Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹17.5 LAccepted-AOC | 1 | Accepted-AOC Bid Accepted as lowest Bidder | |
| 2 | 2₹19.0 L+₹1.5 L (8.53%)Rejected-Finance PUNJAB FEROZEPUR | FIROZEPUR | PUNJAB | 142044 | 2 | Rejected-Finance Not recommendable as higher tender rate | |
| 3 | 3₹19.1 L+₹1.7 L (9.45%)Rejected-Finance NEAR LAKAR KANDA DARSHAN SINGH MC WALI GALI PREM NAGAR KOTKAPURA | SRI MUKTSAR SAHIB | PUNJAB | 151202 | 3 | Rejected-Finance Not recommendable as higher tender rate | |
| 4 | 4₹19.2 L+₹1.7 L (9.67%)Rejected-Finance | 4 | Rejected-Finance Not recommendable as higher tender rate | |
| 5 | 5₹2.7 Cr+₹2.5 Cr (1422.3%)Rejected-Finance | 5 | Rejected-Finance Not recommendable as higher tender rate |
Tender Value
Refer Docs
EMD Value
₹26,607
Closing Date
23 Feb 2023, 10:00 amClosed
Executive Engineer,Harike Canal Division,Ferozepur
Executive Engineer,Harike Canal Division,Ferozepur
Estimate for Repairing and Replacing of gates and gearing system of Cross regulator at RD 258170 of Sirhind feeder.
2023_WR_96103_3
009/Harike Canal Division/2022-23
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
30 days
Executive Engineer, Harike Canal Division, Ferozepur
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
₹26,607
Yes
3 May 2023
3 Feb 2023
23 Feb 2023
3 Feb 2023
23 Feb 2023
3 Feb 2023
Providing and Fixing of Gate 554.40 155.00 KG 85,932.00 wheel assembly complete in all respects and to entire satisfaction of Engineer in-charge.
Providing Gun Metal Bush Assembly complete in all respects and to entire satisfaction of Engineer in-charge
Providing of roller pin in position complete in all respects and to entire satisfaction of Engineer in-charge. (upto 75mm /above 75mm Dia.)
Providing of Hook pin in position complete in all respects and to entire satisfaction of Engineer in-charge. (upto 75 mm /above 75 mm Dia.)
Threading of pins, complete in all respects and to entire satisfaction of Engineer in-charge upto 75 mm
Providing hollow bulb seal and fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in-charge. (100/44 mm)
Providing fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in-charge (75 x12 mm)
Providing and Fixing Stainless Steel nut and bolts of all sizes and length required complete in all respects
Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer in-charge
Providing & fixing clamp plate for seals complete in all respects
Providing and Fixing bottom & side seal square Bar support
Providing and Fixing skin plate for Gates (10 mm)
Providing and fixing horizontal & vertical stiffner on Gates
Providing and fixing Hook Plates on Gates
Providing and fixing stiffener Angle on Gates
Providing and fixing of Gate wheel cover Plate 10 mm
Fillet welding with strength steel rods complete in all respects and to entire satisfaction of engineer incharge
Dismantling of central drive unit & rope drum at site complete in all respects
Dismantling of damaged wire rope/de-linking gates and Hoist Mechanism complete in all respect and to entire satisfaction of engineer incharge
Supply of installation of new steel wire rope in position including linking gate and host mechanism for smooth balance operation including oiling and greasing complete in all respects as per specification 637 IS Code 2266 and to entire satisfaction of engineer-in-charge. (Size 20-30 mm dia.)
Providing & fixing U-Clamps for steel wire ropes.
Overhauling of gate mechanism of all types including dismantling, greasing, oiling and re-installation of mechanism complete in all aspects. (upto 10 feet width of gate)
Painting two or more coats of anticorrosive bitumastic paint to give an even shade
Applying Priming coat with metal primer on new steel or iron work including preparation of surface
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic, plastered or concrete surfaces to give an shade.
Scrapping , brushing to remove paint to bare metal surface
Commissioning and testing of gates at site complete in all respects and to entire satisfaction of Engineer incharge
Dismantling, loading/unloading and refitting of gates at site with the help of 35 tonne capacity crane.
Removing, providing & fixing bearing bracket, complete in all respects
Removing, providing & fixing bearing, complete in all respects
Any Other
Vishalsood Govt contractor
M/S DARSHAN SINGH CONTRACTOR
ANJU INDUSTRIES
THE AMIR KHAS COOP L AND C SOCIETY LTD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .