REPAIR TO JOINERY, TILING, SANITARY FITTINGS AND MISC BR WORKS IN OTM ACCN UNDER ZONE-I AREA AT JAIPUR MIL STN

Amount

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Taking down of shutters of any description exc 2 sqm each complete all as specified and directed.

Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each without taking off shutters from the frame complete all as specified and directed.

Taking down door chowkaht or frame of any description area exc 1.50 Sqm but n exc 4 Sqm each without taking off shutters from the frame complete all as specified and directed.

S & F mild steel framed work as in door frame of angle or other section and fixed with angle cleats and connecting plates etc of Gde E-165 (Fe-290) complete all as specified and directed. Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003.

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F steel window with side hung shutters factory made including box type hinges with steel handle and steel peg stay compete with glazing bars devetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary.

S&F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary.

S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle complete all as specified and directed.

S&F 300mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc.

S & F 150mm long aluminium handles, cast type anodised complete all as specified and directed.

S & F 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified.complete all as specified and directed.

S & F 150mm long aluminium anodised barrel tower bolts of extruded sectionand fixed complete all as specified and directed.

S & F 100mm butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and directed.

S & F aluminium door stopper 75mm size with double pin and rubber shoe fixed to bottom rail of door shutter complete all as specified.

S & F galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples.

S & F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples.

M&L cutting holes in stone walls built in Cement Mortar exc half but n exc one brick depth or embeded portion of hold fast or lugs incl making good to distrubed portion in CM 1:3 or PCC 1:2:4 type B1 as required complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from window frames glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 3.00mm thick ordinary quality and glazing with beads fixed with metal panel pin in square n.exc 0.5 Sqm each.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work confirming to Fe 290 Gde E-165.

M & L preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation new Steel Surfaces of any description, over 10cm in width or girth, not otherwise described applying two coats synthetic enamel paint over a coat of red oxide zinc chrome primer

Supply and fixing anodised aluminium frame for door , windows, ventilators with one or more rebates incl jointing cleat for fixing etc complete all as specified and directed.

Supply and fixing anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

Supply and fixing anodised aluminium window and ventilator shutters, side hung typewithout sash, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium fittings such as peg stays 150mm long 1 No, hinges type B-21, 100mm long (2 No) suitable handle 1 No complete all as specified and directed.

M&L for 09 mm thick prelaminated particle board interior grade, prelaminated both side with decorative choice lamination fixed with screw .

S&F sheet glass 4.00 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane.

M&L for solar control film 25micron reflective type sticked to glass panes as per instruction of manufaturer.

S & F brass mortice lock verticle type size 65mm, 4 levers with escutcheon plates and two keys fixed in aluminium frame.

M & L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed.

S&F in repair Door closer aluminium anodized extruded section body hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg.

S&F in repair drappery rod / curtain rod with brackets and all accesories of stainless steel complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S & F rolled steel section as in girder built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections Fe- 290 (Gde E- 165).

M & L 75 mm thick stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. Punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4. complete all as specified and directed.

Taking down cement plaster or cement lime plaster/ tiles of any descrption on PCC/ stone surface/ brick surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M & L Rendering 15 mm thick on stone masonry wall surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 15mm thick on stone masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L Rendering 10 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M & L preparing new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M & L preparing new plastered surfaces and applying two coats of cement base paint on wall complete all as specified and directed.

M&L preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion of any tint over a coat of primer complete all as specified and directed.

M&L preparation of old decorated surfaces of walls, pillars and cornices, including brooming down and cleaning the surfaces and applying one coat of white wash complete all as specified and directed.

All as per item No 1 above but one coat of white wash on ceiling surface.

M&L preparation of old decorated surface of walls including brooming down and cleaning the surfaces and applying one coat of distemper of approved tint complete all as specified and directed.

M&L preparation of old decorated surface of walls including brooming down and cleaning the surfaces and applying two coats of distemper of approved tint complete all as specified and directed.

M&L preparation of old decorated surface of walls including brooming down and cleaning the surfaces and applying two coat of cement base paint of any approved tint complete all as specified and directed.

M&L preparation of old decorated surfaces of walls and applying one coat of cement base paint of approved tint complete all as specified and directed.

M&L preparation of old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint all as specified and directed.

M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 25mm thick plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor complete all as specified and directed.

M & L coloured non skid ceramic tiles 300x300x7mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L glazed coloured ceramic tiles 300x450x7 mm thick on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set over 15mm thick screed in CM 1:6 jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade complete all as specified and directed.

M&L Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,on vertical surfaces such as skirting, dados and risers to steps ,wall etc set over 10 mm thick cement plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match colour of the tile complete all as specified and directed.

M & L coloured glazed ceramic joint free tiles 400x400x7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L coloured glazed joint free ceramic tiles 400x100x7 to 8mm thick in vertical surface as in skirting over & including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as specified and directed.

M & L 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregates in sub base complete all as specified and directed.

M & L chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20mm screed bed in CM 1:6 complete all as specified and directed.

S & F in repair vitreous china squatting pan 'Orissa' pattern water closet white size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc complete all as specified and directed.

S & F in repair vitreous china wash basin, white flat back size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP coupling , PVC waste pipe complete all as specified and directed.

S & F as in repair fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore.

Taking up or down steel tubing and connection including cleaning 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning 20 mm bore complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning 25 mm bore complete all as specified and directed.

S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S&F GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S&F in repair 15 mm bore bib tap fancy type chromium plated cast copper alloy with cruth or butter fly handle screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm.

S&F in repair 15 mm bore Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S & F in repairs Vitreous China wash down water closet pan (Pedestal pattern), white including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous China urinals, bowl type(back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repair 25 mm bore stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified and directed.

S&F in repair 15 mm bore stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified and directed.

S&F in repair 15 mm bore angle stop valve cast copper alloy chromium plated screwed for iron pipe or union complete all as specified and directed.

S&F in repair 125mm size chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 25 mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic bal screwed for iron pipe and fixed (Minimum Weight 210 gms).

S&F in repair PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement

S&F in repair Brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges

Schedule of Credit

M/S S R CONSTRUCTION

JAGDAMBA CONSTRUCTION COMPANY

M/S JALANDRA CONSTRUCTIONS

M/S M P Sharma

Smita Constructions