PROVN OF WORKING SHED IN THE ENTIRE WORKING AREA OF MT SECTION AND PROVISION OF SLUICE ROOM (DIRTY UTILITY ROOM) AT OTCHAF BANGALORE

Amount

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M&L Cement concrete 1:4:8 Type D2 in foundations, filling and mass concrete in foundation complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 including one shop coat of primer complete all as specified and directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick in curved surface of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L two coats of synthetic enamel paint over a coat of red oxide primer on Surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of surfaces complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 in sub base of floors complete all as specified and directed.

M&L 100 mm thick cement concrete 1:2:4 type B2 (40 mm graded aggregates) as in floor finishing even and smooth without using extra cement complete all as specified and directed.

S&F Aluminium dividing strips,1.50 mm thick 38 mm inserted in position,conform to design complete all as specified and directed.

S&F Provision of stainless steel letters fixed with screws 150 mm size complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc, n exc 10 sqm on plan and n exc 1.5m in depth and getting out in hard soil complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick with soil / loose soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed..

Formwork to sides to concrete foundations, footings, base of columns, raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surfaces of concrete etc complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, colums and stanchions fair finished fair finished surfaces of concrete etc all as specified and directed.

M&L RCC M-15 Nominal mix with using 20mm stone agg as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns etc; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L RCC M-15 Nominal mix with using 20mm stone agg as in columns, pillars, piers, posts and struts etc all as specified and directed

M&L Mild steel TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping of columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Item no 20.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.

M&L Framed work such as grills, gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates, icluding pintle hinges, stop, hand-made sliding bolts, etc similar work conforming to Fe.290 Gde-E 165,complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marbe dust with admisture of pigment to match with shade of granite including 15mm thick rendering in CM (1:4) as a backing coat,complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition, complete all as specified and directed.

Taking down chowkats or frames area not exceeding 1.50 Sqm (w/o taking off shutters from frames) and removing from site complete all as specified and directed.

Demolition of brickwork or stone/boulder masnory,laid dry below or above ground level and removing material from site complete all as specified and directed.

S&F Steel work in tublar truss including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st 240 etc confirming to fe-410-W (Gde-E-250) quality-A and also incl fixing arrangements with dash fastners screws wherever reqd complete all as specified as directed.

M&L Plain cement concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation filling and mass concrete for making base to the vertical members on roof etc. including necessary use and waste of formwork etc complete all as specified.

S&F MS Roof trusses (framed), trussed, purlins, crane ganties, rails and fastenings and heavy bracket framing (beam, tee angle, channel or flat sections as in wind ties etc.) including distance pieces, cleats etc. confirming to fe-410-W (Gde-E-250) quality-A all as specified as directed.

S&F Mild steel plain plates in available sizes (any thickness) confirming to Fe 410-W (Gde-E-250) quality-A as in base support to vertical members and support to horizontal members fixed to wall incl necessary welding etc complete all as specified as directed.

M&L Two coats of synthetic enamel paint on new steel surfaces over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth,complete all as specified as directed.

S&F Pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet 0.50 mm thick of any colour having 550 Mpa tensile strength as in roof covering/cladding and fixed with self tapping screws,complete all as specified as directed.

Providing & fixing internal wall panels on Light Gauge Steel Frame work with 12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on 8mm thick fiber cement board conforming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling/tapping screws/fasteners @ 60cm C/C of approved make, Screws shall be counter sunk rib head of 1.60mm to 4mm thick of 8 to 10 gauge of length varying from 25mm to 45mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish complete all as specified as directed. Note: (Cost of frame work to be paid for separately under relevant item).

M&L filling the groove (i.e. 2-3 mm gap between boards), taping and gypsum plaster boards with epoxy based sealing compound, acrylic based sealing compound, non woven reinforcement tape complete all as specified as directed. Notes: Use a flexible knife so that no air bubble is extrapped. Allow 1-2 hours gap.Once hard tacky or set, apply a coat of acrylic based sealing compound paste to flash fill the beveled area.After 2-4 hours go on to repeat a skin coat with acrylic based sealing compound to securely embed the 40mm width non woven reinforcement tape. Use only flexible steel knife, such as provided with packs, to avoid air entrapment within compound.After overnight drying shrinkage apply a coat of acylic based sealing compound to compensate shrinkage. Finally cover the bevel portion with any suitable overall skin coat with a desired full surface-level material.

M&L Anodised aluminium snap grid (Size of grid 605 * 605mm) frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all, complete all as specified and as directed.

M&L for 12mm thick Perforated particle board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with screws or with staples on snap grid, complete all as specified and as directed.

M&L Two coats of distemper oil emulsion including preparation of new perforated particle boards surfaces of ceiling and wall panelling, complete all as specified.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,C.P brass/ stainless steel screws, all complete as per architectural drawings complete all as specified as directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L 12mm thick prelaminated (both sides with decorative choice) particle board, interior grade, fixed with screws or securing with beading for aluminium partition wk etc, complete all as specified and as directed.

M&L 5.5mm thick plain sheet glass, ordinary quality and glazing rubber beading in square exc 0.5 sqm in each pane complete all as specified as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, ISI marked complete all as specified as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) of capacity exc 2000 but not exc 5000 Ltr, all as specified in SSR Part I complete all as specified as directed.

M&L 25mm thick PCC type B-1, 1:2:4 (using 20mm graded aggregate) as in sub base, complete all as specified as directed.

M&L White Marble tiles 30cm x 20cm x 20mm thick (Makrana Doogri Adanga marble), machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing etc. including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L White Marble tiles 30cm x 20cm x 20mm thick (Makrana Doogri Adanga marble), machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing etc. as in skirting/dado, including 10mm thick cement plaster in CM 1:4 as backing coat on fair faces on stone surface all as specified and directed.

M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, Type C-1 (1:3:6) complete built in CM 1:6, complete all as specified and as directed.

M&L Coloured Glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface all as specified and directed.

M&L Granite work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter basins, urinal partitions etc. and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed.

S&F Vitreous China WHB white oval type counter below type of size 570 x 445 mm including waste coupling, waste pipe and brackets etc. complete all as specified and directed.

S&F 15mm bore pillar tap, fancy type, chromium plated cast copper alloy with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks , complete all as specified and directed.

S&F Bib tap screwed down high pressure, cast copper alloy,fancy type, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed.

S&F Angle cock 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified. (Note : Weight of cock shall not be less than 0.575kg)

S&F Glass shelf assembly consisting of made out of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F CP brass Soap Dish Holder, complete all as specified and as directed.

Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store provision for branch connection by inserting tee union elbow etc complete all as specified and directed.

All as item No 57.00 here-in-before but 20mm bore, complete all as specified.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor complete all as specified and directed.

Refixing old steel tubing of 15mm bore and connections in new or old position (Walls, ceiling, floors, etc complete all as specified and directed.

M&L Steel Tubes 20mm bore, 'medium grade', galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and as directed..

Refixing old steel tubing of 20mm bore and connections in new or old position (Walls, ceiling, floors complete all as specified and directed.

S&F in repair PVC connections 45cm long including 15mm bore PTMT nuts on both ends complete all as specified and directed.

S&F repairs PVC (SWR) floor trap 75/110mm dia, with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed .

S&F in repairs 18/19mm thick block board ,grade 2 quality interior grade , commercial type fixed with screw to timber frame work complete all as specified and directed.

S&F Decorative laminate type 1 of 0.9 mm thick surface finish, colour and pattern as approved, fixed with approved adhesive as manufacturer's complete all as specified and directed.

S&F Continious piano hinges, continuous type of mild steel bright finish or electro galvanized with width of flap (when open) 30mm complete all as specified and directed.

S&F 75mm long Brass handle, cast type, polished bright fixed with nut and screws to cupboard shutter complete all as specified and directed.

S&F Magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, complete all as specified and directed.

M&L Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements on Stone walls / brick masonary walls /ceilings / floors etc including fixing top cover /PVC junction boxes fixing on Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light controlled by one single pole 5 Amps switch complete all as specified and directed.

One Wall mounted fan point controlled by one single pole 5 Amps switch complete all as specified and directed.

One Exhaust fan point controlled by one single pole 5 Amps switch complete all as specified and directed.

One 3 pin switch socket out let point 5 Amps switch on independent board complete all as specified and directed.

One 3 pin switch socket out let point 5 Amps switch on same board complete all as specified and directed.

One bell Point controlled by one push button 5 Amps switch on independent board complete all as specified and directed.

M&L Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.50 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements on Stone walls / brick masonary walls /ceilings / floors etc on stone/ brick machinery, including fixing top cover /PVC Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 2.50 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed. Note:- (i) Wiring to be done as per approved colour code in IE rule. (ii) Rate includes chase cutting for concealed wiring.

S&F Modular switch , 1 Module single pole one way 10 Amps complete all as specified and directed.

S&F Modular switch , 1 Module single pole one way 16 Amps complete all as specified and directed.

S&F Modular socket , 2 Module 6 Amps, 2/3 pin, 240 volts Ac 2/3 pin combined complete all as specified and directed.

S&F Modular socket , 2 Module 6/16 Amps, 2/3 pin, 240 volts Ac 2/3 pin combined complete all as specified and directed.

S&F Modular type Bell push 6 A, 1 Module complete all as specified and directed.

S&F Ding Dong Bell, AC, 230 volts, Single Pole complete all as specified and directed.

S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as complete all as specified and directed.

S&F Office LED Luminaires type 36 watts, LED 600 x 600 mm Recessed type fixed in grid ceiling incl connecting up with PVC sheathed 1.5 sqmm 2 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S&F Metal body Exhaust fans AC single phase 230 V of size 380 mm sweep , 900 RPM, with louvers complete all as specified and directed.

S&F Wall mounted fan, 400 MM sweep, 2050 RPM, Air delivery 90 CMM, with complete acessories complete all as specified and directed. Make : BAJAJ, Model No. NEO SPECTRUM, CAT NO : 250890 or equivalent in HAVELLS /WIPRO/ POLYCAB /CG / PHILPS

S&F sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements fixed on stone wall, floor or ceiling / brick masonary inc 2.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

S&F sub main wiring with two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 6.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements on stone wall, floor or ceiling / brick masonary inc 6.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

S&F sub main wiring with Four single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixed on stone wall, floor or ceiling / brick masonry in 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and Four runs of copper conductor together taken as one length for measuring unit length.

M&L Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground ( earth pit not less than 2.25mtrs deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level, connected to galvanised earth lead wire 4.00 mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

S&F Earth Continuity Conductor or main earthing lead fixed to wall on batten or recess or chasis or buried in ground or drawn in conduit / pipe or fixed for earthing etc. of size 4.00 mm dia galvanised iron or steel wire complete all as specified and directed.

S&F Sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, including taking down old unsv from existing place complete all as specified and directed.

S&F Sheet metal enclosure for DB's double door TPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V ncluding taking down old unsv from existing place complete all as specified and directed.

S&F MCB TPN, 63 Amps, 415 V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F MCB SPN, 6 to 40 Amps, 240/415 V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps, 240V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F LED 36 Watts building security lights made up of pressure die cast nousing with tougened glass and high power LED's with secondary optics and IP65 protection.(Optional 10KV SPD), efficiency greater than or equal to 110 LPWcomplete all as specified and directed. Make : CG, Model : FREEDOM NEO, CAT NO : LSTS-36 CDL-M or techno-commercially equivalent to PHILLIPS,HAVELLS , Bajaj & WIPRO

S&F Surge protection device Type TP+N, AC Triple pole and neutral, 20kA complete all as specified and directed.

S&F Modular white cover plate with frame, 1 module complete all as specified and directed.

S&F Modular white cover plate with frame, 2 module complete all as specified and directed.

S&F Modular white cover plate with frame, 3 module complete all as specified and directed.

S&F Modular white cover plate with frame, 4 module complete all as specified and directed.

S&F Modular white cover plate with frame, 6 module complete all as specified and directed.

S&F Metal flush box 1/2 module complete all as specified and directed.

S&F Metal flush box 3 module complete all as specified and directed.

S&F Metal flush box 4 module complete all as specified and directed.

S&F Metal flush box 6 module complete all as specified and directed.

M&L shifting of AC, Split AC of any capacity including removal of stabliser, indoor/outdoor unit for shifting from existing position to new location as per user requirement , installing, topping up of gas, including form work for mounting of out door unit as required at site, replacement of copper tubing connecting up commissioning & testing etc. complete all as specified & directed. Note : Topping up of gas and copper tubing will be paid seperately against respective items as supply only.

Supply only copper tube 15 mm dia/ 18 mm dia superior quality suitable for refrigeration and suction lines of split AC, drawn through pipes/ fixed to walls/ laid on floor or roof etc complete all as specified & directed.

Supply only copper tube 9 mm dia superior quality suitable for refrigeration and suction lines of split AC, drawn through pipes/ fixed to walls/ laid on floor or roof etc complete all as specified & directed.

Supply only Refrigerant gas ( R - 32 ) suitable for cooling equipments for filling/ top up etc complete all as specified & directed.

Supply and laying of GI pipes Medium grade 25 mm dia including fittings & fixtures complete all as specified & directed.

S&F in replacement of Gun metal gate valve, heavy duty, screwed both ends with iron wheel head suitable for following sizes of 50 mm bore GI water tubing including provision of necessary unions, nipple, collar etc. and taking down existing un-serviceable gun metal gate valve alongwith GI unions, nipple and collar including cutting the old threaded portion of GI pipe and making new threading in position complete all as specified & directed.

S&F LED Light fitting, 22 Watts, 220 volts, with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified & directed.

PRACHANIVA CONSTRUCTIONS (BID ID -3098189)

Sri Vijalakshmi Constructions (BID ID -3094251)