REPAIRS TO INTERNAL WATER SUPPLY LINES CLEANING OF WATER TANK REPAIRS TO STAIR CASE PLINTH PROTECTION FLOOR TILES WALL TILES IN TOILETS PLUMBING SANITARY FITTINGS ROOF SHEETING FALSE CEILING WALL PANELLING INTERNAL ELECTRIFICATION OF PERMANENT BUILDI

Amount

Cleaning and removing all scale and dirt etc from PVC/ RCC tank of capacity 250 ltrs from mouth of circular pipes etc., complete all as specified and as directed by Engr-in-charge.

All as per item No. 01 here-in-before but capacity exc 250 and n.exc 500 ltrs.

All as per item No.01 here-in-before but capacity exc 500 and n.exc 1000 ltrs.

Petty repairs to leakage of bib taps, pillar cock stopcock PVC connection waste pipes float valves, angle valve, concealed valve GI union joints of GI pipe Re-fixing of bottle trap etc by changing the PVC washers/Sheet washers or any other minor accessories etc complete all as specified and directed .

Petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flush complete all as directed.

Supply and fix in repairs threaded type PVC tank covers with all fixing accessories for PVC tanks for capacity 250/500/1000 Ltrs fixed with screws complete all as specified and as directed by Engr-in-charge.

Taking up or down 20mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge.

Taking up or down 25mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including clamping to walls complete all as specified.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including clamping to walls complete all as specified.

Supplying and fixing of 25 mm dia CPVC union complete all as specified.

Dismantling PVC water tank of capacity exc 250 Ltrs and n.exc 500 ltrs and removing complete all as specified and as directed by Engr-in-charge.

Dismantling PVC water tank of capacity exc 500 and n.exc 1000 ltrs and removing complete all as specified and as directed by Engr-in-charge.

S & F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I

S & F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I

Supply and fix for 25mm dia bore ball valves, high pressure of PTMT, with epoxy coated alu rod highdensity plastic ball complete, screwed for iron pipe or brass ferrule and fixed (Minimum weight 455 gms) complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 25mm dia bore ball valves, high pressure of PTMT, with epoxy coated alu rod highdensity plastic ball complete, screwed for iron pipe or brass ferrule and fixed (Minimum weight-142 gms) complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 20mm dia bore ball valves, high pressure of PTMT, with epoxy coated alu rod highdensity plastic ball complete, screwed for iron pipe or brass ferrule and fixed complete (Minimum weight-210 gms) all as specified and as directed by Engr-in-charge.

Supply and fix in repairs PVC connection 15mm size PTMT nuts length 450mm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets connecting union overall size 914x460x203mm with bowl size 405x354x203mm fixed complete all as specified and as directed by Engr-in-charge. Make Prayag/Parryware/Kohler/Marc.

Supply and fix in repairs Brass wall mixer, Chromium plated 3 in 1 system with provision of both telephone shower and overhead shower complete with 115 mm long bend pipe and wall flange all as specified and as directed by Engr-in-charge. Make Parryware/Jaquar/Johnson/Kohler/Marc.

Supply and fix in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed by Engr-in-charge. Make Parryware/Jaquar/Johnson/Kohler/Marc.

Supply and fix in repairs Angular stop cock 15mm bore, brass, chromium plated, fancy type conforming to IS, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed by Engr-in-charge. Make Parryware/Jaquar/Johnson/Kohler/Marc.

Supply and fix in repairs Pillar tap 15 mm bore, brass with capstan heads, chromium plated, fancy type, long Neck with aerator conforming to IS, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed by Engr-in-charge. Make Parryware/Jaquar/Johnson/Kohler/Marc.

Supply and fix in repairs 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs flexible PVC waste pipe suiteable for wash hand basin and Kitchen Sink all as specified and as directed

Supply and fix Over head shower rose with arms, ABS body chromium plated with revolving joint and 125 mm dia round shaped single flow with rubit cleaning system all as specified and directed by Engr-in-charge. Make Parryware/Jaquar/Johnson/Kohler/Marc.

Supply and fix in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge. Make Prayag/Parryware/Johnson/ Kohler/Marc

Supply and fix as in repairs tubular towel rail brass chromium plated, 20mm dia D type, 60cm long between flanges complete all as specified and as directed by Engr-in-charge. Make Parryware/Jaquar/Johnson/Kohler/Marc.

Supply and fix in repairs towel ring chromium platedcomplete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-in-charge. Make Parryware/Jaquar/Johnson/Kohler/Marc.

Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC).

Supply and fix in repairs vitreous china wash down water closet pedestal pattern white including trap connections to drain and to flush pipe anti-syphonic pipe etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs PVC valveless, syphonic action, flushing cistern low level 10 ltrs capacity, white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high quailty PVC 32mm dia complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs Toilet Paper Holder with flap recessed type made out of stainless steel, chromium plated complete all as specified and as directed by Engr-in-charge. Make Parryware/Jaquar/Johnson/Kohler/Marc.

Supply and fix in repairs Soap dish, matt finished, chromium plated (MCH/Colour CP) complete all as specified and as directed by Engr-in-charge. Make Parryware/Jaquar/Johnson/Kohler/Marc.

Supply and fix Stainless steel Plate rack of size 780mm x 910 x 250mm (31"x36"x10") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI-304 and fixed in repairs complete all as specified and as directed by Engr-in-charge. Make Prayag/Parryware/Jaquar/Kohler/Marc.

Demolition of cement concrete ( unreinforced) in ground floors and paving n. exc 15 cm thick ( below & above ground level) and removal & rubish of Premises exc 250 m but n exc 500 m complete all as specified

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring, including finishing surface even & smooth without using extra cement complete all as specified

M&L for 3 mm thick & 38 mm wide glass dividing strips inserted in position conform to design all specified

M&L 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded aggregate as in plinth protection, including finished even and smooth without using extra cement all as specified

Material and labour for preparation of old decorated surfaces of walls by by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent walls and trading oil and greasy spots and applying one coat of cement based paint white or tinted complete all as specified and as directed by Engr-in-charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the permises etc complete all as specified and as directed by Engr-in-charge.

Material and labour joint free non skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge.

M & L for glazed ceramic colour tiles of 7-8mm thick as on skirting/ dado over 10mm thick cement plastering in CM 1:4 complete all as specified and as directed by Engr-in-charge.

Material and labour for light shade vitrified ceramic coloured tiles10mm thick (square/ rectangular) polished area of each tile n.exc 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge.

All as per item No.50 here-in-before but on vertical surfaces over 10mm thick screed plaster in CM 1:4.

M&L for machine cut kota stone slab flooring, steps 20-25 mm thick over cemet screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20 mm screed bed in CM 1:6

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete over 10 mm thick back coat in CM 1:4

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F 75 mm bore PVC (SWR) pipes single socket in any length with rubber ring jointed to fixed to wall complete all as specified

All as per item no.55 above but 110 mm bore

S & F 75 mm PVC (SWR) bends any radius complete all as specified

All as per item no.57 above but 110 mm bore

S&F 75 mm PVC (SWR) junction single (Single T) equal or unequal all as specified

All as per item no.59 but 110 mm bore

S&F 75 mm PVC (SWR) branch piece single (single Y) equal or unequal all as specified

All as per item no.61 above but 110 mm bore

Taking down cement plaster or concrete etc including racking out joints hacking for key scrubbing down with water etc complete all as specified

M&L 15 mm thick rendering into two layers consisting 10 mm thick in CM 1:4 followed by 5 mm thick in CM 1:4 with WPC on fair faces of brick work or concrete surface including finished even and fair all as specified. (Note WPC shall be measured and paid separately)

Supply only integral water proofing compound all as specified

M&L 10 mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 including finishing even and smooth without extra cement all as specified

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted over a coat of chalk whitening primer complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted over a coat of chalk whitening primer complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) floor trap Plain with grating including jointing with solvent cement 75 mm

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15 mm thick screed bed in CM 1:4

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exc 1.5 but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fix powder coated anodised sliding/hung type aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed

S & F powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 and minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised luminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, hold fast, Butt hinges, hold fast, lock strike plate, including PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works, including PCC 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame etc complete, size of frame 125x60mm incl bottom of each chowkat complete all as specified.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed.

S & F 35 mm thick 2nd class hardwood partly glazed and skeleton and party panelled shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as spd in SSR Part -I, Sec 8, clause 8.24 (b).

Supply and fix PVC door frame of size 50x47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and as directed by Engr-in-charge.

Supply and fix factory made solid panel PVC moulded door shutter, 28 to 30 mm thick (styles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, in frame at site complete all as specified and as directed by Engr-in-charge.

Supply and fix 100mm size stainless steel hinges, medium weight complete all as specified and as directed by Engr-in-charge.

Supply and fix 150 mm long stainless steel tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge.

Supply and fix door handle, 125mm size, stainless steel, complete all as specified and as directed by Engr-in-charge.

Supply and fix 300mm long stainless steel, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Material and labour for preparation of new steel surfaces over 10 cm girth and applying two coat of synthetic enamel painting over a coat of zinc primer complete all as specified and as directed by Engr-in-charge.

M&L Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer.

Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and as directed by Engr-in-charge.

Material and labour for old size brick work with sub class 'B' bricks straight or curved on plan exc 6m mean redius built in CM 1:4 complete all as specified and as directed by Engr-in-charge.

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed.

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- Make of cable : Plaza/Polycab/Finolex/ Havells.

One light/ fan/ exhaust fan/ 3 pin socket independent board/ buzzer point controlled by one switch.

One 3 pin socket outlet 5 Amps,same board with cables 1.5 Sqmm size.

One light point controlled by two 2- way switches, with cable 1.5 Sqmm size.

All as per item ser no-92 above here in before but one 3 pin socket outlet 5/15 Amps, independent board with cables 4.0 Sqmm size.Make :- Polycab/Finolex/Plaza

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC casing & caping/fixed on wall/roof/ceiling etc of size not less than 20 mm dia including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- Make for PVC casing & caping: SUDHAKAR / AVON PLAST /PLAZA , Make for Copper cable: Finolex/Polycab / Plaza/ Havells.

One light point controlled by one switch.

One 3 pin socket outlet 5 Amps, independent board with cables 1.5 Sqmm size.

All as per item ser no-94 above here in before but one 3 pin socket outlet 5/15 Amps, independent board with cables 4.0 Sqmm size. Make :- Polycab/Finolex/Plaza/ Havells.

M&L for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed /PVC conduit of appropriate size as specified for the following sizes. Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately. 2. Rates are including taking down old unserviceable. Make for Copper cables: Finolex/ Polycab / Plaza/ Havells. Make of PVC Conduit: SUDHAKAR/FINOLEX/AVON PLAST.

2x 4.0 sqmm and 1x 4.0 sqmm as earth wire

2x 6.0 sqmm and 1x 6.0 sqmm as earth wire

S&F for switch piano, flush type single pole , one way 5 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for bell push flush type, 5 Amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for switch piano, flush type single pole , two way 15 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for Lamp holder angular/batten type, PVC/ polycarbonate type with back plate complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc and including taking down old all as specified and as directed by Engr-in-Charge . Make: Anchor/Cona/Leader/Lisha.

Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. all as specified and as directed.

Supply and fixing in repair of GI metal flush box suitable for mounting moduler plate of following modules:-

1 or 2 Module

3 Module

4 Module

6 Module

8 Module

12 Module

Supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for following modules:-

Cover plate with frame 1 Module

Cover plate with frame,2 Module

Cover plate with frame,3 Module

Cover plate with frame,4 Module

Cover plate with frame,6 Module

Cover plate with frame,8 Module

Cover plate with frame,12 Module

Supply and fixing in repair of modular switch one way 5/6 A white Active one module all as specified and as directed by the Engineer-in-Charge

Supply and fixing in repair of modular switch socket combination 16 A, 6 pin 3 module flush type Active white two module complete all as specified and as directed by the Engineer-in-Charge .Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of modular switch socket combination 5 Amp, 5 pin flush type Active white two module complete all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of modular fan step regulator,120 W-2 module all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair modular bell push 6 A one module complete all as specified and as directed.

Supply and fix Eco compact wall mounted LED batten for T8 LED tube with ULTRON high efficency LED polycarbonate tube with in built driver and metal heat sink 18 watt icluding taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge.Make : Crompton/philips/wipro/Havells, Surya.

Supply and fix high efficiency wall mounted LED batten type not less than 9W 2 ft LED light fitting and including taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge .Make : Crompton Cat ref CCS-103-10-65--SL-DP--NWH 10W/Philips/wipro/Havells, Surya.

Supply and fix Energy saving not less than 25 Watts LED light fitting ,IP65 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damaged all as specified. Note:- Make :SURYA /Philips/wipro/Havells.

Supply and fix ceiling fan 230 V, 1200mm smart saver-50 of Orient or equivalent of Crompton/Bajaj/Usha

Material and labour for Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level , with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected with and incl GI earth wire 4mm dia including alternate 5 layers of charcoal, salt crystal and including 15 mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5 mtr and connecting to test point, LT Switchgear etc as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in elecrical plate No 3 of SSR Pt- I including testing on completion complete all as specified and as directed. Note:(i) Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil , site clearance etc.

Supply and fix Exhaust fan 300 mm Sweep and frame and louvers, 230 volts,50Hz. Make:- Khaitan/Crompton/Bajaj/Usha

S&F for Rigid PVC junction box three way 25 mm surface mounted four hole type for 5 Amp independent board complete with screw not and bolt all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader/plaza/AKG

S&F for Rigid PVC junction box three way 32mm surface mounted four hole type for 15 Amp independent board complete with screw not and bolt all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader/plaza/AKG

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC cool white (or) warm white colour, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fix for round/ square recessed mounted LED panel luminire not less than 18 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton .

Supply and fix for round/ square recessed mounted LED panel luminire not less than 15 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton .

Supply and fix for round/ square recessed mounted LED panel luminire not less than 9 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton .

Supply and fix for decorative wall mounting fixture with plastic body suitable for 9 W LED lamp B22 base. Note: Bulb shall be measured and paid under respective item of schedule. Make:- Havells / equivalent make from Crompton/ Surya/ Philips/ Wipro.

Supply and fix BEE Rated LED Lamps 9W - B22 / E27 Crompton/Bajaj/Usha

Supply and fix BEE Rated LED Lamps 14W - B22/ E27 - Crompton/Bajaj/Usha

S& F for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one SP MCB 20-32 Amps. Make: Legrand/ Siemens/Scheneider/ABB

M&L for cutting chases on brick walls concrete surfaces not exc 10 cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes all as directed by Engr in charge.

BALA BUILDERS

Green Ray Technologies

R.P.TRADERS

SIVA ENTERPRISES

VKR ENTERPRISES