserviceable plywood from bed hard and S&F new ply wood 12mm thick commercial all as specified and as directed. FD-245, 246 Make : Kitply/Green ply/Archid/Century as approved by GE

M&L for removing unserviceable wooden parts from bed hard and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD-246

Long rails of bed hard

Stiffners of bed hard

Front leg of bed hard

Rear legs of bed hard

M&L for removing the unserviceable tops from the following tables and S&F new tops made out of 18/19mm prelaminated particle board, one side teak finish and other side balancing white and fixing the same with the existing tables with suitable screw incl beading all around to the tops duly french polished as specified and as directed.

Table writing FD-249, 275

Table centre FD-29, 335, 274

Top for teapoy verandah FD-35, FD-255

Table peg FD-25, 236, 277

Table dining 6 persons FD-30, 273, 239

Table dining 8 person FD-30, 273, 239

M&L for removing unserviceable wooden parts from table & Teapoys and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed.

Legs for table dining 6/8 pers FD-30, 273, 239

Side long rails for table dining 6/8 pers FD-30, 273, 239

Legs of table writing FD-249/275

Legs of table centre FD-29, 335, 274

Front/rear rails of table centre FD-29, 335, 274

Stiffeners of table centre FD-29, 335, 274

Legs of peg table FD-25, 236, 277

Bottom rail of peg table FD-25, 236, 277

Leg of teapoy FD-34, 232, 225

Top rail of teapoy FD-34, 232, 225

Removing of old unserviceable shutter of Table Writing, and S&F new shutter made out of prelaminated particle board exterior grade 18 mm thick Make: Novapan/ ECO board all as specified showing on drg and as directed. FD- 275, FD-249

Removing of old unserviceable side of Table Writing, and S&F new side made out of prelaminated particle board exterior grade 18 mm thick all as directed. FD- 275, FD-249 Make: Novapan/ ECO board all as specified'showing on drg and as directed.

M&L for removing unserviceable top from table dining ORs and S&F new Top made out of 18/19mm particle board including cover of 22 mm guage aluminium sheet as per specification shown on drawing and as directed. FD-165M

Removing of existing unserviceable rubber shoes of table dining ORs and S&F with hard PVC shoes as per existing shape and size all as specified,showing on drg and as directed.

Removing and replacement of cushions and tapestry cloth best quality not less than Rs 200/- per meter for seat ,back of Chair dining Moulded all as directed by Engineer-in-charge. FD-2005/08

Removing and replacement of cushions and tapestry cloth best quality not less then Rs 200/- per meter for seat ,back of Chair revolving all as directed by Engineer-in-charge. FD-132(M)

Removing the unserviceable hydraulic shaft of chair computer and S&F new hydraulic shaft alongwith locking system for computer chairs and as shown on drawing. F-132(M)

M&L for removing unserviceable hand rest from chair CB steel with arms and S&F new hand rest made out of 1st class hard wood Indian teak wood to the existing chairs CB steel with arms as specified and directed. FD-75(M)

M&L for removing unserviceable Seat/Back cushion from sofa set to seat five,four and three and S&F 100mm thick cushion foam 40 density of size 21x21 inches duly covered & stiched with tapestry cloth. Note- Tapestry cloth shall be of Bombay Dyeing /Raymond furnishing /"D" Décor , colour of cloth will be approved by GE. (FD-281, FD-373) Make of foam : Sleepwell/Curlon or equivalent as approved by GE.

Removing old unserviceable cushion seat and back and S&F new readymade 100mm thick 32 density cushion foam and covered with tapestry cloth (not less than Rs 250/- per meter) duly stitched make-feather foam or sleep well for sofa set 4 seater in two pieces (2+2) modular type including repair to laminations. FD-258, FD-2005/02 & 12

Removing old unserviceable cushion seat and back and S&F new readymade 100mm thick 32 density cushion foam (size of seat of 3 seater 68"x24"x4", back of 3 seater 68"x18"x4", seat of single seater 22"x24"x4", back of single seater 22"x18"x4") and covered with tapestry cloth (not less than Rs 250/- per meter) duly stitched make-feather foam or sleep well for set of sofa set 5 seater in three pieces (3+1+1) modular type complete all as directed. FD-258, FD-2005/02 & 12

Removing old unserviceable legs of side board and supply and fix new legs made out of teak wood duly french polished all as specified and as directed. FD-371

Removing old unserviceable side of side board and supply and fix new side board of 18mm thick prelaminated particle board all as specified and as directed.

M&L for removing unserviceable top from side board and S&F new top of size 19/18mm thick prelaminated particle board one side teak face and other side white all as per drawing all as specified and as directed. FD-371

M&L for removing unserviceable door shutter (2 Nos) from side board and S&F new door shutter (2 Nos) of 18/19mm thick prelaminated particle board one side teak face and other side white teak wood beading all around all as specified and as directed. FD-371

Removing old unserviceable back ply of Table bed side and supply and fix new back ply of 6mm thick ply wood commercial all as specified and as directed. FD-276, FD-248

Removing old unserviceable sides of Table bed side and supply and fix new sides of 18mm thick prelaminated particle board all as specified and as directed. FD-276, FD-248

Removing old unserviceable top of Table bed side and supply and fix new Top of 18mm thick prelaminated particle board all as specified and as directed. FD-276, FD-248

M&L for removing unserviceable plastic cane from chair verandah and recanning with 4/5mm half round plastic cane good quality including painting of chair verandah all as specified and as directed. (Make of cane : Komal or equivalent as approved by GE) FD-256, FD-19M Make of paint : Apcolite by asian paints (high glossy) or equivalent as approved by GE.

M&L for removing dent and bents of following steel furniture articles and applying one coat of synthetic enamel paint by sprayer including preparation of surfaces complete all as specified and as directed.

Almirah large steel with shelves FD-67, 243, 1031

Almirah large steel 1/2H 1/2 Shelve.

Almirah med/small with shelves FD-243, 1032

Chair verandah steel with white paint FD-256, FD-90(M)

Locker bed side steel FD-1029, 257, 1039

Rack Boot. FD-E6/MAP/2

Rack steel 78"x36"x19". FD-106(M)

Rack steel 72"x36"x15". FD-106(M)

Table IT F-6

Table 1520x860x760mm F-130(M)

Table dining Ors FD-165M

Form without back FD-77(M)

Table office clerk steel FD-1004

Table office officer steel FD-1003, FD-84(M)

M&L for removing existing polish of following wooden furniture and applying melamine by Asian Paints /Nerolac/Berger paints strictly as per manufactures instructions all as specified and as directed. Note : Colour of polish shall be as approved by GE

Chair easy FD-229, FD-17, FD-201

Chair dining FD-279/ FD-16M/ FD-228, FD-226

Chair writing FD-280/ FD-250

Table bed side FD-248

Table dining 8 pers FD-30, FD-273, FD-239

Bed hard/ bed newar FD-246/ FD-247, FD-21

Table 600x600x760 FD-293

Sofa set 4 seater FD-281, FD-373

Sofa set 5 seater FD-281, FD-373

Table dining 6 person FD-239, FD-30, FD-273

Table writing FD-249, FD-275

Table 900x600x760 FD-283, FD-224

Table peg FD-25, FD-236, FD-277

Teapoy FD-34, FD-232, FD-225

KAMINS CARE (BID ID -3486386)

MS. G.A. CONSTRUCTION (BID ID -3492064)

Shri Sai Enterprises (BID ID -3483288)