Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-Finance HIMACHAL PRADESH HP | MANDI | HIMACHAL PRADESH | 175047 | ₹4.1 L | L1 | Accepted-Finance ok |
| 2 | L2₹4.3 L+₹12,147 (2.94%)Rejected-Finance BADIYAR A PO NANDPUR TEHSIL JUBBAL DISTT SHIMLA H P | JUBBAL | SHIMLA | HIMACHAL PRADESH | ₹4.3 L+₹12,147 (2.94%) | L2 | Rejected-Finance ok |
Tender Value
₹4.0 L
EMD Value
₹8,100
Closing Date
2 Sept 2026, 6:00 pmClosed
Executive Engineer
HPPWD JUBBAL
Sh Construction of Roof over old building
2026_PWD_142184_1
6707-10, Dated 27.08.2026
Open Tender
Civil Works - Buildings
Percentage
Jubbal
Please refer Tender documents.
9 documents required · 9 mandatory
₹350
₹8,100
18 Sept 2026
27 Aug 2026
3 Sept 2026
27 Aug 2026
2 Sept 2026
27 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 2,786.83 | kg | 86.65 | ₹2,41,478.82 |
| 2 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.1. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm TORK with zin cooling not less than 275 gm/m² | 108.04 | Per Square metre | 837.3 | ₹90,461.89 |
| 3 | Providing ridges or hips of width 60 cm overall width plain G.S sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mmm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² | 14.6 | Meter | 550.9 | ₹8,043.14 |
| 4 | Providing and fixing 15 cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 10x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 275 gm/m² 0.63 mm thick with zinc coating not less than 275 gm/m² | 36.6 | Meter | 538.45 | ₹19,707.27 |
| 5 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on bath side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerinne sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 45.33 | Per Square metre | 592.45 | ₹26,855.76 |
| 6 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%j total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: Barge board (Upto 300 mm) | 36.6 | Meter | 336.4 | ₹12,312.24 |
| 7 | Providing and fixing 100 mm diameter and 60 cm In rain water spout in cement mortar 1:4 (1 cement: 4 fine sand). Stone ware sonu | 4 | Each | 99.4 | ₹397.6 |
| 8 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for therinal expansion, (i) Single socketed pipes. 110 mm diometer | 11.2 | Meter | 260.55 | ₹2,918.16 |
| 9 | Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm | 4 | Each | 117.8 | ₹471.2 |
| 10 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 110 mm | 12 | Each | 187.2 | ₹2,246.4 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
sbd.pdf
Tender Documents • 2.61 MB
BOQ_211130.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .