Comprehensive development works like Providing Open Gym Equipments (Titan Series) with flooring at Sankey Lake Sadashivanagara Gate Side Providing access Ladder to Vivekananda Statue at 18th cross Ground and Dr Rajkumar statue at Gokak Chaluvali park Other Civil Allied works in Ward No50 Sadashivanagara

Comprehensive development works like Providing Open Gym Equipments (Titan Series) with flooring at Sankey Lake Sadashivanagara Gate Side Providing access Ladder to Vivekananda Statue at 18th cross Ground and Dr Rajkumar statue at Gokak Chaluvali park Other Civil Allied works in Ward No50 Sadashivanagara

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

Terralux Polymatrix Pro complete as per specifications and as per directions of Engineer-in-charge.

Bench Press Machine complete as per specifications and as per directions of Engineer-in-charge.

Seated Pedal Trainer Machine complete as per specifications and as per directions of Engineer-in-charge.

Leg Squat Machine complete as per specifications and as per directions of Engineer-in-charge.

Low Lift Machine complete as per specifications and as per directions of Engineer-in-charge.

Back Pull Down Machine complete as per specifications and as per directions of Engineer-in-charge.

Chest Press Machine complete as per specifications and as per directions of Engineer-in-charge.

Upright Bike complete as per specifications and as per directions of Engineer-in-charge.

Power Sitting Hand Bike complete as per specifications and as per directions of Engineer-in-charge.

Recline Bike complete as per specifications and as per directions of Engineer-in-charge.

Power Standing Hand Bike complete as per specifications and as per directions of Engineer-in-charge.

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top width 114mm and 165mm respectively, 400mm high and 450mm Length with CM 1:3 plastering and finishing cutting, ...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 6 Sqmm, ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Arm Wheel Handle complete as per specifications and as per directions of Engineer-in-charge.

Bicycle Bearing 6205 complete as per specifications and as per directions of Engineer-in-charge.

Mini Ski Bearing No 6007 complete as per specifications and as per directions of Engineer-in-charge.

Mini Ski Foot Rests complete as per specifications and as per directions of Engineer-in-charge.

Arm & Pedal Shaft complete as per specifications and as per directions of Engineer-in-charge.

Arm & Pedal, Pedals complete as per specifications and as per directions of Engineer-in-charge.

Big Shoulder Bearing complete as per specifications and as per directions of Engineer-in-charge.

Nut Bolt Cap Plastic complete as per specifications and as per directions of Engineer-in-charge.

Oil Seal - Extra Large Size complete as per specifications and as per directions of Engineer-in-charge.

Shaft - Large Size complete as per specifications and as per directions of Engineer-in-charge.

Welding complete as per specifications and as per directions of Engineer-in-charge.