Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance BR GADGIL ROAD PUNE MAHARASHTRA 411030 INDIA | PUNE | MAHARASHTRA | 411030 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance N S T COLONY CIRCULAR ROAD HOUSE NO 04 DMC DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
22 Jan 2021, 6:00 pmClosed
AGE I ZAKHAMA
AGE (I) Zakhama C/o 792 FPO PIN-900792 C/O 99 APO
REPAIRS TO BRICK WORK, SANITARY FITTINGS AND ALLIED WORKS AT ZAKHAMA MIL STN
2020_MES_398631_2
8918 rep brick work zak
Open Tender
Civil Works
Item Rate
180 days
ZAKHAMA
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
AGE I ZAKHAMA
₹18,000
Yes
28 Jan 2021
7 Jan 2021
25 Jan 2021
7 Jan 2021
22 Jan 2021
8 Jan 2021
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level) ,complete all as specified and as directed.
Demolitin of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.complete all as specified and as directed.
M & L for 75mm thick PCC type D-2 1:4:8 (using 40mm graded stone aggregate.complete all as specified and as directed.
M & L for 20mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes.complete all as specified and as directed.
M & L for non - skid joint free coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and as directed.
M & L for glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.complete all as specified and as directed.
M & L for non - skid joint free coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and as directed.
All as per item No 5 above but in vertical surface as in skirtings.
M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4), complete all as specified and as directed.
Taking down cement plastering on lathing (other than wire-netting), without removing lathing, (one side only measured in cases where both sides are plastered) complete all as specified and as directed.
M & L for 10mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces of wall for backing of tiles. complete all as specified and as directed.
M & L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces of wall finished even and smooth without using extra cement using WPC (Note WPC measured and paid separataly) complete all as specified and as directed.
M & L for 15mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces of wall to finished even and smooth without using extra cement, complete all as specified and as directed.
Supply only WPC compound ISI Marked, complete all as specified and as directed.
Taking down steel tubing 15mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.
Taking down steel tubing 20mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.
S & F 15mm dia tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.
S & F 20mm dia tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.
S&F in repair Bib Tap 15mm bore (dia), Cast Copper Alloy, Fancy type Chromium Plated with Crutch or Butterfly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.
S&F Pillar Tap 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.
S & F 15mm dia stop cock, fancy type cromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.
S & F 15mm dia angle stop cock, fancy type cromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.
S&F brass Fancy type CP Stop cock with long shank and cup (concealed type) 15 mm dia bore screwed down with crutch handle both end screwed for iron pipe orunion as fixed in repairs, complete all as specified and as directed.
Dismantling of cast iron or reinforced concrete drain pipes ofm any description, jointed in cement mortar and taking out of trenches, if required, complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 110 mm bore.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 75 mm bore. complete all as specified and as directed.
M & L for SGSW drain pipes 150mm dia laid in trenches and jointed as specified, complete all as specified and as directed.
S&F PVC (SWR) bends 75 mm dia with access door. complete all as specified and as directed.
S&F PVC (SWR) bends 110 mm dia with access door.complete all as specified and as directed.
S&F PVC (SWR) vent cowl bore of pipe 75 mm. complete all as specified and as directed.
S&F in repairs vitrous china squatting pan 'Orissa' pattern size 580x440 mm white, with integral foot rest (Excluding flushing cistern and flush pipe) complete all as specified and as directed.
M&L as in repairsVitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces and fixed-in-repairs, complete all as specified and as directed.
M & L for urinal bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes fixed in repairs, complete all as specified and as directed.
S&F PVC valveless, syphonic action type, flushing cistern of 10 liters capacity , low level, white, with inlet, ball valve, float and handle including brackets. complete all as specified and as directed.
S&F Vitreous China Wash Hand Basin 550x 400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed.
S & F ABS Faucet Set CP with shower hose & hook complete all as specified and as directed.(Make : SONA) , Model : Lovely or equivalent
S&F PTMT Towel Rail 450mm long (mini-mum weight 170 Gram), fixed with and including Chromium plated Brass Screws and Wooden/Plastic Cleats and fixed-in-repairs, complete all as specified and as directed.
S&F PTMT Grating Doom 125mm dia (minimum weight 40 Grams) and fixed-in-repairs, complete all as specified and as directed.
S&F PVC connection pipe 15mm dia, 450mm long with PTMT check nuts and washer on both endscomplete all as specified and as directed.
S & F sinks with drainage board made of stainless steel 1mm thick kotchen or laboratory with plugs, washers and wastage, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.
S & F sinks made of stainless steel 1mm thick kotchen or laboratory with plugs, washers and wastage, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.
S & F Swivel shower of PTMT any colour for fixing with 15mm pipe (minimum weight 40 gms) complete all as specified and as directed.
S F as in repairs soap dish , any type fixed to plugs with chromium plated brass screws, complete all as specified and as directed.
S & F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement. complete all as specified and as directed.
S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms) , complete all as specified and as directed.
S & F Grating doom 125mm dia of PTMT (Minimum weight 40gms), complete all as specified and as directed.
S & F 125/110 dia bore PVC (SWR) 'P' trap, complete all as specified and as directed.
S & F 125/110 dia bore PVC (SWR) 'S' trap, complete all as specified and as directed.
M & L for preparation of new plaster surface of wall and applying two coats of oil bound distemper over on coats of primer. complete all as specified and as directed.
M & L for preparation of new plaster surface of wall and applying two coats of cement based paint over on coats of primer. complete all as specified and as directed.
Rameshwar Prasad
M/S RAHUL TRADING CO.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .