Raising floor of back yard residence no.- T-II-5/1 and other works of T-II/5 Block at Canal Colony, Cantt Road, Lucknow. (Lot-27)

Amount

Sand filling in Back Yard

Providing & laying Cement concrete 1:4:8 ( 1 cement : 4 coarse sand: 8 graded stone ballast 40 mm nominal size) including supply of all materials, labour and T&P etc. required for proper completion of work and curing complete. Also including cost of formwork in foundation and floors.

Providing and laying 40mm thick 1:2:4 cement coarse sand and stone ballast 6.7mm nominal size with Murga Jali including all material, Labour,T&P and curing complete.

Dismantling cement concrete or brick or granolithic floors, including base concrete and including stacking of dismentled materials as directed by the Engineer -in-charge with in a distance of 60m.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigmentsetc. complete. size of tile 600x600mm

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 Ltrs

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 500 Ltrs

Fly proof Stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide apreture with matching wood beading

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

P/F P.V.C. Pipe 110 mm dia 6Kg. Presser I.S.I. make

M/S MOHD JAVED