REPAIR TO ROOF TREATMENT FLOORING, JOINERY SANITARY FITTING AND ALLIED E/M WORK AT JANGLOTE UNDER GE BASOLI

Amount

Material and labour for Rendering 15mm thick in cement mortar 1:6 and finished even and smooth without using extra cement and preparation of new plastered surfaces and applying one coat primer and two coats of distemper oil emulsion and 3mm thick wall putty including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement and preparation of new plastered surfaces and applying two coats of cement base paint on walls over a coat of primer including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Glazed ceramic tiles 450X350X7mm thick in vertical surface , set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar 1:4 on fair faces of brick / concrete surfaces finished even and fair for receiving tiles incl taking down cement plaster any description complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 for laying tiles including roughening of old concrete surface etc and washing down with water to remove dust and applying neat cement slurry @3kg/Sqm Complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 for laying tiles including roughening of old concrete surface etc and washing down with water to remove dust and applying neat cement slurry @3kg/Sqm Complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed .

Supply and fix for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed .

Supply and fix for Factory made solid PVC moulded door shutters with wood free EPS 28 to 30 mm thick (style) eith 2,4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face and 2mm prelam PVC sheet on back face supplying & fixing at site as per specification & drawing complete all as specified and directed.

Supply and fixing for 35 mm thick Factory made 2nd class hard wood door Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.divided in square with sash bars The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.20 (a) complete all as specified and directed.

Supply and fixing for 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified.

Supply and fix for pressed steel frames for doors of size 105 x 60 mm, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , including one shop coat of red oxide, zinc chrome primer complete all as specified and directed

Supply and fix for pressed steel frames for doors of size 125 x 60 mm, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , including one shop coat of red oxide, zinc chrome primer complete all as specified and directed

Material and labour for providing cement concrete type C-1 1:3:6 using 20mm graded stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

Material and labour for Steel window/ventilator factory made double shutter and tubular moulded frame box type of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and applying two coats synthetic enamel paint, over one shop coat of red oxide, zinc chrome primer complete all as specified and directed.

Supply and fix for Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fix for Sheet glass 4.00 mm thick frosted glass and glazing with oil putty in squares n exc 0.5 sqm in each pane. complete all as specified and directed.

Supply and fixing for Mild steel galvanised wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

Supply and fix for 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fix for mild steel cold rolled butt hinges medium weight 75 mm long complete all as specified and directed.

Supply and fix for Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed,complete all as specified and directed.

Supply and fix for Extruded aluminium alloy handles fabricated type anodised and fixed, 125 mm size complete, all as specified and directed.

Supply and fix for Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt,complete all as specified and directed.

Material and labour for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Material and labour for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified.

Material and labour for Preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for Preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Supply and fixing in repair for 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle and connection to pipe complete all as specified and directed.

Supply and fix in repair for Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm white , with integral foot rests, including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified.

Supply and fix in repair 15 mm dia bore Bib taps ,fancy type cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified. complete all as specified and directed.

Supply and fix in repair for 15mm dia bore Stop valve fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix in repair for 15mm dia bore Stop valve long shank concealed type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix for steel water tubing galvanised, 15mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

Supply and fix for steel water tubing galvenised, 20 mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed.

Material and labour for roof treatment with the following specification - (a) Removal of existing old treatment of any type and roughening surfacesof old concrete of picking sweeping and washing down with water (b) applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.2 kg per sqm on primed surfaces. (c) Applying a layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.6 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with mineral gravel finish. The overlap shall be minimum 150mm on transverse direction and 100 mm on longitudinal direction and sealing overlap by torch application over and including plain cement concrete type B-0 1:2:4 (using 12.5 mm graded stone agg) of uniform thickness 50mm , top surface of plain concrete padding shall be finished even & smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge .

Supply and fix in repair for Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union,complete all as specified and directed.

Supply and fix in repair for vitreous china wash hand basin white angle back of size 400x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed.

Supply and fix in repairs15 mm bore dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fix Gun metal gate valve for 20 mmm bore of pipe with iron wheel head, screwed both ends complete all as specified and directed.

Supply and fix for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fix for Decorative curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed.

Supply and fix 100 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or floor complete all as specified and directed.

Supply and fix in repair 100 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints fixed in wall including two coats of black Japan Paint complete all as specified and directed.

Supply and fix 75 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or floor complete all as specified and directed.

Supply and fix in repair 75 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints fixed in wall including two coats of black Japan Paint complete all as specified and directed.

Supply and fix 100 mm dia Bends (any radius) with duck's foot or heel rest complete all as specified and directed.

Supply and fix 75 mm dia Bends (any radius) with duck's foot or heel rest complete all as specified and directed.

Supply and fix cast iron trap 'P' or 'S' 100 mm complete all as specified and directed..

Supply and fix Cast iron branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100mm dia fitted with oval and access door complete all as specified and directed..

Supply and fix cast iron cowl for 75mm dia pipe complete all as specified and directed..

Supply and fix cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)complete all as specified and directed..

Supply and fix sinks made of stainless steel 1mm thick overall size 495mmx420mm bowl size 410mm x 330mm x160mm for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar connecting union to pipe, GI waste Pipe 32mm from sink to nahani trap of approved brand including cost of materials, adhesive solution, including coupling and with a pair of suitable C.I. brackets including painting the brackets with two coats of approved paint cutting holes in walls and making good the same etc. complete all as specified and directed.

Supply and fix in repair CP Wall Mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.Make: Jainko cat part No WCT-4 or Jaquar cat part No QQT-7219 or cera cat part No CQ-911.

Supply and fix fancy type Brass chromium plated soap dish complete all as specified and directed.Make: Jainko cat part No SDJ-1 or Jaquar cat part No AQN-7731 or cera cat part No CA-206.

Supply and fix Three tier glass shelf assembly with brass frame of chrome mat finish with all accessories complete all as specified and directed.Make: Jainko cat part No CSJ-3 or Jaquar cat part No ACN-1173 or cera cat part No CA-502

Supply and fix PVC shelves of PTMT fixed with and including chromium plated brass screws and plastic cleats. complete all as specified and directed.

Supply and fixTowel ring of PTMT fixed with and including chromium plated brass screws and plastic cleats. complete all as specified and directed.

Supply and fix Stainless steel kitchen plate rack.of size 600 x 600 x 225mm complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for Point wiring with 1.5 Sqmm (nominal area)copper conductor FRLS cable (Multi stranded) PVC insulated and unsheathed in and including concealed PVC rigid non metallic conduit (ISI marked) with sunk cast iron/pressed steel terminal boxes of suitable size with 3mm thick plastic laminated sheet for light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified. Note : (a) Unit rate include for cutting chases for conduit and sinking for boxes and making good to wall, floors etc. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

All as per item No 62 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per item No 62 but for one 3 pin 5 Amp socket outlet on same board complete all as specified and directed.

All as per srl item No 62 but one light point controlled by two way switch with cable 1.5 sqmm size complete all as per specified and directed.

Material and labour for Point wiring with 2.5 Sqmm copper conductor FRLS cable (Multi stranded ) PVC insulated and unsheathed cable conductor in and including concealed PVC rigid non metalic concealed conduit (ISI marked) of suitable size with metal flush boxes of adequate size with cover plate for one 3 pin socket outlet 15 amps on independent board incl continuous 2.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed cable earth wire connected to common earth dolly complete all as specified. Note : Unit rate for cutting chases for conduit and sinking of boxes and making good to wall,floor ceiling complete all as specified and directed by Engineer in charge. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

Material and labour for Point wiring with 1.5 Sqmm (nominal area)copper conductor FRLS cable (Multi stranded) PVC insulated and unsheathed in existing concealed conduit and sunk cast iron/pressed steel terminal boxes duly painted with a coat of red oxide primer and replacement of 3mm thick plastic laminated sheet of adequate size for light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified.

All as per item No 67 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per item No 67 but for one 3 pin 5 Amp socket outlet on same board complete all as specified and directed.

All as per srl item No 67 but one bell/buzzer point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size complete all as per specified and directed.

Material and labour for Point wiring with 2.5 Sqmm copper conductor FRLS cable (Multi stranded ) PVC insulated and unsheathed cable conductor in existing concealed conduit and sunk cast iron/pressed steel terminal boxes duly painted with a coat of red oxide primer and replacement of 3mm thick plastic laminated sheet of adequate size for one 3 pin socket outlet 15 amps on independent board incl continuous 2.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed cable earth wire connected to common earth dolly complete all as specified.

Supply and fix Switch piano, flush type single pole, one way 5 Amp complete all as per specified and directed.

Supply and fix Socket outlet , 5 pin, 5A complete complete all as per specified and directed.

Supply and fix in repair for socket outlet multipurpose 2 in 1, 6 pin, 5 and 15 Amp flush type complete all as per specified and directed.

Supply and fix Switch Bell push, flush type, 5 amp complete all as per specified and directed.

Supply and fix Switch piano, flush type single pole, one way 15 Amp complete all as per specified and directed.

Supply and fix modular type ceiling fan regulator electronic type - 2 modulesuitable for 230V SP 1200mm/1400mm sweeps confirming to IS complete all as specified and directed.

Supply and fix Modular Bell push 6A 1 module complete all as per specified and directed.

Supply and fix Modular switch 1 way 6A, 1 module complete all as per specified and directed.

Supply and fix Socket, 6A - 3/5 pin, 2 module complete all as per specified and directed.

Supply and fix socket 16A, 6 pin, 3 module complete all as per specified and directed.

Supply and fix modular switch 16A, one way, 1 module complete all as per specified and directed.

M&L for Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

Supply and fix ceiling rose surface bakelite 65x50mm, two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

Supply and fix for Metal flush box 1/2 module for modular switch/socket complete all as per specified and directed.

Supply and fix for Metal flush box 3 module for modular switch/socket complete all as per specified and directed.

Supply and fix for Metal flush box 4 module for modular switch/socket complete all as per specified and directed.

Supply and fix for Metal flush box 5/6 module for modular switch/socket complete all as per specified and directed.

Supply and fix for Metal flush box 8 module for modular switch/socket complete all as per specified and directed.

Supply and fix for White cover plate with frame, 1/2 module complete all as per specified and directed.

Supply and fix for White cover plate with frame, 3 module complete all as per specified and directed.

Supply and fix for White cover plate with frame, 4 module complete all as per specified and directed.

Supply and fix for White cover plate with frame, 6 module complete all as per specified and directed.

Supply and fix for White cover plate with frame, 8 module complete all as per specified and directed..

Supply and fixing in replacement plug top 3 pin 5 amps AC 230 volts complete all as specified and directed.

All as per srl item No 95 here in before but 3 pin 15 Amps AC 230 volts complete all as specified and directed.

Supply and fix in repair for bell ding dong or fency type of 240 V complete all as per specified and directed.

Supply and fix in repair for MCB SP 5 to 32 Amps with 10 KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB SPN 32 to 63 amps with 10KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB SPN 32 to 40 Amp with 10KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB TPN 32 to 40 Amp with 10KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB TPN 63 Amp with 10KA breaking capacitycomplete all as per specified and directed.

Supply & fixing in replacement sheet metal powder coated VTPN DB double door 4 way with MCCB 100 Amp, 415 volt, 50 HZ AC 16KA 4 pole with copper bus bar rated 200 amps neutral link, earth bar and din rail complete all as specified and directed.

Supply & fixing in replacement sheet metal powder coated versatile double door TPN distribution board for MCB provision 415 Volts, 50 Hz AC supply 4 way fitted with copper bus bar rated 200 amps neutral link, earth bar and din rail complete all as specified and directed.

Supply & fixing in replacement sheet metal powder coated versatile double door SPN distribution board for MCB provision 230 Volts, 50 Hz AC supply 4 way fitted with copper bus bar rated 200 amps neutral link, earth bar and din rail complete all as specified and directed.

Material and labour for replacement of existing sub main wiring with two run of single core FRLS PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.00 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run FRLS PVC insulated single core copper conductor cable 4.00 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core FRLS PVC insulated copper conductor cable one run of 4.00 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe with funnel with wire mesh at top, 15 mm bore light grade earth lead protection pipe upto main board with RCC cover suitable handle and angle iron frame for pit top and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include the cost of earthing wire and protection upto 7.5 metre length.)

Supply and fix in replacement LED tube light fitting 1 x 16 watt, 230v including tube rod with polycarbonate diffuser , of 4 feet ,complete with all accessories and pre-wired incl all necessary electric connection with three core copper cable 23/0.0076 complete all as specified and directed.

Supply and fix in replacement LED tube light fitting 1 x 20 watt, 230v including tube rod with polycarbonate diffuser , of 4 feet ,complete with all accessories and pre-wired incl all necessary electric connection with three core copper cable 23/0.0076 complete all as specified and directed.

Supply and fix in replacement LED tube light fitting 1 x 8 watt, 230V including tube rod with polycarbonate diffuser, of 2 feet complete with all accessories and pre-wired incl all necessary electric connection with three core cooper cable 23 /0.0076 complete all as specified and directed.

BALKRISHAN GUPTA AND SONS

M/S S KUMAR & CO

Ms Dalip Kumar and Co.

M/S SINGHAL ENGINEERS

Neeraj Enterprises

Standard engineers