REPAIRS TO FOOT PATH, WALL, FENCING, GATE AND CERTAIN OTHER MISC WORKS AT KALIMPONG UNDER GE 867 EWS

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc.including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh any type and any descripition complete all as specified and as directed.

Excavating in post holes (or similar holes) in loose / soft soil each n.exc 0.50 cum, getting out, returnining, filling in ramming earth or broken rubble mixed with earth around to layers n.exc 25 cm including removal of surplus soil to a distancen.exc 50 mtr and making good surfaces complete all as specified and as directed.

Supply and fix mild steel angle iron for fencing posts and struts including cutting tops to shape, as directed, drilling holes, notching for wire etc flat iron fillets for securing wire mesh including all necessary drilling, bolting or revetting etc and similar work like gates etc conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C2, (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Supply and fix mild steel bolts, 10 mm dia and 65 mm long, purpose / machine made with hexagonal head or square hed one end and crewed on other end, each screwed end to be fitted with washer and on hexagonal or square nut complete all as specified and as directed.

Supply only chain link MS Galvanised fencing size or type made cut from GI wire 4mm dia and 50x50 mm apperture complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh,size & type to any type of standards, rails straining bolts etc including provision of binding wire complete all as specified and as directed. NOTE: Chain link fencing shall be measured and paid as separately as supply only.

Supply and fix in repairs galavanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed. NOTE: Each line of wire to be measured.

Supply and fix Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for preparation of steel and iron surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as specified and as directed.

Demolition of Brickwork or stone/ precast concrete articles concrete block walling masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework etc complete all as specified and as directed.

M&L Precast cement concrete (1:3:6) block masonry with solid blocks of type C-1(using 20mm graded stone aggregate) exc 10 cm in width or girth and setting in CM (1:6) complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar incl all quions, arches, pillars etc. but excluding ashlar fencing, dressed stone work and precaste concrete articles all as specified and as directed.

M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exc 6 mtr radious built in cement mortar (1:6) complete all as specified and as directed.

M&L for Providing, plain cement concrete (1:3:6) Type C2 (using 40mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, incl necessary form work fair finished of exposed surfaces of concrete and making good with existing surfaces all as specified and as directed.

M&L for taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key srubbing down with water etc all as specified and as directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surface in CM (1:4) finished even and smooth without using extra cement all as specified and as directed.

Demolition for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling all as specified and as directed.

M&L for 35 mm thick precast cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) louvres and jallies, (mea sured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately) setting in cement mortar (1:4) complete all as specified and as directed.

M&L for 25 mm thick precast cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) louvres and jallies, (mea sured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately) setting in cement mortar (1:4) complete all as specified and as directed.

M&L for preparation of newly pastered surfaces and applying three coat of white wash on newly plastered surfaces on wall all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of whitewash complete all as specified and as directed.

M&L for demolition of RCC of any description and in any position not otherwise specifically provided for including cutting of reinfocement as required to faciliate demolition complete all as specified and as directed.

M&L for RCC (1:2:4) type B1 using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels, bands etc incl demolition of existing RCC and removing rubbish off the premises complete all as specified and as directed.

M&L for use and removal of steel formwork to sides and soffits of lintels, bands etc for rough finished surfaces of concrete flat complete all as specified and as directed.

Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required including crancking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not les than 0.90 mm dia complete all as specified and as directed.

All as per item No 27 above but 8 to 10 mm dia in stirrups complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) pipe for weep holes, incl rubber ring joints to laid in trenches or in floors complete all as specified and as directed.

M&L for 150mm broken stone or boulders, hand packing at back of walls complete all as specified and as directed.

Demolition and breaking up old broken, PVC (SWR), Cast Iron, Reinforced concrete pipes, SWG soil waste and vent pipe of 300 mm bore incl accessories set in cement and removing rubbish from site complete all as specified and as directed.

M&L for Reinforced concrete pipes, class NP2, laid and jointed completed with collars and 300mm bore complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, beded and pointed in any mortar complete all as specified and as directed.

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick complete all as specified and as directed.

Material and labour for 75mm thick plain cement concrete (1:3:6) type C2, using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.

Material and labour for 50 mm thick plain cement concrete (1:3:6) type C2, using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.

M/L cement concrete polished coloured chequered cement concrete tiles of size 30cmX30cm X 25mm set, jointed and pointed in neat cement slurry with grey cement and pigment set jointed and pointed in neat cement slurry over 15mm thick screed bedding layer in CM (1:6) complete all as specified and as directed.

M/L machine pressed polished precast concrete interlocking paver block conforming to IS-15658-2006 of 60mm thick, M-35 Grade of any shape or color with mixture of grey cement and pigment complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including spreading, levelling, watering and consolidation cushioning 40mm thick complete all as specified and as directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

DEDUCT AMOUNT OF SCHEDULE OF CREDIT

SUNIL PRADHAN

PRASAD PRADHAN AND SON

SANJAY SAW MILL

M/S JAYSHREE CONCERN

HEM RAJ GURUNG

MANOJ JINDAL

MS BRAHMA CONSTRUCTION