INSTALLATION OF NEW 33 KV VCB PANEL ETD IN BUSINESS PLAN UNDER EDD-V, BULANDSHAHR.

Amount

Carriage of fallowings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

PCC Pole 11 Mtr Long

PCC Pole 8.5 Mtr Long

Carriage of ACSR Weasal Conductor, AB Cable, LT XLPE Cable, 11 KV XLPE Cable, LT Cable, 11 KV Disc insulator with fitting, 11 KV pin insulator with pin, M.S. Channel-Angle, Stay Set Complete, 11 KV V-Type Cross arm, Earthing Rod Complete & Etc as per RESPO Norms.

11 KV VCB, I/C CTR 600/300/5A, 350MVA, 24 Volt

11 KV VCB For O/G CTR 200/100/5A, 350MVA

33 KV CT (Outdoor), 200/100/1-1-1 A

33 KV PT (Outdoor) (33 KV/110 V)

BUS ISOLALATOR 800A,33 KV

33 KV Lighting Arrester

Fuse Set 33 KV

The following meterial Erection & Fixing as per RESPO manual. It including the cost of labour, T&P, Carrier etc. required for proper completion of work.

Single support on PCC pole 8.5 Mtr. Long with all accessories.

Single support on PCC Pole 11 Mtr Long with all accessories

Making of D/P for T/F on PCC pole 8.5 Mtr. Long.

Grouting concreting & Plinthing of PCC Pole as per RESPO norms.

Fixing erection & grouting of Stay set complete with binding & Nozzling of Stay wire.

Earthing of supports with the help of Earthing rod & GI wire/Earth wire.

Laying stringing & sagging of Weasal conductor in 3 phase

Laying stringing & sagging of 11 KV 3x185 sq mm XLPE Cable

Laying stringing & sagging of LT Cable 1x400 sq mm

Laying stringing & sagging of AB Cable (3X120+1X95+1X16) sq. mm

Fixing of Cable Jointing Kit I/D for 3x185 mm sq XLPE Cable

Fixing of Cable Jointing Kit O/D for 3x185 mm sq XLPE Cable

Installation of 11KV VCB, I/C CTR 600/300/5A, 350MVA, 24 Volt

Installation of 11KV VCB For O/G CTR 200/100/5A, 350MVA

Installation of 33 KC CT (Outdoor), 200/100/1-1-1 A

Installation of 33 KV PT (Outdoor) (33 KV/110 V)

Installation Fuse Set & Making of Structure

Installation of BUS ISOLALATOR 800A,33 KV

Installation of Fuse Set 33 KV

Installation 33 KV Lightning Arrester & Making Strucrute

Earthing (Nutral & Body) of Power Transformer water level

STAY SET COMPLETE WITH WIRE

Providing & Fixing of the following material by the Contractor as per UPPCL/RESPO Rules.

MS Channel (Dropper) 100x50x2028

MS Angle 75x75x6x2028 mm

M.S. Top Channel (125x65x2240 mm)

MS T-off Channel 125x65x1300 mm

F-Clamp

11 KV Cross Arm Holding Clamp

Nut & Bolt with Washers all sizes.

Danger Board with Clamp

Stone Pad

Clamp for D/P with Nut & Bolt

DEAD END CLAMPS WITH I-HOOK (INSULATED)

LT PIERCING CONNECTOR

SUSPENSION CLAMPS WITH I-HOOK (INSULATED)

The fallowings matarial dismantalling & Carriage from site to ESC BSR including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

ACSR Weasal Conductor (Scrap) -

11 KV VCB (Old & Damage/Scrap)

1. Nut, Bolt, Clamps and others necessary items should be provided by contractor. 2. T and P should be and other necessary machinery should be provided by contractor. 3. All the MS Items must be Galvanized. All work will be done as per UPPCL/RESPO Rules and these work will be inspected by TPIA or any departmental authority.

Vivek Electricals