CERTAIN SANCTIONED LBW AND MINOR WORK OF E/M NATURE AT DAMANA UNDER GE JAMMU

Amount

B/R Portion: - Material and labour for soakage wells exceeding in ordinary soil, foundation in PCC (1:3:6), wells of Honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in cement mortar, RCC cover slab in M-25 / RR Masonry / filling with brick bats, complete of size 2.4 M dia X 3.0 M deep as shown in drawing No CEPZ-C-TD-13/01-05 complete all as specified and as directed.

Material and labour for construction of septic tank for 100 users, exceeding in ordinary soil, foundation in PCC (1:2:4), brick work in cement mortar (1:4), RCC slab covers including RCC precast manhole covers having 6mm plate embedded all round / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc complete all as specified and shown in drawing No CEPZ-C-TD-13/01-05 and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and as directed.

Demolition by breaking up drain pipes (salt glazed stoneware or AC / RCC) 150mm dia jointed in cement mortar and taking out of trenches and removing the debris including concrete bed and haunching from the trenches complete all as specified and as directed.

Material and labour for 200mm bore / inner dia Double wall corrugated HDPE pipes (SN-4) with integral socket and necessary fittings, laid in trenches jointed as per manufacturer instruction complete all as specified and as directed at site.

Demolition of brick work built in cement mortar including all quoins, pillars, arches etc including PCC benching / coping etc complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified and as directed.

Description all as per Ser Item No 9.00 here-in-before but except bricks complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in benching, coping etc including necessary formwork complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement including mixing of integral water proofing compound in the proportion as per manufacturer's instructions complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed.

Material and labour for precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slab fixed in position including necessary formwork and set in cement mortar (1:6) complete all as specified and as directed.

Material and labour for mild steel TMT 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for TMT bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drain 200mm dia making good to pipe and rendering cutting out existing for and forming branch channel (½ round or 3/4 round section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required complete all as specified and as directed.

E/M Portion: - Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed.

Material and labour for fixing of 4 No's rawl plug of suitable size (4"-6") nuts and bolts for hanging of geysers on wall complete all as specified and as directed.

Material and labour for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 4.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through rigid PVC conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed.

Supply and fixing industrial plug, MCB distribution board 3 pin with earth plug CRCA body with MCB 32 Amp complete all as specified and as directed.

Material and labour for tubing galvanised iron "medium grade" with all fittings laid in floor / wall or trenches of size 15 mm dia complete all as specified and as directed.

Supply and fixing stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, fancy type, screwed both ends for iron pipe or for unions and fixed for 15 mm dia of pipe complete all as specified and as directed.

Supply and fixing PVC connection of size 15 mm dia with PTMT nuts of length 600 mm long (hot series braided, threaded and cold series) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing bib tap cast copper alloy (chromium plated) with crutch or butterfly handle screwed down, chromium plated for iron pipe for brass ferrule of size 15 mm bore complete all as specified and as directed.

Material and labour for cutting to existing galvanised iron pipe of size 25/20/15 mm dia in position for addition / alteration or insertion of TEE for branch connection complete with cutting, threading and jointing / fixing including galvanised iron fitting as per site requirement complete all as specified and as directed.

Supply and installed refrigerators, electric driven (single phase) of capacity 195 litres frost free BEE 5 star rated complete all as specified and as directed.

Supply, installation and commissioning of water cooler partially stainless steel electric driven single phase having approximate storage and nominal cooling capacity 40 / 80 litre complete all as specified and as directed.

Supply and fixing voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of + 2.5% and of capacity 1 KVA (for water cooler, refrigerator and deep freezer) complete all as specified and as directed.

Supply and installed Deep freezers, electric driven (single phase) glass top upto 200 litre capacity having single door, BEE 5 star rated complete all as specified and as directed.

Material and labour for point wiring for socket outlet 15 Amps independent board controlled by one 15 Amp switch with 4.0 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 4.0 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into casing and capping ISI marked including terminal boxes for mounting switches, sockets etc complete all as specified and as directed for the following: - Notes: - (a) Suitable sheets with frame as specified to be provided and measured and paid separately as per relevant items. (b) Wiring shall be done by using proper colour coding. (c) Earth wire shall be of green colour.

Supply and fixing switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed.

Material and labour for wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed as required size 4 Sqmm X 3 lines complete all as specified and as directed.

Supply and fixing desert cooler (steel body) AC, 230 Volts, 50 Hz, 1325 RPM having normal air flow capacity 4000 CuM per hour, fan motor 120 Watts three star copper winding 1/6 HP, submersible motor 18 watts complete all as specified and as directed. Note: - Above said rate is included with iron cooler stand of size (leg 50 X 50 X 5mm, support / bracing top and bottom 50 X 5mm, height upto 1.2 metre) of appropriate size as per requirement at site.

M/s Koul & Sons (BID ID -3121659)

Sarbat Construction Co (BID ID -3108821)

Nitika electricals and engineers works (BID ID -3120254)

DARVESH ENGINEERING WORKS (BID ID -3121297)

M/s Sahib Construction and engineers (BID ID -3121790)

M/S JIWAN SINGH (BID ID -3122198)

M/S TRIKUTA BUILDERS (BID ID -3122090)