REPAIR/MAINTENANCE OF STREET LIGHTS AND PERIMETER LIGHTS AT AFS AMLA

Amount

Taking down unserviceable street light fitting/ floodlight fitting LED type 25 Watts to 100 Watts from existing pole after disconnecting the supply & sealing the cable ends for carrying out repair/maintenance at site/workshop and re-fixing the same on pole, connecting up and testing on completion all as specified and directed. Note: - Spares parts changed herein shall be measured and paid seperately against item No 1.01 to 1.04 herein after.

Supply only Electronic driver suitable for LED 35 Watt.

Supply only Electronic driver suitable for LED 60 Watt.

Supply only Electronic driver suitable for LED 90 Watt.

Supply only surge protection device for outdoor LED fittings upto rated power of 90 Watt.

Supply and fix in repair 40mm bore GI pipe bracket bent to shape drilled welded made out of light grade GI Pipe 0.9 mtr long for fixing of street light fitting of any type and description including suitable size of MS clamps, nuts, bolts & washers including two coat of aluminium paint over one coat of red oxide primer after taking down old serviceable one complete all as specified & directed. complete all as specified & directed.

Supply and fix in repair 32mm bore GI pipe bracket bent to shape drilled welded made out of light grade GI Pipe 0.9 mtr long for fixing of street light fitting of any type and description including suitable size of MS clamps, nuts, bolts & washers including two coat of aluminium paint over one coat of red oxide primer after taking down old serviceable one complete all as specified & directed. complete all as specified & directed.

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth; for laying cables/pipes and getting out in hard/dense soil complete all as specified and directed.

Excavation in trench exceeding 1.5 metre but not exceeding 3 metre in depth and not exceding 1.5 metre in width and getting out in hard/dense soil all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified & directed.

Taking down old unserviceable 2 core X 10 Sq mm LT cable either from trenches / wall / pole complete all as specified & directed. Note : Earthwork , DWC pipe , GI pipe will be measure and paid separately.

Taking down old unserviceable 3.5 / 4 core X 16 to 35 Sq mm LT cable either from trenches / wall / pole complete all as specified & directed. Note : Earthwork ,Sand cushioning, DWC pipe , GI pipe will be measure and paid separately.

Supply & laying including connecting and testing of XLPE armoured LT 2 core X 10 Sq mm underground cable, 1100 volts grade heavy duty aluminium standard conductor with PVC insulated, including suitable sizes of aluminium lugs and gland packing complete all as specified & directed. Note : Earth work , DWC pipe , GI pipe will be measure and paid separately

Ditto- all as per item No.10 here in before but XLPE armoured LT 4 core X 16 Sq mm complete all as specified & directed.

Ditto- all as per item No.10 here in before but XLPE armoured LT 4 core X 25 Sq mm complete all as specified & directed.

Ditto- all as per item No.10 here in before but XLPE armoured LT 3.5 core X 35 Sq mm complete all as specified & directed.

Taking down old unserviceable 2 Core 10 Sq. mm to 3.5 Core 25 Sq mm LT cable either from trenches / wall / pole for repair of cables and re-laying / re-fixing in the same location including re - connecting and testing on load old unserviceable LT cable complete all as specified & directed. Note : Earthwork, DWC pipe, GI pipe will be measure and paid separately.

Taking down old unserviceable 3.5 Core 35 to 95 Sq mm LT cable either from trenches / wall / pole for repair of cables and re-laying / re-fixing in the same location including re - connecting and testing on load old unserviceable LT cable complete all as specified & directed. Note : Earthwork, DWC pipe, GI pipe will be measure and paid separately.

Taking down/out steel tubular LT poles of 9 mtr long from trenches and re-fixing in the other location including re-connecting of street light fittings and testing on load complete all as specified and directed. Note: - Earth work and PCC work shall be measured and paid separately.

Supply & laying 50 mm bore (HDPE) DWC pipe first quality after taking down old un serviceable one complete all as specified and directed.

Supply & laying 90 mm bore (HDPE) DWC pipe first quality after taking down old un serviceable one complete all as specified and directed.

M&L for Earthing complete with GI earth plate electrode 60 cm x 60cm x 6.0mm thick and buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to GI earth plate with GI wire of size 04 mm by means of bolts, nuts and washers of Steel all as shown in electrical plate No. 3 including PCC pit (1:3:6) type C-1 in cement concrete 40 mm thick precast RCC cover in (1:2;4) type B-1 reinforced with 8 mm dia MS round bar @ 75 c/c both ways with 01 No lifting handle of 12mm dia MS plain bar, GI pipe 15 mm dia light grade for GI wire protection and GI tubing 20 mm for watering including GI funnel with wire mesh etc complete all as specified and directed by Engineer-in-charge.

Supply & fixing of PVC insulated twin core 2.5 Sq. mm unsheathed multistranded aluminium conductor including connecting, taking down old u/s wire complete all as specified and directed.

Supply & fixing on pole / wall 20 mm bore PVC conduit heavy duty including taking down old u/s pipe complete all as specified and directed.

Material and labour 40 mm bore GI tubing light grade laid in trenches/ fixed to poles, walls etc for protection of service cable complete all as specified and directed.

Ditto- all as per item No. 22 here in before but 50 mm bore GI tubing light grade complete all as specified & directed.

Supply & fixing in repairs mild steel monkey cage frame made up of angle iron size 30 mm X 30 mm X 04 mm thick, 1.40mm dia wire net having size of mesh 25mm and flat 30mmx4mm thick for protection of post top lantern including necessary nuts, bolts, welding etc., and two coat of aluminium paint over one coat of red oxide primer complete all as specified and directed. Note: - The shape and size of cage shall be as per sample cage existing at site/office of AGE E/M (or) the shape and size shall be as recommended by Engg-in-charge.

Supply & fixing 35 watt rating integral LED street light fitting including bulb comprising of epoxy powder coated housing enclosed with glass cover in frame IP 65 protection after taking down old serviceable one complete all as specified & directed.

Supply & fixing 60 watt rating integral LED street light fitting including bulb comprising of epoxy powder coated housing enclosed with glass cover in frame IP 65 protection after taking down old serviceable one complete all as specified & directed.

Supply & fixing 90W LED Flood Light with pressure die-cast housing with epoxy powder coated dark graphite grey colour finish with IP 66 protection mounted on pole after taking down old serviceable one complete all as specified & directed.

Supply & fix junction box IP 65 with metric knockouts for cable entry up to 25 Sq mm, Box size 225 x 255 x 112 mm with terminals including MCB SP 6A and fixed on pole with MS clamps and applying two coats of aluminium paint over a coat of red oxide primer including taking down old one complete all as specified and directed. Make: HENSEL Cat No : DK - 2525G or equivalent as approved by GE

Supply & fix junction box IP 65 with metric knockouts for cable entry up to 50 Sq mm, Box size 255 x 355 x122 mm with MCB 04 pole 63 Amp and fixed on pole with MS clamps and applying two coats of aluminium paint over a coat of red oxide primer including taking down old one complete all as specified and directed. Make: HENSEL Cat No : DK - 5054G or equivalent as approved by GE

Supply & fix Junction box with gland IP 65 with metric knockouts for cable entry up to 70 Sq mm , Box size 300 x 450 x170 mm with 04 terminals / bus bar rating 150 Amp including GI Clamps , nuts , bolts & washer after taking down old one complete all as specified and directed . Make: Make: HENSEL Cat No : K - 7004 or equivalent as approved by GE

Supply & fix flame proof junction box on pole / wall having internal dimension 160 mm X 160mm X 110 mm , IP 65 protection including two no's connector of suitable size for up to 25 Sq mm aluminium conductor including clamp , nuts , bolts & washers after taking down old one complete all as specified and directed.

Supply & fixing in repair MCB DP 06 to 32 Amp including taking down old one complete all as specified and directed.

Supply & fixing in repair MCB 04 pole 40 Amp including taking down old one complete all as specified and directed.

Supply and fixing in repair MS clamps fabricated using flat iron 40 mm x 5 mm drilled, welded, bent to shape making holes suitable for steel tubular /PCC poles including nuts bolts/washers and applying two coats of aluminium paint over a coat of red oxide primer including taking down old one complete all as specified and directed.

Dismantling of old concrete poles any size complete all as specified and directed.

Supply & Erection of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified ype 410 SP-31 (9.00 metres long) including two coat of aluminium paint over one coat of red oxide primer complete all as specified & directed.

Material & Labour for applying two coats of aluminium paint on Steel tubular LT poles including painting to cross arms and clamps etc., after necessary preparation of surfaces by scrubbing and cleaning with wire brush complete all as specified & directed.

Material & Labour for marking serial number on existing pole with black luminous words on luminous yellow round sticker as per sample shown by Engineer-in-Charge complete all as specified and directed.

Supply & fixing 40 watt IP 65 protection LED flame proof well glass light fitting including Clamps nuts , bolts & washers complete on pole/wall after taking down old one complete all as specified and directed. Make: Cat part no. Cat part no. FWL1315-40-CDL of Crompton Greaves (or) equivalent in M/S Sudhir/ M/S Baliga/ Bajaj

Supply & fixing 40 watt with IP 65 Protection decorative LED Post top lantern after taking down old one complete all as specified and directed.

Material & Labour for cement concrete nominal mix 1:4:8 type D-2 using 40mm graded aggregate as in foundations, filling and mass concrete including necessary form work complete all as specified and as directed.

Material & Labour for cement concrete 1:3:6 type C-2 using 40 mm graded aggregate as in foundations, filling and mass concrete including necessary form work complete all as specified and as directed.

M&L for cement concrete nominal mix type B1, 1:2:4 (using 20 mm graded stone aggregate) for coping of poles etc including necessary form work complete all as specified and directed.

Material & Labour for MS LT cable route marker embedded on PCC block having size 300 X 300 X 600 mm nominal mix type B1(1:2:4) including earth work, formwork complete all as specified and directed.

Supply & fixing 100 Watt LED Flood Light with pressure die-cast housing with epoxy powder coated dark graphite grey colour finish with IP 66 protection mounted on pole after taking down old serviceable one complete all as specified & directed.

Supply & fix in repair Astro time switch single phase 02 module including taking down old one complete all as specified and directed. Make: Cat no AUTS02AST00 of L&T (or) equivalent in Legrand / C&S

Supply & fix in repair 3 Pole Power Contactors of type MNX 9, 240V AC of size Fr 1; including taking down old one complete all as specified and directed. Make: Cat part no CS94106 of L&T (or) equivalent in ABB / Siemens

Supply & fix in repair 3 Pole Power Contactors of type MNX 12, 240V AC of size Fr 1; including taking down old one complete all as specified and directed. Make: Cat part no CS94108 of L&T (or) equivalent in ABB/ Siemens

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

Paragon Electrotechnics