Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l-1₹9.2 LAccepted-AOC | l-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | l-2₹11.6 L+₹2.4 L (26.5%)Rejected-Finance HOUSE NO 102 LANE NO 4 C ANAND NAGAR BOHRI JAMMU 180002 J K | JAMMU | JAMMU AND KASHMIR | 180002 | l-2 | Rejected-Finance Higher side quoted amount | |
| 3 | l-3₹12.9 L+₹3.7 L (40.3%)Rejected-Finance | l-3 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
2 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
REPAIR/REPLACEMENT OF ELECTRIC POLES, ACSR CONDUCTORS, AND OTHER EXTERNAL ELECTRIFICATION ALLIED WORKS AT KHALTSI AND LAMAYURU IN THE AOR OF AGE BR-II KHALTSI UNDER GE KHUMBATHANG
2022_MES_556189_1
80051/100/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Khaltsi
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹30,000
8 Dec 2022
6 Oct 2022
3 Nov 2022
6 Oct 2022
2 Nov 2022
20 Oct 2022
Amount
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for laying of cable/pipe & getting out of hard/dense soil complete all as specified and directed by Engr-in-Charge.
Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in hard/dense soil complete all as specified and directed by Engr-in-Charge.
Removal of excavated soil to distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.
Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I complete all as specified and directed by Engr-in-Charge. (Note:-Punned thickness shall be measured and paid)
Supplying and laying unreinforced precast concrete cable cover, class LV, type 1 flat of size 250mm x150mm x 40mm placed perpendicular of the cable complete all as specified and directed by Engr-in-Charge.
M&L for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in pole/stay/plinth etc. as in foundation filling and mass concrete, complete all as specified and directed by the Engr-in-Charge.
M&L for Cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate in coping pedestal to poles including provision of necessary form work finishing the exposed surface even and smooth complete all as specified.
Supply , laying , connecting & testing in repair XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq. mm 4 core incl taking down old cable complete all as specified and directed.
All as per Srl item No.8 here-in-before but cross sectional area 25 sq. mm 4 core
All as per Srl item No.8 here-in-before but cross sectional area 35 sq. mm 3.5 core
All as per Srl item No.8 here-in-before but cross sectional area 50 sq. mm 3.5 core
All as per Srl item No.8 here-in-before but cross sectional area 70 sq. mm 3.5 core
S&F in repair GI Pipe Light grade with all connected accessories of sizes 80 mm dia laid for cable protection under road crossing, or fixed to wall/pole completed as directed for cable protection complete all as specified and directed by Engr-in-Charge.
S&F in repair Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending (cold or hot), drilling holes for bolts, bent to any shape or size as directed and inclusive of one primer coat of red oxide, one under coat of zinc oxide and one finishing coat of aluminium paint complete all as specified and directed by Engr-in-Charge.
S&F in repair pin type porcelain vitreous white, brown insulator 100mm height, 65mm dia for 1100 volts grade working pressure complete all as specified and directed by Engr-in-Charge.
S&F in repair shackle type porcelain vitreous white, brown insulator 75mm height, 90mm dia for 1100 volts grade working pressure complete all as specified and directed by Engr-in-Charge.
S&F in repair loop type porcelain vitreous white, brown insulator large size, with overall dimensions 90mmx140mm, clearance of hole 25.5mm for working pressure 1100 volts complete all as specified.
S&F in repair Stay assembly complete with GI stay rod 16 mm dia 1800 mm long, MS plate 230x230x6 mm, stay bow, loop insulator, PCC 1:3:6, connecting bracket of suitable MS flat and nut bolt washers etc complete all as specified in electrical plate No 1 of SSR Part-1 including taking out old stay assembly. (Note;-excavation and PCC measured and paid separately)
S&F in repair galvanised steel standered wire size 7/3.15mm for stay assembly complete all as specified and directed.
S&F in repair galvanised steel wire 3.15 or 4mm dia for guarding under over head line with two parallers GI wires (Guarding wires) shall run below the conductor and shall be supported on MS angle of prescribed size, crossing facing of GI wire shall be provided at every 1 mtr interval throught the crossing and guarding shall be erected with ground & line clearance as per the I.E rules, of including dismantling of Cradles, hexagonal/rectangular, fabricated complete all as specified and directed.
S&F in repair ACSR conductor for LT line of (weasel) , size as per existing unservicable conductor , straching properly on insulators and binding with aluminium binding wires,jumpers including fixing on insulators on each poles in span and tightening with permissible sag in between span etc complete all as specified and as directed by Engineer-in-charge. Note:-3% for sag shall be added in measurement
S&F in repair MCCB 63 Amps 16 KA, 4 Pole rupture capacity with adjustable thermal & fixed magneting setting complete all as specified and directed.
S&F in repair MCCB 100 Amps 25 KA, 4 Pole rupture capacity with adjustable thermal & fixed magneting setting complete all as specified and directed.
S&F in repair MCCB 160 Amps 36 KA, 4 Pole rupture capacity with adjustable thermal & fixed magneting setting complete all as specified and directed.
S&F in repair MCCB 200 Amps 36 KA, 4 Pole rupture capacity with adjustable thermal & fixed magneting setting complete all as specified and directed.
S&F in repair MCCB 400 Amps 36 KA, 4 Pole rupture capacity with adjustable thermal & fixed magneting setting complete all as specified and directed.
S&F in repair Changeover switch on load of capacity 100 Amps, 415 volt, 4 pole, with metal enclosure box, including replacement of incoming and outgoing cable connectiones with aluminium conductor cable, lugs, nuts ,bolts etc.
S&F in repair Changeover switch off load of capacity 200 Amps, 415 volt, 4 pole, with metal enclosure box, including replacement of incoming and outgoing cable connectiones with aluminium conductor cable, lugs, nuts ,bolts etc.
S&F in repair Changeover switch off load of capacity 400 Amps, 415 volt, 4 pole, with metal enclosure box, including replacement of incoming and outgoing cable connectiones with aluminium conductor cable, lugs, nuts ,bolts etc.
M&L for removing HT/LT over head conductor from the insulator where ever required and re-stretching the same without any kink/bend upto permissible sag, binding it on insulator by means of binding wire and testing the HT/LT overhead line after completion complete all as specified and directed by Engr-in-Charge. (Note: 3/4 runs of HT/LT overhead conductor for three phases and neutral shall be measured and paid as one length.)
Cleaning the extend exposed surfaces of steel tubular pole of 9 Mtr long including with cross arms, brackets clamps etc and painting complete ( Except embedded portion) including all MS work mounted on pole, earth potection with two coat of aluminium paint and with synthetic enamel paint (black and yellow straps 30 cm wide each up to 1.5m hight) from top of plinth block and numbering of poles with white synthetic enamel paint on black ground complete all as specified with painting of top of pole with silver paint. Complete all as specified and directed by Engr-in-charge
S&F in repair cable jointing kit for 1.1 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 Sqmm complete all as specified and directed by Engr-in-Charge.
S&F in repair cable end jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and directed by Engr-in-Charge.
S&F in repair cable jointing kit for 11 KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed by Engr-in-Charge.
S&F in repair cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed by Engr-in-Charge.
M&L for in repair Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed by Engr-in-Charge.
M&L for in replacement Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed by Engr-in-Charge.
S&F in repair GI pipe medium grade 40mm dia including embedded in PCC for fixing Air termination rod 12mm complete all as specified and directed by Engr-in-Charge.
M&L for Air termination, single pointed aluminium rod 12mm dia and 300mm long
S&F in repair LED Solar street light fitting 20 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete all as specified and directed by Engr-in-Charge. (Excavation & earth work shall be measured separately)
Supplying, transporting, erecting and fixing steel tubular swaged poles in repair type 410 SP-31 (9.0 metres long) complete with cast iron base plate, finial, taper plug, bolts, nuts and screws as specified, including necessary excavation and earth work, PCC 1:4:8 type D-2 in foundations below pole, PCC 1:3:6 type C-2 around poles and PCC 1:3:6 type C-1 as in plinth block, disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, painting steel tubular poles exposed surfaces with aluminium paint two coats over one coat of red oxide primer and providing 300 mm wide bands (3 bands/straps with synthetic enamel paint and 2 bands with black bituminous paint) from plinth block and numbering of poles, painting embedded portion of poles with one coat of bituminous paint complete all as specified and directed. Note:-PCC work will be measured and paid separately.
S&F in repair post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 35,586.00 and any other reduction if any from quoted amount.
SUMEET TRADING CORPORATION
M/S Web Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .