WORK OF Issue of 90 KW new connection to Govt. ITI Marhara on Semi Turnkey basis in the area of EDD IInd Etah under deposit scheme.

Amount

Supply of 11 KV Line Material as per relevant ISS

F-Clamp

Barbed wire

N&B off size

Stone Pad 300x300x75

Clamp with N&B

Danger Board

PG Clamp

Number Plate

O/D Jointing Kit suitable for 3x70 sq mm XLPE Cable

I/D Jointing Kit suitable for 3x70 sq mm XLPE Cable

Aluminium Binding Wire

Dropper Chanel

Top Channel 125x65x2240 mm with Clamp

MS Angle 65x65x6x3800 mm

Earthing Complete

Guarding Angle

T off Channel with Clamp

11 KV Cross Arm Clamp

GI Pipe 6" Dia

Erection Work

Safe carriage of line material from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 30 Km. including loading and unloading at both side.

Safe carriage of 8.5 Mtr Long PCC pole from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 30 Km. including loading and unloading at both side.

Safe carriage of 11 Mtr Long ST pole from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 30 Km. including loading and unloading at both side.

Safe carriage of 11 KV VCB from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 30 Km. including loading and unloading at both side.

Safe Carriage of 250 KVA TF from Electricty store center Etah/nearest 33/11 KV S/S to direect Pit site in distance range 0 to 30 Kms. Including loading and unloading at both side.

Erection of 8.5 mtr long PCC Pole as single support including fixing of HT/LT accessories etc complete, pole should be gruted properly as per DVVNL/Respo norms.

Erection of 11 mtr ST Pole as single support including fixing of all HT/LT accessories etc. complet, pole should be grouted properly as per DVVNL/RESPO norms.

Erection of 11 mtr ST Pole as Try Pole including fixing of all HT/LT accessories etc. complet, pole should be grouted properly as per DVVNL/RESPO norms.

Construction of 250 KVA T/F plinth for size 2x2x1.5 M with the help of first class brick and masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely as per norms with RCC top 1:2:4 cement, sand coarse and stone grit with MS Bar and MS channel for resting transformer wheel (100x50x6mm) and plaster. All material shall be provided by the contractor.

Net Fencing Shall be 1150*1200 mm made of 35*35 mm MS Angle covered by expended metal 14 SWG up to full Height 1200 mm duly steftened by MS flat by an 8 SWG dia bolt & nut

Installation of 250 KVA T/F on newly constructed Plinth in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for completion of work

Pipe earthing up to water level of 250 KVA medium Power Transformers

Laying, sagging stringing, binding, jumpering & fixing of all accessories etc of following conductor on the newly/old erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work.

ACSR Rabbit Conductor

ACSR Dog Conductor

11 KV XLPE Cable 3x70 sq mm

Stone Pad 300x300x75

Danger Board with Clamp

PG Clamp

Number Plate

Installation of 11 KV VCB O/G

O/D Jointing Kit suitable for 3x70 sq mm XLPE Cable

I/D Jointing Kit suitable for 3x70 sq mm XLPE Cable

Earthing Complete

Stay Set Complete

GI Pipe 6" Dia

Grouting of main metering cubicle inside the meter room alongwith termination of 11 KV cable.

New Guarding of HT Line with GI wire as per RESPO norms

ABG ENGINEERS

M/s APOORWA ELECTRICALS