SPL REPAIR TO BLDG NO MOR198 OF 383 COY ASC SUP TYPE A PROVN OF RETAINING WALL NEAR BLDG NO MOR214 CIV MD ACCN PATHWAY FROM PARKING AREA TO BLDG NO P174 HRDC COVERED PATHWAY FROM BLDG NO P242 TO MAIN ROAD AT NEW MIL STN UNDER GE GANGTOK

Amount

Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm nut n.exc 4Sqm all as specified and as directed.

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets

Demolition of concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.

Demolition to cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of dismantled materials/rubbish from site complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as dierceted.

M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/hardstanding finished the concrete surfaces even and smooth without using extra cement etc complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

M & L for 20mm thick rendering in cement plaster in CM (1: 4) in two layer and top layer 10mm thick shall be mixed with WPC @ 3% by weight of cement on fair faces of stone masonry wall incl finish the surface even and fair without using extra cement complete all as directed and specified (WPC shall be measured and paid separatly)

Supply only Integral waterproofing compound .

M&L for 15 mm thick rendering plaster on fair faces of conc faces/ brick wall faces of smooth without extra cement in CM 1:6 complete all as specified and as directed .

M&L for for applying two coat of exterior acrylic emulsion weather proof paint overa coat of primer on new /old plasterd surface including preparation of new/old plasterd surface etc complete all as specified and directed.

M&L preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer .

M&L preparation of old or previously treated wooden surfaces of any description over 10 cm width or grith and applying one coat of synthetic enamel paint over wooden surface complete.

M&L for preparation of new plastered surfaces of walls applying two coats of distemper, oil emulsion, white or tinted over new wall suface on a coat wall care putty complete all as specified and directed.

M&L for preparation of old or previously treated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamal paint over old steel surface complete all as specified and directed.

S&F powder coated grid frame work for false ceiling comprising of the following sections for making partitions of 600 x 600m size fixed to walls with rawl plugs & screws and hanged to roof with and including 1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 28mm x 23mm x 0.3mm thick, cross tee shall be 24mm x 23mm x 0.3mm thick and wall angle shall be 20mm x 20mm x 0.3mm thick complete all as specified and as directed.

M&L 4 mm thick E-board for insulation and accoustic purposes, 595 x 595 mm in size,fixed with staple on snap gird as in ceiling with and including dusting of surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Hacking out old broken glass any thickness ,size ,quality or description from woodenl frames glazed with putty.

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints.

Dismantling timber scantlings 40 sq. cm and over in section, in any position all as spd and direvcted by Engr in Charge.

M & L for 2nd class hard wood timber scantling of any size or in any position such as truss,purlin etc and if in repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store

Supply and fix 2nd class Plain framed, panelled shutter (two panel) 35mm thick with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as spd and direvcted by Engr in Charge.

S&F 35mm thick 2nd class Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete

S&F 30mm thick 2nd class Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

Supply and fix Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw as in cup boards ,shelves etc all as dier cted by Engr In Charge.

S&F 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc all as dier cted by Engr In Charge.

S & Ms but hinges 100mm long complete

All as per item No 33 above but 75mm long complete

S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete

All as per item No 35 above but 100mm long complete

S&F 150mm long Aluminium handles, cast type, anodised complete.

All as per item No 37 above but 100mm long complete

S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane.

S&F as in repair stain less steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed.

Ditto all as item No 43 above but on vertical surface of wall like skerting/dadoi etc on 15mm thick rendering in cm 1:4 complete.

M&L fo Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, , in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed.

M&L for glazed coloured ( 450 x 300 mm/250 x 350mm) x 7 mm th as in skirting/dado over & including 10 mm th rendering in CM 1:4 set & jointed in neat cement sullry & pointed in white or coloured cement to match complete all as spfd & directed.

M&L for lacquer coated precast chequered cement concrete tiles floor of size 200x200x25mm/300x300x25mm thick set and jointed in grey cement pigment to match over 15mm thick scteed in CM (1:6) complete all as specified and directed

M & L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15mm thick screed in CM 1:6 etc complete all as spfd and directed.

M&L for RCC type B1 1:2:4 (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, cover slab, balconies, canopies, deck slabs and in shelves and the like complete all as specified & as directed.NOTE : Re-inforcement shall be measured and paid separately.

M&L mild steel bars 10 mm dia & over cut to length bent to shape required, including cracking, bending spirally to proper for columns, hooking end & binding with and inch mild steel wire not less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as spfd and directed

M&L for MS bars 5 mm dia and over upto and including 10 mm dia in stirrups cut to length, bent to shape required incl cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia quality conforming to TMT bars complete all as specified and directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as spfd and directed.

M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick etc complete all as spfd and directed.

Taking down 15mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as directed.

Taking down 20mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as directed.

S&F galvanised steel water tubing 15 mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed by the Engr-in-Charge.

S&F galvanised steel water tubing 20 mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed by the Engr-in-Charge.

S&F in repairs Water closet vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connecting to trap and flushing pipe anti syphon pipe etc provision of lime concrete bedding complete all as specified & directed.

S&F in repairs 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed.

S&F in repairs vitreous china, white colour, flat back, wash hand basin of size 55 x 40 x 79cm fixed with brackets , including providing 32 mm dia PVC waste pipe , 32 mm bore CP waste coupling and making all necessary connections complete as directed.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair 15 mm bore dia angular Stop cocks, cast copper, fancy type, chromium plated, with wall flange screwed down, screwed fro iron pipe or union and complete all as directed.

S&F in repair Bib tap , long body cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one.

S&F in repairs 15 mm pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as directed by the Engr-in-Charge. Make- Prayag Cat No 323 or equivalent make as specified.

Dismantling old PGI/CGI sheeting of any gauge thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete.

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screws complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (20 mm gradede aggregate ) as in coping, bed plates , parepet,plinth course including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.

M&L for pre cast cement concrete block masonry with solid blocks, exc. 10 cm in width and settting in cement mortar 1:6 type C1, (1:3:6) (using 20 mm graded stone aggregate) as per IS 383 complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out as in soft /loose soil complete all as specified and directed.

Material and labour for hardcore of gauge n.exc.63mm (using broken stone or boulders) deposited, spread and levelled in layers not exc.15cm thick, watered and rolled/rammed to a true surface complete all as directed.

M & L for Plain Cement concrete 100mm thick type B- 2, 1:2:4 (40mm graded aggregate) as in hard stand /path etc including finish the surface even and fair without using extra cement etc complete all as specified and directed.

Removing excavated soil to a dist n.exc.50m complete all as directed.

Disconnecting existing tanks, of capacity exc 500 Lt but n.exc 1000 Ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with storage capacity of 500 Ltr incl hoisted and fixed in position all as specified in SSR Part I

S&F Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete.

S&F decorative type curtain rod ,chromium plated 25mm dia with fixing btackets ,stops and complete fittings including making good the surface were damaged all as directed by Engr In charge.

Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil for foundation of Retaining wall complete all as specified and directed.

Excavation over areas n exc. 1.5m deep in soft/loose soil for foundation of retaining wall complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (40 mm gradede aggregate ) as in foundation and mass concrete complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C-2 as in retaining wall etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (20 mm gradede aggregate ) as in coping, bed plates including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.

M&L for RCC M25 design mix( 20 mm aggregate) in beam over 1.5 meter span complete all as specified and as directed.

M&L for Formwork to faces of walls,retaining wall etc; vertival or batter for rough finished surfaces. all as specified and as directed.

S&F PVC(SWR) 75mm dia pipes single socketed, in any length as in weep holes complete all as specified and directed.

S&F of geosynthetic material 75mm dia as in weep holes cover

Returning, filling in soil incl watering, well ramming, etc complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where dire.

M&L for Hand packing using Broken stone or boulders (any thickness) at back of block masonry retaining wall and raising or lowering to the required level complete all as specified.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) 15 mm bore, and fixed complete to walls/ceiling or laid in floors complete all as directed by the Engr-in-Charge.

M&L for 75 mm thicks 1: 3: 6 type C-2 (40mm graded aggregate) as in plinth protection finished the surfaces even and smooth without using extra cement complete all as specified and directed .

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes complete all as specified and directed.

M&L for Lacquer coated coloured chequered cement concrete tiles of size 200mm x200mm x 25 mm/ 300 x 300mm x 25mm thick as in pavement/footpath/trade/riser, set and jointed in neat cement slurry and pointed with grey cement and pigment laid over and including screed bed/bedding layer of 15mm thick in cement mortar (1:6) all as specified and as directed.

M&L for PCC (1:3:6), type C-1 (using 20mm graded stone aggregate) as in coping complete all as specified & as directed.

M&L for applying two coats of exterior acrylic emulsion painting over a coat of alkali resistant primer including scaffolding upto 15m ht and preperation of old/new surfaces all as directed

Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specifed and directed.

M&L for 100 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and incl use and waste of form work and finishing the surface even and rough to receive the topping layer or tiling complete all as specified and directed .

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F rolled section as in main and cross beams hip, jack rafters,hollow section purlins, where connected to common rafters and running rails and guides for sliddinng doors fixed with angle cleats or other connecting plates of grade Fe-410, complete all as specifed and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces of any description over 10 cm in width or girth incl preparation of new steel surfaces complete all as specifed and directed.

Taking down carefully the old unserviceable aluminium / copper point wiring (light, fan, socket or power etc.) complete including fixtures and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fittings etc. and removing materials for taking credit and making good disturbed surfaces of wall floor etc. all as specified and directed.

M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable of working voltage 1100 volts grade conforming to IS 694 Pt-I & II of 2020 drawn in and including 25mm size PVC rigid non metalic conduit accessories (ISI marked) concealed in wall/fixed to roof ceiling etc & accessories with 1.60mm thick pressed steel or mild steel sheet sunk box covered with 3mm thick bakelite sheet fixed with brass screws & cup washers including 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DBs or common earth dolly complete for light point / fan point / exhaust fan point / call bell point / controlled by one switch 5/6 Amp one way complete all as specified and directed. Note : Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No 106 here-in-before but one switch socket outlet point 5/6 Amps on same board.

All as per item No 106 here-in-before but one switch socket outlet 3 pin 5 amps independent board.

All as per Item No. 106.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 2.5 Sqmm multistranded copper conductor wire FRLS PVC insulated and 2.5 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge.

S&F switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-Charge. Make: Anchor Product Code No 50053 or equivalent of approved make.

S&F bell push, flush type, 6 amps, 240 volts ISI marked all as specified and as directed. Make Anchor Product Code No 50075 or equivalent of approved make.

S&F in repairs bell ding dong, AC single pole 220/240 volts white/ivory finish, surface type complete all as specified and directed. Make : Anchor Product Code No 8272 or equivalent of approved make.

S&F ceiling rose, PVC/Polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and directed. Make : Anchor Product Code No 39040 or equivalent of approved make.

S&F socket outlet 2 in 1, 3 pin 6A 230 volts, 50 Hz ISI marked complete all as specified and directed.

S&F Switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed. Make Anchor Product Code No 4056/50483 or equivalent of approved make

S&F Switch socket combination, 2 in 1, 6 pin, 5/6 amps and 15/16 Amps, multipurpose, flush, non shutter, non inter locking type 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed. Make Anchor Product Code No 38808/50665 or equivalent of approved make

Supply & fix lamp holder angular / straight insulated body, with back plate suitable for batten fittings, white / ivory finish complete all as specified and directed. Make - Anchor Product Code No 39527 or equivalent of approved make.

S&F LED light fitting 1 x 18 W (4FT), CRI>=80, CT >=5700K, wall/ surface mounted, integrated type, constructed of fire retardant engineering grade exturded plastic & decorative end caps with integrated high efficiency electronic dirver & surge suppressor of 2KV or more. luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangements complete including 01 No 18 W (4 FT) LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed. (Make : Havells Cat No REGALBATTEN8UPTO1X22WSSBSWH and tube light Cat No TITANIANEO1213T8SSTL18WLED865SPC or equivalent in CG/Bajaj)

Supply & fixing LED fitting 1 x 9 W / 1 x 10W bulk head luminaries LED light dirver holder connecting up with three core flexible copper conductor cable of suitable size complete all as directed.

Supply and fixing LED light fittings mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as directed.

S&F Exhaust Fan 250mm sweep, 1400 RPM, 240 Volt, AC 50 Hz, PVC body including lovers with including cutting bricks/stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement mortar complete all as specified and directed Make : Havells Ventil Air - DX White or equivalent of Almonard/CG/Bajaj)

S&F Exhaust Fan 300 mm Sweep, 240 Volt, AC 50 HZ Metal body, including lovers with and including cutting bricks/stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement mortar complete all as specified and directed (Make-Havells Ventil Air-DX White or equivalent of Almonard/CG/Bajaj)

Supply and laying DWC pipe SN-4 with coupler 40 mm OD, ISI marked along with all accessories like socket, bend couplers etc. Confirming to IS 14930. Part Il complete with fitting and cutting, jointing etc. Laid in trenches/ fixed to pole /laying under road crossing/fixed on pavement wall with clamps complete all as specified and as directed

Supply, laying, jointing and testing in trenches or passing through pipe, 1100 Volts grade XLPE insulated, armoured heavy duty electric cable with aluminium conductor of cross sectional area 6 Sqmm 2 core with necessary foxing arrangement such lugs, glands and terminal etc complete all as specified and as directed

Supply and laying 50 mm bore GI pipe light grade including fittings fixed to pole/laying under road crossing with clamps complete all as specified and as directed

Excavation in trenches n. exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation, etc or for shafts, wells, cesspits. manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft /loose complete all as specified and as directed

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in softloose soil complete all as specified and as directed.

Removing excavated material from the site to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1 5 metre above the starting point complete all as specified.

S&F Sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way with 200 Amps rated copper bus bar double door type complete all as specified and as directed. (Make Havells cat No DHDPSHODRW08 or equivalent in list of make)

S&F MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity. 'C' Curve complete all as directed by Engineer-in-charge. (Make Havells cat No DHMGCSNF040-063 or equivalent in list of make)

S&F MCB single pole 6 to 32 Amps, 240 volts, 10 KA rapturing capacity 'C' Curve complete all as directed by Engineer-in-Charge. Make : Havells cat No DHMGBSPF006-032 or equivalent in list of make)

S&F RCBO/RCCB for earth-leakage, overload & short-circuit protection, double pole 40A sensivity 300 mA, 10KA, ISI marked incl indication of fault protection complete.

Supply, install, testing & commissioning of electric water heater in repairs, storage vertical type, 5 star rated, 25 ltr capacity comprising of high wattage heating element for instant heating, extra thick inner tank of superior grade, rust & shock proof outer body, non-ferrous pressure plate with & incl provn of 04 Nos grouting bolts suitably flushed to wall or any other surface incl Hot & cold water pipe for geyser inlet and outlet connection & electric connection with 3 core PVC insulated, sheathed, standed copper conductor cable/flexible chord complete all as specified and as directed. Make-Havells Cat No-GHWAMGTWH025 or is equivalent in Crompton/Bajaj

M & L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, Gl earth wire will be protected by 15 mm dia Gl pipe 'light grade', watering pipe 20 mm dia GI 'Medium grade', Gl wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-1 1991 print and as directed.

KARMA SHERPA

M/S MANOJ VERMA

KAMLESH ENTERPRISE

RABI BANIK

DHARMINDER SINGH

NISHA CONSTRUCTIONS

BIJAY MITTAL

KARMA TSETEN BHUTIA