Construction of new building of Pt. JLN. Govt. College at Sector-16, Faridabad Providing 630 KVA oil type Transformer).

Amount

RUBBER MATTING Providing and fixing of insulated robber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS code 15652-40091) as per specification complete and as per directions of Engineer-in-charge

G.O.SWITCH Supply, erection, testing & commissioning of G.O. Switch two poles, with blade, pin 6 insulators operating handle with GI pipe 25 mm class B complete in all respects.

SAFETY ITEMS Supply and erection of High Tension Voltage caution plate of size 250x200 mm in three languages.

Supply & Erection of mild steel bucket stand suitable for 6 nos. fire buckets, (but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect upto the entire satisfaction Engineer in charge of the work (size 6'x4' made of GI pipe 32 mm dia)

Earthing and lightening arrestor Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required

Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required

Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode

Supplying and laying 25 mm x 3 mm G.I. strip in 40 mm dia, GI pipe as / from earth electrode including soldering etc. as required

Providing and fixing 25 mm x 3 mm G.I. strip on surface or in recess for connections etc. as required with all labour and material

Providing and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe form earth electrode as required.

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 145/123 mm outer dia/ inner dia

LT Cable Supply and erection of suitable compression type brass cable glands for underground Cable : 240 sqmm to Cable 3 to 32 Core

300 sqmm to 400 sqmm Cable 3 to 3½ Core

Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work . 70 sqmm

HT CABLE Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 70 to 120 sqmm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 70 to 120 sqmm

RCC FOUNDATIONS FOR D.G. SET Providing RCC foundation of M20 grade (1 cement :1.5 store aggregate : 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50 mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-Charge. 750 KVA DG set (1 no. foundation is for 630 KVA OIL TYPE TRANSFORMER)

Supply and erection of underground cable in pipe /existing open/closed trench complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work. 70 Sq. mm 3.5 Core Cable.

95 Sq. mm 3.5 Core Cable.

240 Sq. mm 3.5 Core Cable .

300 Sq. mm 3.5 Core Cable .

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning the following sheet steel cubical outdoor type panels fabricated from 1.6mm thick CRCA sheet, dead-front construction, dust and vermin proof, indoor type TPN Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with separate cable alley and lockable bus-bar chamber including supplying and fixing following switchgears and accessories, inter-connections, bonding to earth, powder coated painting as per following specifications :- other specifications as per DNIT in PDF

Supply, Erection, testing and commissioning of Transformer-630 KVA 11/0.433 K. V.3 Phase-50 cycles copper wound outdoor type as per latest IS specification efficency level 3 confirming to IS 1180 and IS 2026 with losses at 50% load 1637W, 100% load 4438 W duly laid on existing foundation at site of work, along with petty works required up to the entire satisfaction of the Engineer-in-charge of work as per detailed specification given as under: No. load voltage ratio 11/0.433 K V. No. of Phase = 3 Frequency cycles = 50HZ Type- double wound core type copper wound Cooling = ONAN Duty = Outdoor Vector group/ISS-DYN 11 Tapping on HV Compensation +5.0% To-10% in steps of 2.50%. Temperature rise (oil/Res = 0C) 40/45 C Attitude= upto 1000metres above M.S.L. Fitting/Accessories Provided. Bucholez relay with alarm and trip contact. OFF LOAD TAP CHANGER Externally hand operated. Oil conservator with Filling hole & cap. Plain oil level guage with minimum Level marking.other specifications as per DNIT in PDF

Supply, installation, testing and commissioning of HT panel 1 way RMU type V+M outdoor type Make ABB/Siemens/ Schneider complete upto the entire satisfaction of the Engineer - in - Charge as per specification as under :- with standard protection devices other specifications as per DNIT in PDF

Supply, installation, testing and commissioning of APFC panel complete upto the entire satisfaction of the Engineer - in - Charge as per specification as under :- APFC PANEL (220KVAR) 220KVAR Automatic power factor correction panel in 9 steps (50 KVAR x 3 + 25 KVAR x 1 + 15kVAR x 2 + 5kVAR x 3) consisting of following 400Amps 433V FP 50KA Manual Fixed Type Moulded Case Circuit Breaker (MCCB) with Thermal mangetic based release for over current and magnetic short circuit as incomer to APFC Panel (with TMA release) (Make: ABB /Siemens/ Schneider/L&T) = 1 no. APFC RVC Relay for 9 steps (Make: ABB /Siemens/ Schneider / L&T) = 1 no.other specifications as per DNIT in PDF

Supply & erection of lightning arestor of W.S./ G.E. make SDU suitable for 11KV 3 Phase 50cycle grounded neutral system comprising of spark gap type quench gap types in series with non lineer register element housed in horizental seals porcelin bushing with line ground terminal alongwith mounting clamp conforming to ISS-3070 part-II of 1985 with latest ammendments with all labour and meterial required up to the entire satisfaction of Engineer -in-charge of work

Supply & erection of fire existinguishers ISI mark( CO2 type 4.5 kg. Capacity as per IS:7285 duly erected/ hang on wall with hooks with all labour and material required to complete the job in all respect to the entire satisfaction of Engineer-in-charge of work. Make Safex, AJAY

Supply and erection of stay set with stay wire suitable for 11M long PCC pole made out of 7/3 SWG GI wire with U type M.S. Rod 5/8" dia duly threaded by means of angle iron of size 50 x 50 x 6 mm x 30 cm 6 feet long M.S. Rod buried in ground after fixing with cross channel size 75 x 40 x 6 mm x 60 cm long the stay wire will be binded on the top of the pole with help of suitable size of double U type M.S. Clamps and stay fixed with nuts and bolts the stay wire shall be insulated in the middle point with the help of egg insulator including all labour and material required to complete the job in all respect to the entire satisfaction of Engineer-in-charge of work.

Supply and erection of fire bucket of G.I. sheet of 24 gauge write with " FIRE" as per fire specification.

S/E of M.S. chanel, MS angle, MS flat & nuts & bolts of required size including painting and cutting etc. with labour and material required to complete the job including fixing the same on existing pole complete in all respect

Supply & erection, Commissioning and testing of 11 KV indoor HT metering panel complete with Ct's PT's cubical & electronics meter with accuracy class 0.5. as par requirement / approved by DHBVN consisting of the followings : Cubical panel box standing floor mounting type made out of sheet steel 14 SWG CRCA sheet with channel iron base frame, spray painted with strong synthetic light grey enemal paint as per size and design aproved by DHBVN. 3 Nos. 11KV CT's of suitable rating for indoor installation (As per - approved make of DHBVN). 1 No. 11 KV PT 11000/110 V 10VA burden 0.5 accuracy oil filled suitable for indoor installation of approved make of DHBVN. other specifications as per DNIT in PDF

Supply & installation of MS Shade of Dimensions 15 (L) x 12 (W) (H) feet tom be covered by 2mm thick meter sheet (approx area to be covered 220 sq. feet) including 5 mm ms parking jali having approximate area of 700 sq. ft. metro sheet to be supported by MS pipe of dimension (50x75x3mm) having approximate lenght of 240 feet and MS angle of size 60x6mm having approximate length of 200 feet complete upto the entire satisfaction of the Engineer-in- charge as per specification.

Supply and erection of XLPE 11 or 33 kv HT aluminium conductor armoured cable ISI mark laid on surface/pipe/cable tray with all labour and material as required complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work. 120 Sq. mm 3 Core armoured Cable .

KKM Engineering Solutions Pvt. Ltd.

M/s JSB Enterprises

Ecs Engineering Chd. Pvt. Ltd.

Shree Shyam Associates