CONSTRUCTION OF SINGLE ACR AT GOVT MIDDLE SCHOOL CHHURTA ZONE DANSAL DISTRICT JAMMU.

Amount

Earth work in excavation in foundation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-5(1:5:10) grade, with 40mm nominal size of (nallah stone aggregates).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-10(1:3:6) grade, with 20mm nominal size of nallah stone aggregates.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates.

Providing and laying in position cement concrete of specified grade of reinforced cement concrete, excluding the cost of centering and shuttering. in 1:1.5:3 (1 cement:1.5 coarse sand: 3 graded stone aggreate 20mm nominal size in suspended floors, balconies,landings and staircase having upto 15 degree slope excluding cost of centering and shuttering.All work upto floor V level.

Reinforcement of R.c.c work in plinth band incl. straightening, cutting, bending, placing in position and binding all complete.

Brick work with F.P.S bricks of class designation 75 in 1:6 (cement: sand) mortar.

Centring and Shuttering including strutting, propping etc and removal of form work for foundation , footings , basis of columns etc. for mass concrete.

Centring and Shuttering including strutting, propping etc and removal of form work for Suspended floors, roofs , landings , balconies and access platform.

Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls under 20 cm wide

Steel work welded in built up section/framed works including cutting,hoising,fixing in position and applying a primer coat of approved steel primer using structural steel primer as required for doors and windows frames.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 1 Omm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x1 Ox15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

Cement plaster in 1:6 ( 1 cement:6 fine sand ) ,15 mm thick.

12 mm thick plaster in 1:4 ,Mix.( 1 cement:6 fine sand )

Providing and fixing paneled or paneled or glazed shutters for doors and windows and clestory windows including ISI marked black enameled M.S butt hinges with necessary screws, including paneling which will be paid separately.(35 mm thick of first class kail wood).

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm

Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.150x10mm

Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:125 mm

Extra on item no-14) towards the cost providing and fixing of 4mm thick glass panes.

Cement concrete flooring in (1:2:4), finishing with a floating coat of cement slurry, but excl. the cost of nosing of steps etc. complete.40mm thick.

Providing fixing and incorporating glass strips nominal size of 35 mm x 4 mm) under flooring.

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades including priming coat.

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade

Making plinth protection 50mm thick with cement conc .(1:3:6) ,20 mm nominal size of stone aggregates over 75mm bed of dry brick ballast,40mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete.

Providing and fixing on wall face unplasticised - Rigid PVCrain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10 sqm

Providing and fixing electic point complete in all respects as per directions of Engineer incharge

Forming grooves of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the grooves complete as per specificatiOns and direcUon of the Engineer-in-charge 13.83.1 15mm wide and 15mm deep groove metre 35.25

Making Blackboard (1no.)one in each class room in cm (1:4) with side patti complete in all respect as per drawing (paid as L S).

Writing name of school along with other drawings through painter as per instructions of engineer-in-charge

Carriage of materials by mechanical transport inculding loading / unloading and stacking complete. Sand lead up to 30 kms.

Carriage of materials by mechanical transport inculding loading / unloading and stacking complete. Stone aggregate below 40 mm lead up to 25 kms.

Carriage of materials by mechanical transport inculding loading / unloading and stacking complete. Bricks lead up to 50 kms.

M/S GURDEV SINGH

M/S RAJ KUMAR