Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
15 Sept 2026, 1:30 pm4d left
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
55
1 condition · 1 needing a document upload
The railway reserves the right to order entire or bulk quantity from firms having satisfactory past performance for same or similar items as per clause no. 16.4 of General Tender Conditions. The firms need to upload copies of performance Railways documents like R/Note, Receipted Challan, Inspection Certificate of the tendered/equivalent items failing which their offers are liable to be ignored. Only uploading of purchase order will not be considered as credential.
34 conditions
Authorisation: In case of authorized dealers, firm has to submit tender specific authorization/dealership from OEM along with the offer, otherwise their offer will be liable to be rejected.
Make/Brand: Maker's name [and/or Brand] must be mentioned in the offer. If no make is mentioned, it will be presumed that stores will be of OWN make.
Delivery Place :FOR SSE/WC (AWM/Crane- I/JMP)
Marking: Manufacture name & date of manufacturing (month & year) should be pasted or marked/embossed on the product box/products without affecting the functional utility of the product. The material should be supplied in properly packed condition. Equivalent IS specification will also be applicable in place of DIN specification.
Guaranty/Warranty: As per Specification/drawing. If not mentioned in specification/drawing, it will be as per IRS conditions of contract.
Confirmation: You have gone through the Tender Documents consisting of Instructions to Tenderers, General Tender Conditions and Special Conditions of Tender, and you are agreed and confirm to abide by the Instructions to Tenderers, General Tender Conditions, IRS Conditions of Contract and the Special Conditions of Tender.
MSE: If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise(in percent of order value) with further breakup of MSE owned by SC/ST. (Information will be provided in % terms with 6 fileds; Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others)
PVC: PVC clause will not be applicable in this tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. Please refer to clause 28.0 for details.
Delivery from OEM's place: If you are dealer/authorized person, you are agreed to dispatch the stores directly from the manufacturer to the Railways consignee.
Proper address with PIN no of the Place of Inspection along with proof as per Tendered Condition must be mentioned
Valid UDYAM, specifically for Tendered Item must be submitted if applicable.
GST: (A) It shall be the responsibility of the Bidders to quote correct HSN Number and corresponding GST Rate, (B) The offer shall be evaluated based on the GST rate quoted by each bidder and same will be used for determining the inter-se-ranking. While submitting offer, it shall be the responsibility of the Bidder to ensure that they quote correct GST rate and HSN number, (C) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder, (D) Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase Order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed, (E) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order, (F) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
MTC and MGC must be provided by the firm at the time of inspection as well as at the time of supply of materials.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Inspection by Consignee at JMP(W) against GC/WC.
These items are not available on GeM Portal.
The supplied material shall be mandatorily covered under guarantee/warranty for a period of 30 (thirty) months from the date of supply, against any manufacturing defects, material failure, or workmanship issues. All other terms and conditions shall strictly be as per the latest applicable IRS terms and conditions, and no deviation shall be permitted. The prevailing Government of India policy on procurement of indigenous items shall be strictly complied with, and non- compliance shall render the offer liable for rejection.
Manufacturer's name and the month & year of manufacturing shall be clearly pasted, marked, or embossed on the product and/or product packing, without adversely affecting the functional utility of the product. The material shall be supplied in proper, secure, and damage- free packing condition.
1 condition
Offer validity: Offer must be valid for minimum 90 days from the date of tender opening.
1 location across Bihar · 17,388 Numbers total
WASHER TO DRG
55266494~ER
55266494
Open - Indigenous
Goods
Bihar
₹0
Exempted
22 Aug 2026
22 Aug 2026
14 items · 17,388 Numbers total
PLAIN WASHER 1/4 INCH DIA (ZN PLATED) . Drg No. IP-83002-014 ALT-X [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 1242.00 Numbers |
| Total | 1,242 Numbers | |
PLAIN WASHER SIZE 26MM SPECN.IS 2016- 67,WITH AMENDMENT 1 TO 4 TAB-2,TYPE-A MATE RIAL SPECN IS:2062-11 E250A FINISH GALVANISED TO SPECN IS:1573-86 TO SERVICE GRADE NO.2 OF TAB. 2. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 1104.00 Numbers |
| Total | 1,104 Numbers | |
INTERLOCK WASHER SUITABLE FOR M16 BOLT (MAKE/TYPE -DISC LOCK/NORD LOCK/DURLOC K) SPECN ICF/MD/SPEC-331 ISSUE STATUS-01,REV.00 SPECIAL CONDITIONS. (1) INTERLOCK WASHERS SHAL L BE COATED/ PLATED WITH ENVIRONMENT FRIENDLY COATING. (2) INTERLOCK WASHERS SHALL BE PROC URED AS PAIRS GLUED TOGETHER TO FASTEN AS SUCH. [ Warranty Period: 30 Months after the date of d elivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 184.00 Numbers |
| Total | 184 Numbers | |
SPRING LOCK WASHER 1/4 INCH DIA ZN PLATED TO DRG. NO. 15393148 ALT -'T'. [ Warrant y Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 1656.00 Numbers |
| Total | 1,656 Numbers | |
SPRING LOCK WASHER B12 TO IS:3063-94 AND MATERIAL SPECN. TO IS: 4072-75, AMENDME NT NO 02 GRADE-3, GALVANISED TO SPECN. IS:1573-86 TO SERVICE GRADE NO. 2 OF TABLE 2. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 5014.00 Numbers |
| Total | 5,014 Numbers | |
SPRING LOCK WASHER B22 TO IS: 3063-94 AND MATERIAL SPECN. IS:4072-75, AMENDMENT NO 02 GRADE-3, GALVANISED TO SPECN. IS:1573-86 TO SERVICE GRADE NO. 2 OF TAB.2 [ Warranty Peri od: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 736.00 Numbers |
| Total | 736 Numbers | |
WASHER TO DRG./SPECN. NO EMU/M-3-2- 058 ALT-b ITEM-1 [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 736.00 Numbers |
| Total | 736 Numbers | |
SPRING WASHER OF SIZE B8 MADE OF STAINLESS STEEL CONFORMING TO IS:3063-94, AISI-3 04. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 874.00 Numbers |
| Total | 874 Numbers | |
SPRING LOCK WASHER B10; IS:3063-94 AND MATERIAL SPECN TO IS:4072-75 GRADE-3 [ War ranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 1288.00 Numbers |
| Total | 1,288 Numbers | |
SPRING LOCK WASHER B16 TO IS:3063-94 AND MATERIAL SPECN. IS:4072-75 GRADE-3 AMEN DMENT-02, GALVANISED TO SPECN. IS:1573-86 TO SERVICE GRADE NO. 2 OF TABLE 2.. 000. 00000000 [ W arranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 506.00 Numbers |
| Total | 506 Numbers | |
M.S.PLAIN WASHER SIZE 18. TO IS: 2016-67 WITH AMENDMENT NO.1 TO 4 TAB-2 TYPE A, MA TERIAL SPEC IS : 2062-2006, E 250A FINISH GALVANISED TO SPEC IS: 1573-86 TO SERVIC GRADE NO. 2 OF TAB-2. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 1472.00 Numbers |
| Total | 1,472 Numbers | |
PLAIN WASHER SIZE 30 IS: 2016/67 WITH AMENDMENT NO. 1 TO 4 TAB-2 TYPE-A MATERIAL S PECN. IS: 2062-2006, E-250A FINISH GALVANISED TO SPECN IS: 1573- 86 TO SERVICE GRADE NO. 2 OF TAB .2. SPECIFICATIONS : IS: 2016/67 WITH AMENDMENT NO. 1 TO 4 TAB-2 TYPE-A, IS: 2062-2006, E-250A AND IS: 1573-86 TO SERVICE GRADE NO. 2 OF TAB.2. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 1472.00 Numbers |
| Total | 1,472 Numbers | |
WASHER DRG NO. ICF/STD-3-2-003, ITEM-2 , ALT `b/2. [ Warranty Period: 30 Months after t he date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 368.00 Numbers |
| Total | 368 Numbers | |
M.S.PLAIN WASHER SIZE 22 TO IS: 2016-67 WITH AMENDMENT NO.1 TO 4 TAB-2 TYPE A MAT ERIAL SPEC IS : 2062-2006, E 250A FINISH GALVANISED TO SPEC IS: 1573-86 TO SERVICE GRADE NO. 2 OF TAB-2. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/Crane Shop-2, ER | Bihar | 736.00 Numbers |
| Total | 736 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
089-3-2-058-1-1-SB--A3.pdf
ATTACHMENT
3268327.pdf
ATTACHMENT
089-3-2-003-1-1-SL-07-A2.pdf
ATTACHMENT
1677180.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .