Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC AKULA STREET BHAPUR BAZAR BERHAMPUR DISTT GANJAM ODISHA 760001 | GANJAM | ODISHA | 760001 | L1 | Accepted-AOC Accepted being L1 bidder | |
| 2 | L2₹10.4 L+₹84,760 (8.89%)Rejected-Finance | L2 | Rejected-Finance Being L2 bidder | |
| 3 | L3₹12.3 L+₹2.8 L (29.3%)Rejected-Finance | L3 | Rejected-Finance Being L3 bidder | |
| 4 | L4₹13.2 L+₹3.7 L (38.4%)Rejected-Finance | L4 | Rejected-Finance Being L4 bidder | |
| 5 | Rejected-Technical | - | Rejected-Technical Due to firm is enlisted as partnership concern whereas EPFO certificate is issued for proprietorship concern ie mismatch of constitution in enlistment and EPFO certificate also GST certificate not found uploaded |
Tender Value
₹7.8 L
EMD Value
₹15,560
Closing Date
7 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Avinash Mishra IDSE EE
Garrison Engineer (I) (CG) Bhubaneswar, Plot No 190/702, Kokila Residency, 2nd Floor, Anant Vihar, Post-Pokhariput, Bhubaneswar- 751020
PROVISION OF CERTAIN MINOR WORKS
2023_MES_621360_1
8426/BBSR/05/E8
Open Tender
Miscellaneous Works
Item Rate
120 days
Gopalpur
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE (I) (CG) Bhubaneswar
₹15,560
Yes
9 Mar 2024
3 Oct 2023
14 Nov 2023
3 Oct 2023
7 Nov 2023
24 Oct 2023
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in soft/loose Soil complete all as specified and directed.
M&L for Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required area exc 400 sq. cm but n exc 0.10sq.m complete all as specified and directed.
M&L for plain cement concrete 1:3:6(Nominal mix) using 40 mm graded stone aggregate as in foundation etc complete all as specified and directed.
M & L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencingincluding cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire meshetc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S& F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat rolled mild steel sections) including distance pieces, cleats etc complete all as specified and directed.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for Two Coats of Synthetic Enamel Paint over one coat of Red Oxide primer on New Steel Surfaces , over 10cm in width or girth,not otherwise described complete all as specified and directed.
Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.
Fixing only chain link fencing including 10 mm dia MS line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.
S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.
M&L for Bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 (including 10 mm dia round bar and 25X3mm flat iron) complete all as specified and directed.
M&L for Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long ® and dia of neck 5 to 10 mm bolt complete all as specified and directed.
S &F GI concertina coil with blade profile BTO-10 & 12 as in fencing fixed at 3m height of wall on angle iron Y shape and horizontal barbed wire including necessary GI fixing clips for securing complete with following specifications : (i) Dia of coil (Unstreched -600 mm), (ii) No of circle 50 turns per coil, (iii) Weight of each coil with hessian pack 8.5 kg, (iv) Coverage per coil max 6m, (v) Central core wire : made from 2.5 mm dia GI wire, (vi) Razor punched strip : Razor punched tape is CONSECZAL GI comprising of steel base with zinc alloy coating 250 GSM complete all as specified and directed. Note : Angle iron and barbed wire will be measured and paid separately as S&F under respective item of this schedule.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/Dense Soil complete all as specified and directed.
M&L for Hardcore of broken stone guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.
M&L for 100 mm thick Cement concrete type C- 2,1:3:6 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid over and including 50 mm thick sand cushioning complete all as specified and directed.
Providing Cement ConcreteType B0 1:2:4 (using 12.5mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.
Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for powder coated aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat, glazing clip for fixing etc complete all as specified and directed.
S&F 4mm thick (0.50 mm AL + 3.0 mm LDPE + 0.5mm AL PVDf coating) exterior quality aluminium composite panel (ACP) fixed in aluminium frame for door/partition including necessary rubber neoprene packing complete all as specified and directed. (Note : Aluminium frame work as in door/partition shall be measured and paid separately under item No-20 hereinbefore as supply & fixing only).
S&F 5.5 mm thick sheet glass, ordinary quality area exc 0.5 Sqm in each pane fixed in aluminium frame for door/partition including rubber neoprene packing complete all as specified and directed. Note : Aluminium frame work as in door/partition shall be measured and paid separately under item No-20 hereinbefore as S&F only.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S& F 150 mm long aluminium anodised door handle complete all as specified and directed.
M/S JAGANNATH SASMAL
M/s Ats Electricals
R K Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .